FAN3224TMX

FAN3225TMX is an onsemi dual-channel low-side MOSFET gate driver — SOIC-8, 5 A source/sink, VCC up to 18 V, 12/9 ns rise/fall, non-isolated, 2500-piece reel. The 5 A drive in SOIC-8 is the selection point: fast switching of large MOSFETs/IGBTs from logic — the current rating that separates real gate drivers from logic buffers. Selection advice: lifecycle warning — onsemi flags the FAN3225TMX as Lifetime (last-time-buy direction; PCN PD27281XH lists it for discontinuance) and recommends the WDFN-8 FAN3225TMPX as the replacement; for new designs specify the TMPX, and for existing production confirm the exact FAN3225TMX code — the TMX (SOIC-8) and TMPX (WDFN-8) are different packages. Verify the non-isolated drive against your topology — high-side drive needs an isolated or bootstrap driver instead. Evidence: onsemi data confirms Lifetime flag, PD27281XH, SOIC-8, 5 A, and the FAN3225TMPX replacement. Match the full FAN3225TMX code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

FAN3227TMX is an onsemi dual-channel low-side MOSFET gate driver — SOIC-8, 3 A source/sink, 4.5–18 V supply, 12/9 ns rise/fall, non-inverting, non-isolated, −40 to +125 °C, 2500-piece reel. The 3 A drive in SOIC-8 is the selection point: fast switching of power MOSFETs from logic — dual independent channels for two-switch topologies. Selection advice: onsemi lists the FAN3227TMX as Active (DigiKey confirms). The TMX suffix denotes SOIC-8 on tape and reel — match it to your assembly process. Note the non-isolated low-side-only drive — high-side switching needs a bootstrap or isolated driver instead. For 5 A drive in the same footprint consider the FAN3225TMX (Lifetime — check availability). Evidence: DigiKey confirms Active, 3 A, SOIC-8, 4.5–18 V. Match the full FAN3227TMX code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

MIC4427ZM is a Microchip dual 1.5 A low-side MOSFET gate driver — 8-pin SOIC, 4.5–18 V supply, drives 1000 pF in 18 ns, 17 ns propagation delay, tube packing. The 1.5 A dual drive is the selection point: two independent low-side channels for dual-switch topologies — synchronous buck and push-pull stages from one chip. Selection advice: Microchip lists the MIC4427ZM as In Production. The ZM suffix pins the SOIC-8 package on tube — match it to your assembly process; reel codes differ. Note the low-side-only, non-isolated drive — high-side switching needs a bootstrap or isolated driver instead. Evidence: Microchip data confirms In Production, dual 1.5 A, SOIC-8, 4.5–18 V, tube. Match the full MIC4427ZM code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

MIC4428ZM is a Microchip dual 1.5 A low-side MOSFET gate driver — 8-pin SOIC with inverting plus non-inverting outputs, 4.5–18 V supply, drives 1000 pF in 18 ns, 17 ns propagation delay, tube packing. The inverting/non-inverting pair is the selection point: one channel of each polarity — drive a high-side/low-side pair or complementary switches without an external inverter. Selection advice: Microchip lists the MIC4428ZM as In Production. The ZM suffix pins the SOIC-8 package on tube — match it to your assembly process. For two non-inverting channels use the MIC4427 instead; the 4428 exists specifically for the mixed-polarity case. Evidence: Microchip data confirms In Production, dual 1.5 A, mixed outputs, SOIC-8, tube. Match the full MIC4428ZM code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

UCC27323DR is a Texas Instruments 16 V VDD, 5 A/5 A dual-channel low-side gate driver in SOIC-8, tape and reel — for driving power MOSFETs and IGBTs from logic: SMPS, motor drives and inverters. Dual 5 A drive with dual inverting inputs is the selection point: active-low logic drive in a standard package. Selection advice: the DR suffix denotes SOIC-8 in tape and reel for production — the dual-inverting input versus the dual-noninverting UCC27324DR; verify your logic polarity against the datasheet before substituting. TI lists this part as ACTIVE. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

UCC27324DR is a Texas Instruments 16 V VDD, 5 A/5 A dual-channel low-side gate driver in SOIC-8, tape and reel — for driving power MOSFETs and IGBTs from logic: SMPS, motor drives and inverters. Dual 5 A drive with TTL/CMOS-compatible dual noninverting inputs is the selection point: logic-friendly dual drive in a standard package. Selection advice: the DR suffix denotes SOIC-8 in tape and reel for production — for the 20 V VDD class with -5 V input capability, the UCC27524DR is the sibling; the G4 suffix (UCC27324DRG4) is TI's green variant, functionally equivalent. TI lists this part as ACTIVE. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

UCC27324DRG4 is a Texas Instruments dual-channel low-side gate driver in SOIC-8, tape and reel — for driving power MOSFETs and IGBTs from logic: SMPS, motor drives and inverters. The G4 green variant of the UCC27324DR is the selection point: the same dual 5 A drive, qualified for green/RoHS programs. Selection advice: TI marks the DRG4 as equivalent to UCC27324DR/DR.A — interchangeable on the same footprint; for the 20 V VDD class with -5 V input capability, the UCC27524DR is the sibling. Dual noninverting TTL/CMOS-compatible inputs. TI lists this part as ACTIVE. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

UCC27325DR is a Texas Instruments 16 V VDD, 5 A/5 A dual-channel low-side gate driver in SOIC-8, tape and reel — for driving power MOSFETs and IGBTs from logic: SMPS, motor drives and inverters. Dual 5 A drive with inverting/noninverting input mix is the selection point: complementary drive polarity in one package. Selection advice: the DR suffix denotes SOIC-8 in tape and reel for production — the mixed input polarity versus the dual-noninverting UCC27324DR; verify your logic polarity against the datasheet before substituting. TI lists this part as ACTIVE. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

UCC27423DR is a Texas Instruments dual-channel low-side gate driver in SOIC-8, tape and reel — for driving power MOSFETs and IGBTs from logic: SMPS, motor drives and inverters. Dual 5 A drive with dual inverting inputs and 4 V to 15 V supply is the selection point: active-low logic drive across a wide supply range. Selection advice: the DR suffix denotes SOIC-8 in tape and reel for production — the dual-inverting input; for the 16 V VDD class with dual-noninverting inputs, the UCC27324DR is the sibling. TI lists this part as ACTIVE. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

UCC27424DR is a Texas Instruments dual-channel low-side gate driver in SOIC-8, tape and reel — for driving power MOSFETs and IGBTs from logic: SMPS, motor drives and inverters. Dual 5 A drive with dual noninverting inputs plus enable is the selection point: shutdown control on both channels in a standard package. Selection advice: the DR suffix denotes SOIC-8 in tape and reel for production — the enable pin versus the UCC27324DR; for automotive BOMs, the Q1 variant (UCC27424QDRQ1) is required. 4 V to 15 V supply. TI lists this part as ACTIVE. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

onsemi revised its Synaptics acquisition to $123 a share in cash ($5.7B) after a competing bid. What the new terms reveal about intent — and a five-point buyer checklist for the eight months to close.

Microchip and Navitas showed an 800V-to-6V GaN reference design for AI racks, targeting 96% efficiency. What the design actually is, what it signals for component selection, and a five-point buyer checklist.