PSC3M5FDS2ABQ1XQSA1

CY8C4125LQI-483 is an Infineon (Cypress) PSOC 4100 microcontroller in the PSOC 4 family. It combines an Arm Cortex-M0 core with 32 KB Flash, 4 KB SRAM and 34 GPIOs in a 40-pin QFN package. The device includes CapSense and LCD direct-drive functionality. Confirm the complete ordering code, pin assignment, supply requirements and package dimensions against your board design. For project development, this legacy device uses PSOC Creator rather than the ModusToolbox development environment; confirm device support in the tool version used for your project. Include the full part number, quantity, packing format and any date-code or inspection requirements in your RFQ. Availability and delivery terms are confirmed with the quotation.

PSC3M5FDS2AFQ1 is an Infineon Technologies PSOC Control C3 Main-line 32-bit microcontroller in E-LQFP-80, for motor control and digital power. It combines an Arm Cortex-M33 core with 256 KB Flash, a 12-bit 12-Msps SAR ADC with up to 18 channels, a CORDIC accelerator, a Hall/Encoder interface, and 6 SCB serial blocks, so field-oriented motor control and fast analog feedback fit on one chip. The benefit is control-loop performance: the fast ADC and CORDIC offload the math that otherwise eats CPU cycles, leaving headroom for dual-motor or power-stage control. Selection advice: this is the Main-line C3M5 with the fast 12-Msps ADC; for cost-optimized designs compare the Entry-line C3 parts with the slower ADC, and confirm the 80-pin E-LQFP footprint against your layout, since the C3 family also ships in 48-pin and 64-pin packages. Listed on DigiKey. Parameters verified against Infineon Technologies documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

PSC3M5FDS2LGQ1XQSA1 is a PSOC Control C3 Main Line microcontroller from Infineon Technologies for motor drive and power conversion in a compact 48-pin VQFN package, built around a 180 MHz Arm Cortex-M33 core with DSP and FPU, with 256 KB Flash, 64 KB SRAM, a 12-bit 12 Msps SAR ADC with 12 channels, CORDIC math coprocessor, MOTIF Hall and encoder interface, 16-channel 16-bit plus 4-channel 32-bit TCPWM, 4-channel high-resolution PWM with under 100 ps resolution, two CAN FD channels, and four serial communication blocks (UART, SPI, or I2C each). The Main Line balance is the selection point: real-time motor control peripherals, high-resolution PWM, and dual-core-ready performance at a lower cost than the Performance Line, with PSA L2 security, Class B and SIL 2 safety support, a 1.71 V to 3.6 V supply range, and a -40 °C to +105 °C operating range for industrial drives, HVAC, servo drives, power tools, and robotics. The business gain is one qualified MCU platform for single- or dual-motor designs: fewer external control parts, faster control-loop math through CORDIC and MOTIF, and ModusToolbox Motor Suite support that shortens firmware development. Evidence: Infineon datasheet 002-36032 Rev. *F lists PSC3M5FDS2LGQ1 with 256 KB Flash, 12 Msps 12-channel ADC, CORDIC, Hall and encoder support, four serial blocks, and a VQFN-48 package. Selection advice: choose this 48-pin VQFN form over the 64-pin form when 12 analog channels and four serial blocks cover the design and board space matters, since the packages are not pin-compatible; choose the M5 motor variant over the P5 power variant when the design drives motors; the FDS2 code denotes 256 KB Flash with dual-core and PSA L2 security, and the Q code denotes the extended -40 °C to +105 °C range; quote the full PSC3M5FDS2LGQ1XQSA1 code including the XQSA1 ordering suffix. Featured on DigiKey Product Highlights (2026-10-08). Parameters verified against Infineon Technologies documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

PSC3M5FDS2LHQ1XQSA1 is a PSOC Control C3 Main Line microcontroller from Infineon Technologies for dual-motor drive plus power factor correction, built around a 180 MHz Arm Cortex-M33 core with DSP and FPU, with 256 KB Flash, 64 KB SRAM, a 12-bit 12 Msps SAR ADC with 18 channels, CORDIC math coprocessor, MOTIF Hall and encoder interface, 16-channel 16-bit plus 4-channel 32-bit TCPWM, 4-channel high-resolution PWM with under 100 ps resolution, two CAN FD channels, and six serial communication blocks (UART, SPI, or I2C each) in a 64-pin VQFN package. The Main Line balance is the selection point: real-time motor control peripherals, high-resolution PWM, and dual-core-ready performance at a lower cost than the Performance Line, with PSA L2 security, Class B and SIL 2 safety support, a 1.71 V to 3.6 V supply range, and a -40 °C to +105 °C operating range for industrial drives, HVAC compressors, servo drives, power tools, and robotics. The business gain is one qualified MCU platform for dual-motor plus PFC designs: fewer external control parts, faster control-loop math through CORDIC and MOTIF, and ModusToolbox Motor Suite support that shortens firmware development. Evidence: Infineon datasheet 002-36032 Rev. *F lists PSC3M5FDS2LHQ1 with 256 KB Flash, 12 Msps 18-channel ADC, CORDIC, Hall and encoder support, six serial blocks, and a VQFN-64 package. Selection advice: choose the M5 motor variant over the P5 power variant when the design drives motors; choose this 64-pin form over the 48-pin forms when the design needs the full 18 analog channels and six serial blocks, since the packages are not pin-compatible; the FDS2 code denotes 256 KB Flash with dual-core and PSA L2 security, and the Q code denotes the extended -40 °C to +105 °C range; quote the full PSC3M5FDS2LHQ1XQSA1 code including the XQSA1 ordering suffix. Featured on DigiKey Product Highlights (2026-10-08). Parameters verified against Infineon Technologies documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

PSC3P8GFS3PAHQ1 is a PSOC Control C3 Performance Line microcontroller from Infineon Technologies for high-frequency digital power conversion, built around a 180 MHz Arm Cortex-M33 main core plus a programmable power control accelerator (PPCA) with two 200 MHz Cortex-M33 cores, with 512 KB Flash, 128 KB SRAM, four 12-bit 25 Msps SAR ADCs, 26-channel TCPWM including 12-channel high-resolution PWM with sub-100 ps resolution, two CAN FD channels, and CryptoLite security in a 100-pin E-LQFP package. The PPCA is the selection point: it closes control loops inside dedicated hardware instead of loading the main core, so designs hold tight regulation at switching frequencies up to 2 MHz with wide-bandgap GaN or SiC switches, which is how AI server PSUs, solar inverters, EV chargers, and high-density SMPS reach higher efficiency and power density without a larger controller. The business gain is a smaller, cooler power stage: fewer external control parts, faster transient response, and one qualified MCU platform across power tiers. Evidence: the Infineon PSOC Control C3 Performance Line product brief lists this ordering code with 512 KB Flash, 128 KB SRAM, 40 analog inputs, 60 GPIO, PSA L3 security, and a -40 °C to +115 °C operating range, and the Performance Line family datasheet defines its PPCA, ADC, and PWM configuration. Selection advice: choose the P8 power-conversion variant over the M8 motor variant when the design is a converter rather than a drive; choose this 100-pin E-LQFP form over the 64-pin VQFN form when the design needs the full 60 GPIO and 40 analog inputs, since the two packages are not pin-compatible; match the full PSC3P8GFS3PAHQ1 code, because the C3 family spans Entry, Main, and Performance lines that are not drop-in interchangeable. Featured on DigiKey Product Highlights (2026-10-12). Parameters verified against Infineon Technologies documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

PSC3P8GFS3PLHQ1 is a PSOC Control C3 Performance Line microcontroller from Infineon Technologies for high-frequency digital power conversion in a compact 64-pin VQFN package, built around a 180 MHz Arm Cortex-M33 main core plus a programmable power control accelerator (PPCA) with two 200 MHz Cortex-M33 cores, with 512 KB Flash, 128 KB SRAM, four 12-bit 25 Msps SAR ADCs, 26-channel TCPWM including 12-channel high-resolution PWM with sub-100 ps resolution, two CAN FD channels, and CryptoLite security. The PPCA is the selection point: it closes control loops inside dedicated hardware instead of loading the main core, so designs hold tight regulation at switching frequencies up to 2 MHz with wide-bandgap GaN or SiC switches, which is how AI server PSUs, solar inverters, EV chargers, and high-density SMPS reach higher efficiency and power density without a larger controller. The business gain is a smaller, cooler power stage: fewer external control parts, faster transient response, and one qualified MCU platform across power tiers. Evidence: the Infineon PSOC Control C3 Performance Line product brief lists this ordering code with 512 KB Flash, 128 KB SRAM, 29 analog inputs, 34 GPIO, PSA L3 security, and a -40 °C to +115 °C operating range, and the Performance Line family datasheet defines its PPCA, ADC, and PWM configuration. Selection advice: choose this 64-pin VQFN form over the 100-pin E-LQFP form when board space matters and 34 GPIO plus 29 analog inputs cover the design, since the two packages are not pin-compatible; choose the P8 power-conversion variant over the M8 motor variant when the design is a converter rather than a drive; match the full PSC3P8GFS3PLHQ1 code, because the C3 family spans Entry, Main, and Performance lines that are not drop-in interchangeable. Featured on DigiKey Product Highlights (2026-10-12). Parameters verified against Infineon Technologies documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

XMC5100-F100K576AA is a dual-core industrial microcontroller from Infineon Technologies, combining an 80 MHz Arm Cortex-M4F main core with an 80 MHz Arm Cortex-M0+ core dedicated to cryptography, with 576 KB code flash, 64 KB work flash and 64 KB SRAM in a 100-pin LQFP package. The dual-core split is the practical benefit: real-time control runs on the M4F while security and crypto tasks stay on the M0+, and up to 4 CAN FD channels, 6 configurable serial communication blocks (I2C, SPI or UART each), 32 ADC channels and timer/PWM blocks cover motor control, HVAC and lighting designs without external glue logic. For procurement, the payoff is family scalability: the XMC5000 series shares the ModusToolbox toolchain and a migration path to XMC7000, so firmware and tooling investment carries across cost, mid-range and high-end variants, and the 2.7 V to 5.5 V supply range plus -40 °C to +125 °C operation suit both 3.3 V and 5 V industrial systems. Evidence: Infineon datasheet 002-41593 Rev. *A defines this ordering code and its memory and peripheral configuration. Selection and procurement advice: within the family, the XMC5100 is the cost-sensitive pick; choose the XMC5200 for 160 MHz operation with larger memory and more CAN FD channels, or the XMC5300 for gateway-class designs; the F100 code denotes the 100-pin LQFP package, so match the full XMC5100-F100K576AA code to your layout, since the same series also ships in a 64-pin package. Featured in Mouser new-product coverage dated October 13, 2026. Parameters verified against Infineon Technologies documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

XMC5200-F100K1088AA is a dual-core industrial microcontroller from Infineon Technologies, pairing a 160 MHz Arm Cortex-M4F main core with a 100 MHz Arm Cortex-M0+ core dedicated to cryptography, with 1088 KB code flash, 96 KB work flash and 128 KB SRAM in a 100-pin LQFP package. The step up from the entry XMC5100 is real headroom: twice the core clock, roughly twice the code flash and twice the SRAM, plus up to 6 CAN FD channels, 8 configurable serial communication blocks (I2C, SPI or UART each), 39 ADC channels and up to 75 16-bit timer blocks for I/O-rich motor control, HVAC and home-appliance designs. The business value is a single mid-range platform: the 2.7 V to 5.5 V supply range, -40 °C to +125 °C operation, SECDED ECC on safety-critical memories, Class-B and SIL-2 safety support and ModusToolbox tooling let one qualified design serve multiple product tiers, while read-while-write flash and dual-bank operation support firmware-over-the-air updates. Evidence: Infineon datasheet 002-41596 Rev. *A defines this ordering code and its memory and peripheral configuration. Selection and procurement advice: pick the XMC5200 when the XMC5100 runs out of clock, memory or CAN FD channels but the XMC5300 2 MB flash and 8 CAN FD channels are more than the application needs; the F100 code denotes the 100-pin LQFP package, so match the full XMC5200-F100K1088AA code to your layout, since this series also ships in 64-pin and 144-pin packages. Featured in Mouser new-product coverage dated October 13, 2026. Parameters verified against Infineon Technologies documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

XMC5300-F100K2112AA is the top dual-core industrial microcontroller of the Infineon Technologies XMC5000 family, combining a 160 MHz Arm Cortex-M4F main core with a 100 MHz Arm Cortex-M0+ core dedicated to cryptography, with 2112 KB code flash, 128 KB work flash and 256 KB SRAM in a 100-pin LQFP package. It is built for the most demanding node in the system: up to 8 CAN FD channels plus CXPI connectivity, 8 configurable serial communication blocks (I2C, SPI or UART each), 39 ADC channels and up to 75 16-bit timer blocks let one device act as a gateway or system controller that aggregates multiple buses and control loops. The business gain is consolidation: a single high-memory MCU replaces multi-chip gateway assemblies, while the 2.7 V to 5.5 V supply range, -40 °C to +125 °C operation, SECDED ECC on safety-critical memories, Class-B and SIL-2 safety support and ModusToolbox tooling keep qualification effort inside one familiar family, and read-while-write flash with dual-bank operation supports firmware-over-the-air updates. Evidence: Infineon datasheet 002-41594 Rev. *A defines this ordering code and its memory and peripheral configuration. Selection and procurement advice: choose the XMC5300 for gateway-class or multi-bus designs; for simpler control tasks the XMC5100 or XMC5200 deliver the same toolchain at lower memory cost; the F100 code denotes the 100-pin LQFP package, so match the full XMC5300-F100K2112AA code to your layout, since this series also ships in a 144-pin package with more ADC channels and GPIO. Featured in Mouser new-product coverage dated October 13, 2026. Parameters verified against Infineon Technologies documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

AM2434BSDFHIALVR is a Texas Instruments Sitara AM243x high-performance MCU: up to four 800 MHz Arm Cortex-R5F cores, a 400 MHz Cortex-M4F, and dual gigabit PRU-ICSSG industrial-communication subsystems in a 441-ball FCBGA (17.2 x 17.2 mm). It is TI's consolidation play for factory automation — the R5F cluster delivers deterministic servo-loop control while the PRU-ICSSG runs full protocol stacks for EtherCAT target, PROFINET device and EtherNet/IP adapter on the same silicon, replacing architectures that needed an MCU plus an external industrial-Ethernet ASIC or FPGA. Heat evidence: the AM243x is TI's mainstream platform for servo drives and remote I/O modules, and its datasheet remains under active revision (Rev. J, 2026), signaling continued TI investment in the family. Selection advice: the full orderable encodes silicon revision, feature configuration, temperature grade and the ALV 441-ball FCBGA package on tape and reel — match it character-for-character; the ALX 293-ball FCCSP is a smaller, footprint-incompatible alternative, and R5F count plus PRU features vary across AM2431/32/34. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.