100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
COMPONENT CATALOG

Search the part. Verify the offer.

Search by full manufacturer part number, manufacturer or category. Review the available product record, then add exact parts to one RFQ or send a BOM for sourcing review.

BROWSE THE CATALOG

Browse by manufacturer or category

FIND YOUR COMPONENT

2627 component profiles

Filter the published reference records below. If your exact ordering code is not listed, send it through RFQ rather than relying on a similar part number.

Showing 24 of 316 published records · Availability confirmed with your quote.
Part numberManufacturerFamily / packageAction
Analog ICsLM358DR

LM358DR is a dual general-purpose operational amplifier from Texas Instruments in an 8-pin SOIC package — for signal conditioning, active filters and comparator-with-hysteresis circuits. The single-supply operation down to 3 V is the selection point: it runs directly from the same rail as 3.3 V and 5 V logic, which is why the LM358 remains the default jelly-bean op-amp. Selection advice: the DR suffix denotes SOIC-8 on tape and reel — the LM358 ships in PDIP-8 and other packages, so match the full LM358DR code to your footprint. For new precision designs, compare against newer low-offset op-amps; for cost-driven general-purpose use, this is the part. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerTexas Instruments
Family / packageOperational amplifierSOIC-8
Analog ICsNE555DR

NE555DR is the industry-standard 555 precision timer from Texas Instruments in an 8-pin SOIC package, for oscillation, delay and pulse-generation circuits. Its advantage is ubiquity: the 555 architecture has been in continuous production for decades, so designs, application notes and engineer familiarity are universal — but that ubiquity is also the procurement risk, because the open market carries remarked and substandard copies. Selection advice: DR denotes SOIC-8 on tape and reel; always quote the full NE555DR code and require lot and date-code traceability rather than accepting loose or unmarked stock. For new designs, confirm whether your circuit needs the bipolar NE555 or the CMOS LMC555 variant — they are not interchangeable in all applications. State quantity, packing and traceability requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerTexas Instruments
Family / packagePrecision timerSOIC-8
Analog ICsTL072CDR

TL072CDR is a dual low-noise JFET-input operational amplifier from Texas Instruments in an 8-pin SOIC package, for analog signal paths — audio preamps, active filters and sensor buffers. The JFET input stage is the selection-relevant advantage: very high input impedance and low input bias current, which suits high-impedance sources that would be loaded down by bipolar-input amplifiers. Selection advice: the CDR suffix denotes the commercial-grade SOIC-8 on tape and reel — the TL07x family spans single, dual and quad variants across grades and packages, so match the full TL072CDR code. For new low-noise designs, also evaluate current-production JFET or CMOS alternatives against your noise and bandwidth budget before committing. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerTexas Instruments
Family / packageJFET-input operational amplifierSOIC-8
Analog ICsOPA2134UA

OPA2134UA is a dual low-distortion operational amplifier from Texas Instruments in an 8-pin SOIC package — for precision audio designs, preamplifiers and active crossovers. The FET input with very low distortion is the selection point: it replaced the NE5532 in high-end audio where input bias current and distortion matter. Selection advice: the UA suffix denotes SOIC-8 — the OPA2134 also ships in PDIP-8 (PA suffix), so match the full OPA2134UA code to your footprint. Confirm your supply voltage and distortion requirements against the datasheet before substituting for the NE5532. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerTexas Instruments
Family / packageAudio operational amplifierSOIC-8
Analog ICsMCP6002-I/SN

MCP6002-I/SN is a dual low-power rail-to-rail operational amplifier from Microchip Technology in an 8-pin SOIC package — for sensor interfaces and battery-powered signal chains. The rail-to-rail input/output on a 1.8 V to 6 V supply is the selection point: full signal swing from a single low-voltage rail, which is exactly what 3.3 V sensor nodes need. Selection advice: the I/SN suffix denotes the industrial temperature grade in SOIC-8 — the MCP6002 ships in multiple packages, so match the full MCP6002-I/SN code to your footprint. Confirm your gain-bandwidth and offset requirements against the datasheet; this is a low-power part, not a precision part. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerMicrochip Technology
Family / packageRail-to-rail operational amplifierSOIC-8
Analog ICsAD620ARZ

AD620ARZ is an Analog Devices low-power instrumentation amplifier (A grade) in 8-pin SOIC — gain set from 1 to 10,000 with a single external resistor, for bridge sensors, strain gauges and other small differential signals. The single-resistor gain setting is the selection point: a classic three-op-amp instrumentation topology in one package with high common-mode rejection and minimal external circuitry, which shortens precision front-end design. Selection advice: ARZ is the standard A grade in SOIC-8, tube packing — the reel versions are AD620ARZ-REEL (13-inch reel) and AD620ARZ-REEL7 (7-inch reel), so match the full code to your footprint, accuracy grade and line format. For tighter offset — 50 µV max at 25 °C with VS = ±5 V to ±15 V (85 µV max over temperature) — choose the B-grade AD620BRZ-R7. Gain is set by one resistor value, so confirm your gain calculation against the datasheet formula during design. Evidence: ADI AD620 datasheet Rev. H specifications (Table 2) and the ADI AD620 Part Models page (lists ARZ, ARZ-REEL7, BRZ-R7 and BRZ-RL orderables). State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerAnalog Devices
Family / packageInstrumentation amplifierSOIC-8
Analog ICsAD8606ARZ

AD8606ARZ is a dual rail-to-rail precision operational amplifier from Analog Devices in an 8-pin SOIC package — for low-voltage precision systems, data acquisition front ends and medical instrumentation. The combination of precision DC specs with rail-to-rail operation is the selection point: it brings precision-grade offset and drift to single-supply low-voltage designs that older precision op-amps cannot serve. Selection advice: the ARZ suffix denotes SOIC-8 on tape and reel — match the full AD8606ARZ code to your footprint and packing needs. Confirm your offset, drift and noise requirements against the datasheet before substituting for a general-purpose op-amp. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerAnalog Devices
Family / packagePrecision operational amplifierSOIC-8
Analog ICsMAX31855KASA+T

MAX31855KASA+T is an Analog Devices (Maxim) cold-junction-compensated K-type thermocouple-to-digital converter in 8-pin SOIC, tape and reel — for industrial temperature sensing: HVAC, appliances and process monitoring. 14-bit conversion with 0.25 °C resolution and integrated cold-junction compensation is the selection point: direct thermocouple-to-digital in one chip, no calibration tables. Selection advice: the K in KASA+T denotes K-type; sibling variants cover J, N, T, S, R and E types — match the letter to your thermocouple, they are not interchangeable; the read-only SPI interface suits simple MCU polling; note it is designed for ungrounded thermocouples. 3.0 V to 3.6 V supply. ADI lists this part as Active. Source: Analog Devices 19-5793 Rev. 5. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerAnalog Devices
Family / packageThermocouple converterSOIC-8
Analog ICsDS3232MZ+TRL

DS3232MZ+TRL is a temperature-compensated real-time clock with integrated memory from Analog Devices (Maxim Integrated) in an 8-pin SOIC package. Temperature compensation is the key advantage: the RTC holds its accuracy across temperature swings without external crystal trimming, which removes a calibration step from production and keeps timekeeping reliable in outdoor and industrial equipment. Selection advice: the + denotes the lead-free/RoHS configuration and TRL tape-and-reel packing — both must match your assembly and compliance requirements, so quote the full DS3232MZ+TRL code rather than the base DS3232. If your design needs battery backup, state your backup-power and date-code requirements in the RFQ; we reconfirm the offered lot, packing and traceability before quotation and reply within 24 hours.

ManufacturerAnalog Devices
Family / packageReal-time clockSOIC-8
Analog ICsINA219AIDCNR

INA219AIDCNR is a Texas Instruments zero-drift bidirectional current and power monitor in SOT-23-8, tape and reel — for power telemetry: servers, telecom and test equipment. Reporting bus voltage, shunt current and computed power over I2C is the selection point: full power telemetry from one chip plus a shunt resistor. Selection advice: the DCNR suffix denotes SOT-23-8 in 3000-piece tape and reel — for the SOIC-8 package, the INA219AIDR is the sibling; the A grade versus the higher-accuracy B grade — pick B only if your error budget needs it; the 0 V to 26 V bus range covers most DC rails. 3 V to 5.5 V supply. TI lists this part as ACTIVE. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerTexas Instruments
Family / packageCurrent and power monitorSOT-23-8
Analog ICsAD9255BCPZ-125

AD9255BCPZ-125 is an Analog Devices 14-bit, 125 MSPS pipelined analog-to-digital converter, single differential channel, parallel LVDS/CMOS output, in 48-lead LFCSP 7 × 7 mm — the IF-sampling ADC for communications receivers, software-defined radio and ultrasound front ends. The 1.8 V analog supply with 371 mW consumption at 125 MSPS is the selection point: 78.3 dBFS SNR and 93 dBc SFDR at 70 MHz input, sampling IF frequencies up to 300 MHz through the 650 MHz analog bandwidth. Selection advice: the -125 suffix is the 125 MSPS speed grade (the same family offers -105 and -80 grades at lower cost) — match the grade to your actual IF bandwidth rather than over-specifying. It is pin-compatible with the 16-bit AD9265, so the layout supports a future resolution upgrade; the Z suffix denotes tray packing (RL7 is the reel variant). Verify the 1.8 V supply rails and LVDS/CMOS output interface against your FPGA/processor. Parameters verified against the ADI AD9255 datasheet and DigiKey listings. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerAnalog Devices
Family / packageHigh-speed ADCLFCSP-48
Analog ICsAD623ARZ-R7

AD623ARZ-R7 is an Analog Devices single-supply instrumentation amplifier, rail-to-rail output, gain 1 to 1000 set by one external resistor, 800 kHz bandwidth at G=1, in SOIC-8 — the sensor front-end amplifier for bridges, thermocouples and low-level transducer signals. The single-resistor gain programming is the selection point: no matched resistor networks to source, with 0.10% gain accuracy at G=1, 200 µV max offset and 550 µA max supply current for battery-powered instruments. Selection advice: it runs on 3 to 12 V single supply or ±2.5 to ±6 V dual supply — but note the input range extends only 150 mV below ground on a single rail, so ground-referenced bipolar sensor signals still need the dual-supply configuration. The R7 suffix is the 7-inch reel (1000 pcs) packing of the SOIC-8. For higher precision or lower noise, compare the AD620/AD8221 family rather than assuming drop-in equivalence. Parameters verified against the ADI AD623 datasheet and Mouser/LCSC listings. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerAnalog Devices
Family / packageInstrumentation amplifierSOIC-8
Analog ICsDAC161S997RGHR

DAC161S997RGHR is a Texas Instruments 16-bit delta-sigma DAC for 4-20 mA current-loop transmission, SPI interface, 2.7 to 3.6 V supply, in WQFN-16 (4 × 4 mm) — the loop-powered transmitter chip for industrial 2-wire and 4-wire field instruments. The 100 µA total supply current is the selection point: in a loop-powered transmitter the DAC must sip from the 4 mA budget, leaving the rest for the sensor and MCU. Selection advice: this is a 4-20 mA loop transmitter, not a general voltage-output DAC — the output stage drives an external bipolar transistor (e.g. 2N3904) per the TI reference design, so verify the loop compliance and error-level programming (3.375 mA / 21.75 mA defaults) against your system FMEA. HART modulator interfacing is built in for smart-transmitter designs. The RGH suffix is the WQFN-16 package, R = tape and reel (4500). Parameters verified against the TI DAC161S997 datasheet (SNAS621) and Mouser listings. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerTexas Instruments
Family / packageDigital-to-analog converterVQFN-16
Analog ICsREF5040AIDR

Texas Instruments REF5040AIDR is a 4.096 V precision voltage reference in SOIC-8, high-grade 0.05% initial accuracy with 3 ppm/°C maximum temperature drift, 12 µVpp noise (0.1–10 Hz), ±10 mA output current and (VOUT + 0.2 V) to 18 V supply range, specified -40 to +125 °C. Its advantage for procurement is ADC-grade performance without a buffer: the ±10 mA drive powers high-resolution ADC reference inputs directly, and 4.096 V maps cleanly to 1 mV-per-LSB on 12-bit converters for simple firmware scaling. Selection advice: the A-grade 0.05% accuracy suits precision data acquisition, medical and test equipment; for cost-sensitive designs the standard 0.1% grade of the same family is cheaper — match the grade to your error budget, and note the TRIM pin allows only ±15 mV adjustment, so do not plan to trim a 4.096 V part down to 4.00 V. Evidence: TI REF50xx datasheet and launch documentation confirm 4.096 V, 0.05% high-grade accuracy, 3 ppm/°C drift and -40 to +125 °C operation. Confirm packing and date-code requirements in your RFQ — we reply within 24 hours.

ManufacturerTexas Instruments
Family / packageVoltage referenceSOIC-8
Analog ICsTDA7294V

TDA7294V is a DMOS audio power amplifier from STMicroelectronics in a Multiwatt-15 package, for high-fidelity audio applications — Hi-Fi amplifiers, active speakers and car audio. Its advantage is the DMOS output stage: high output current with built-in thermal shutdown and short-circuit protection, which keeps a high-power audio design robust without elaborate discrete protection. Selection advice: the V suffix denotes the Multiwatt-15 vertical package — board mounting and heatsinking are integral to this part, so follow the datasheet mechanical and thermal guidance. High-power audio layouts are sensitive to grounding and supply decoupling; confirm your PCB follows the reference design. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerSTMicroelectronics
Family / packageAudio power amplifierMultiwatt-15
Analog ICsADS1115IDGSR

ADS1115IDGSR is a Texas Instruments 16-bit delta-sigma ADC in VSSOP-10 — with an input multiplexer (four single-ended or two differential channels), a programmable gain amplifier and an I2C interface, for precision sensor measurement on space-constrained boards, per TI data sheet SBAS444E. Selection advice: the programmable full-scale ranges are listed in the parameter table — match the sensor span to a range before layout, and keep the DGS package code, as the X2QFN sibling is not footprint-compatible. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerTexas Instruments
Family / packageAnalog-to-digital converterVSSOP-10
Analog ICsADS1220IPWR

ADS1220IPWR is a 24-bit precision analog-to-digital converter from Texas Instruments in a 16-pin TSSOP package, with an SPI interface — for sensor measurement in weigh scales, thermocouple systems and industrial data acquisition. The 24-bit delta-sigma core is the selection point: it resolves microvolt-level sensor signals that lower-resolution converters cannot, with the digital filter handling noise rejection. Selection advice: the IPWR suffix denotes TSSOP-16 on tape and reel — match the full code to your layout. Confirm your required sample rate and input configuration (differential vs single-ended, PGA gain) against the datasheet before committing. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerTexas Instruments
Family / packageAnalog-to-digital converterTSSOP-16
Analog ICsAD8605ARTZ-REEL7

AD8605ARTZ-REEL7 is an Analog Devices precision single-channel CMOS operational amplifier — rail-to-rail input and output, trimmed offset — in SOT-23-5 on a 7-inch tape and reel, per ADI data sheet Rev. O. It is the single-channel member of its family; the dual and quad members are the AD8606 and AD8608. Selection advice: the precision figures are specified under the supply, common-mode and temperature conditions in the parameter table — budget offset and bias current at the real operating point, especially in high-impedance sensor front-ends. Parameters verified against Analog Devices documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerAnalog Devices
Family / packagePrecision operational amplifierSOT-23-5
Analog ICsMAX31865ATP+T

MAX31865ATP+T is an Analog Devices (Maxim) RTD-to-digital converter — a 15-bit delta-sigma ADC optimized for platinum RTDs, handling PT100 to PT1000 (100 Ω to 1 kΩ at 0 °C), compatible with 2-, 3- and 4-wire sensor connections, SPI interface, in 20-pin TQFN-EP, 3 to 3.6 V supply, operating -40 to +125 °C. Integration is the selection point: one chip replaces the precision current source, ratiometric ADC and linearization lookup of a discrete RTD front end, delivering 0.03125 °C nominal resolution and 0.5 °C maximum total accuracy with 21 ms conversion time. Selection advice: the external reference resistor sets the RTD type — 400 Ω for PT100, 4 kΩ for PT1000 — and mismatching it is the classic design error, so confirm the resistor value against your sensor before layout. Inputs survive ±45 V wiring faults and the chip flags RTD/cable open and short conditions, which is why it suits industrial and medical temperature loops. The ATP code is the TQFN-20-EP package (AAP is the SSOP-20 sibling), T denotes tape and reel, and the 3.6 V maximum means a 3.3 V rail — not 5 V. Evidence: ADI/Maxim datasheet and distributor listings confirm 15-bit resolution, PT100-PT1000 range, 2/3/4-wire support and TQFN-20-EP. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerAnalog Devices
Family / packageRTD-to-digital converterTQFN-20
Analog ICsMAX6675ISA+T

MAX6675ISA+T is an Analog Devices (Maxim) cold-junction-compensated K-thermocouple-to-digital converter — 12-bit resolution, 0.25 °C per LSB, measuring 0 to +1024 °C, SPI-compatible read-only interface, in SOIC-8, 3 to 5.5 V supply, operating -20 to +85 °C. One chip replacing the thermocouple amplifier, ADC, cold-junction sensor and linearization table is the selection point: a direct digital temperature reading from a type-K probe with open-thermocouple detection, for industrial ovens, appliances and HVAC. Selection advice: this is type-K only and reads 0 °C to +1024 °C — it cannot measure below 0 °C or other thermocouple types, so for sub-zero or multi-type designs look at the MAX31855 family instead. The -20 to +85 °C figure is the chip ambient range, not the measurement range — the thermocouple itself goes to 1024 °C while the chip must stay within its own limits, a distinction that matters in hot enclosures. Choose MAX6675 for simple high-temperature thermocouple jobs and MAX31865 for precision RTD jobs; the two solve different sensor problems and do not substitute. The ISA code is SOIC-8, T denotes tape and reel. Evidence: ADI/Maxim datasheet and distributor listings confirm K-type, 12-bit, 0.25 °C resolution, 0-1024 °C range and SOIC-8. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerAnalog Devices
Family / packageThermocouple converterSOIC-8
Analog ICsMCP4725A0T-E/CH

MCP4725A0T-E/CH is a Microchip 12-bit single-channel digital-to-analog converter with on-board EEPROM, I2C interface, buffered rail-to-rail output, in SOT-23-6, 2.7 to 5.5 V supply, -40 to +125 °C. The EEPROM is the selection point: the DAC powers up to the stored output code without MCU initialization, which is exactly what set-and-forget control outputs — bias trims, threshold references, drive levels — need to survive power cycles. Performance facts that matter for procurement: 6 µs settling, ±0.2 LSB DNL, 210 µA supply current, and I2C up to 3.4 MHz. Selection advice: the A0 in the code is the external address pin, so multiple MCP4725 variants with different address options can share one I2C bus — confirm the address option against your bus map before ordering, and choose this EEPROM version over plain DACs only when power-on recall is genuinely required, since it costs more than a volatile-output equivalent. Distributor listings mark this ordering code AEC-Q100, useful for automotive-adjacent programs. Evidence: Microchip datasheet and Farnell/element14 listings confirm 12-bit, I2C, EEPROM, SOT-23-6 and 2.7-5.5 V. Match the full MCP4725A0T-E/CH code for the address option and packing. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerMicrochip Technology
Family / packageDigital-to-analog converterSOT-23-6
Analog ICsADS1115IDGST

ADS1115IDGST is a Texas Instruments ADS1115 16-bit delta-sigma analog-to-digital converter — four single-ended or two differential inputs, programmable gain amplifier with full-scale ranges from ±6.144 V down to ±0.256 V, programmable data rates from 8 to 860 SPS, I2C interface with four pin-selectable addresses (one ADDR pin, four states), in 10-pin VSSOP, 250-piece small reel (IDGST); IDGSR is the 2500-piece large reel. -40 to +125 °C. The integrated PGA, low-drift reference and oscillator are the selection point: true precision ADC performance with no external reference or clock, ideal for battery-voltage monitoring, temperature measurement and portable instrumentation. Selection advice: 860 SPS suits slow precision signals — for kilohertz sampling choose an SAR ADC (ADS868x family) instead. The built-in comparator can drive an alert pin for threshold monitoring without MCU polling, and the four I2C addresses let you run up to four converters on one bus. Evidence: TI ADS1115 datasheet SBAS444E (Dec 2024) and package addendum (14-Oct-2025) confirm 16-bit, PGA ranges, 8-860 SPS, four addresses, VSSOP-10, 250 small reel and −40 to +125 °C. Match the full ADS1115IDGST code for packing. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerTexas Instruments
Family / packageADS1115VSSOP-10
Analog ICsADS1115IDYNR

ADS1115IDYNR is a Texas Instruments ADS1115 16-bit delta-sigma analog-to-digital converter in the 10-pin SOT-5X3 (DYN) package, 2.9 x 2.8 mm — four single-ended or two differential inputs, programmable gain from ±6.144 V to ±0.256 V full-scale, 8 to 860 SPS, I2C with four pin-selectable addresses, 3000-piece large reel (IDYNR), -40 to +125 °C. The compact SOT footprint is the selection point: full 16-bit precision with PGA, internal reference and comparator where a VSSOP will not fit; the X2QFN (IRUGR) variant is still smaller for the tightest layouts. Selection advice: same die and performance as the VSSOP (IDGSR) and X2QFN (IRUGR) variants — choose this code for the SOT-5X3 footprint and reel packing. The 150 µA typical operating current and single-shot power-down mode suit battery designs; for 24-bit resolution or excitation sources step up to the ADS1220. TI lists this code as Active. Evidence: TI ADS1115 datasheet SBAS444E and package addendum confirm 16-bit, PGA, I2C, SOT-5X3 (DYN), 3000 large reel and −40 to +125 °C. Match the full ADS1115IDYNR code for package and packing. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerTexas Instruments
Family / packageADS1115SOT-5X3-10
Analog ICsADS1115IRUGR

ADS1115IRUGR is a Texas Instruments ADS1115 16-bit delta-sigma analog-to-digital converter in the 10-pin X2QFN package (2 × 1.5 × 0.4 mm) — four single-ended or two differential inputs, programmable gain from ±6.144 V to ±0.256 V full-scale, 8 to 860 SPS, I2C with four pin-selectable addresses, tape-and-reel packing of 3000 (IRUGR; IRUGT is the small reel), -40 to +125 °C. The 2 × 1.5 mm footprint is the selection point: full 16-bit precision with PGA, internal reference and comparator in one of the smallest ADC packages available, for wearables and dense sensor boards. Selection advice: same die and performance as the VSSOP (IDGSR) and SOT-23 (IDYNR) variants — choose this code for the X2QFN footprint and 3000-reel packing. Leadless QFN needs reflow assembly and good layout practice; for hand-soldering prototypes choose the VSSOP variant. TI lists this code as Active. Evidence: TI ADS1115 datasheet (SBAS444D), TI pack addendum and DigiKey listings confirm 16-bit, PGA, I2C, X2QFN-10 and 3000-reel packing. Match the full ADS1115IRUGR code for package and packing. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ManufacturerTexas Instruments
Family / packageADS1115X2QFN-10
COMPLETE INDEX

All 2627 part numbers

Every published component profile, grouped by category. This index is server-rendered so each part page is reachable by a direct link.

Integrated Circuits (875)
Analog ICs (316)
Memory (108)
Power Management (451)
Interface ICs (190)
Logic (44)
Programmable Logic (35)
Wireless Modules (46)
Sensors (155)
Discrete Semiconductors (292)
Passive Components (103)
Connectors (12)
HAVE MORE THAN ONE LINE?

Import or paste your BOM.

Upload XLSX, CSV, TSV or TXT, or paste up to 500 lines with MPN, quantity and manufacturer.

Open BOM workspace
BEFORE YOU REQUEST A QUOTE

Make the part number useful for procurement

A catalog record helps identify a component. Your exact ordering code and project requirements determine what needs to be checked before a commercial offer.

Use the complete ordering code

A family name may cover different packages, temperature grades or packing suffixes. Include the full MPN and preferred manufacturer so the quoted item can be compared correctly.

Prepare an accurate RFQ

State the conditions behind availability

Public stock and price data can change. Give your quantity, required date, destination and any date-code or traceability requirements; source and commercial terms are reconfirmed in the quotation.

Understand stock freshness

Review alternatives separately

Similar descriptions do not prove pinout, electrical or qualification compatibility. Keep the original MPN in the RFQ and ask for candidate alternatives only when engineering review is possible.

Review alternative-part risks