100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsPower ManagementLM2596S-12/NOPB
PACKAGE REFERENCETO-263-5Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

LM2596S-12/NOPB

Texas Instruments

LM2596S-12/NOPB is a Texas Instruments LM2596 SIMPLE SWITCHER fixed 12 V step-down (buck) regulator — 3 A, 4.5 to 40 V input, 150 kHz fixed-frequency internal oscillator, in the 5-lead TO-263 surface-mount package (S), tube packing, NOPB lead-free, operating -40 to +125 °C. The fixed 12 V version is the selection point: the classic 24 V industrial bus down to a 12 V rail with no feedback divider, so fewer external parts and no resistor-tolerance error — the datasheet circuit needs only four external components. Selection advice: choose the fixed 12 V code when the rail is known (5 V and 3.3 V codes exist in the same family) and the adjustable LM2596S-ADJ only when the voltage must be trimmable. The 150 kHz frequency keeps the design simple and cheap but demands a larger inductor than modern megahertz switchers, and as a non-synchronous part it cannot match modern synchronous bucks on light-load efficiency — check that trade before committing. Thermal shutdown, current limiting and TTL shutdown are built in. The S (TO-263) is the SMD package; for through-hole heatsinking look at the T (TO-220) codes. Evidence: TI/National LM2596 datasheet and distributor listings confirm 12 V fixed, 3 A, 4.5-40 V, 150 kHz and TO-263. Match the full LM2596S-12/NOPB code for voltage, package and lead-free packing.

Power ManagementStep-down regulatorTO-263-5
MPN
LM2596S-12/NOPB
Manufacturer
Texas Instruments
Family
Step-down regulator
Package
TO-263-5
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
Lifecycle
Active
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Topology
Step-down buck regulator
Input voltage
4.5 V to 40 V
Maximum output current
3 A
Switching frequency
150 kHz
Version
Fixed 12 V output
Package
TO-263-5
Source: Texas Instruments product data · Reviewed 2026-09-29
ORDER-CODE COMPARISON

Same series, different order codes.

LM2596 is available in the following manufacturer order codes. They share the same Step-down regulator design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
LM2596S-12/NOPBTO-263-5TubeFixed 12 V output
LM2596S-3.3/NOPBTO-263-5TubeFixed 3.3 V output
LM2596S-5.0/NOPBTO-263-5TUBEOutput option is 5.0 V, while LM2596S-ADJ/NOPB is Adjustable; output circuit requires re-verification; same TO-263-5 package as LM2596S-ADJ/NOPB; this difference alone does not require PCB pad changes.
LM2596S-ADJ/NOPBTO-263-5TubeAdjustable output
LM2596SX-12/NOPBTO-263-5LARGE T&ROutput option is 12 V, while LM2596S-ADJ/NOPB is Adjustable; output circuit requires re-verification; same TO-263-5 package as LM2596S-ADJ/NOPB; this difference alone does not require PCB pad changes; factory packing is LARGE T&R, 500 per pack; LM2596S-ADJ/NOPB is TUBE, 45 per pack.
LM2596SX-3.3/NOPBTO-263-5LARGE T&ROutput option is 3.3 V, while LM2596S-ADJ/NOPB is Adjustable; output circuit requires re-verification; same TO-263-5 package as LM2596S-ADJ/NOPB; this difference alone does not require PCB pad changes; factory packing is LARGE T&R, 500 per pack; LM2596S-ADJ/NOPB is TUBE, 45 per pack.
LM2596SX-5.0/NOPBTO-263-5Large tape and reelFixed 5 V output, reel
LM2596SX-ADJ/NOPBTO-263-5LARGE T&RSame TO-263-5 package as LM2596S-ADJ/NOPB; this difference alone does not require PCB pad changes; factory packing is LARGE T&R, 500 per pack; LM2596S-ADJ/NOPB is TUBE, 45 per pack.
LM2596T-12/NOPBTO-220-5TUBEOutput option is 12 V, while LM2596S-ADJ/NOPB is Adjustable; output circuit requires re-verification; package/pins: TO-220 (NDH), 5 pins; LM2596S-ADJ/NOPB is TO-263 (KTT), 5 pins; do not assume direct replacement
LM2596T-3.3/NOPBTO-220-5TUBEOutput option is 3.3 V, while LM2596S-ADJ/NOPB is Adjustable; output circuit requires re-verification; package/pins: TO-220 (NDH), 5 pins; LM2596S-ADJ/NOPB is TO-263 (KTT), 5 pins; do not assume direct replacement
LM2596T-5.0/NOPBTO-220-5TUBEOutput option is 5.0 V, while LM2596S-ADJ/NOPB is Adjustable; output circuit requires re-verification; package/pins: TO-220 (NDH), 5 pins; LM2596S-ADJ/NOPB is TO-263 (KTT), 5 pins; do not assume direct replacement
LM2596T-ADJ/NOPBTO-220-5TUBEPackage/pins: TO-220 (NDH), 5 pins; LM2596S-ADJ/NOPB is TO-263 (KTT), 5 pins; do not assume direct replacement — verify PCB pads, thermal and pinoutt.
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Power Management records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

MARKET INSIGHTS

Procurement coverage for LM2596S-12/NOPB

In-depth buyer guides on the market forces affecting this part category — allocation, mergers and technology shifts.

COMMON QUESTIONS

LM2596S-12/NOPB FAQ

What is the difference between LM2596S-12/NOPB and LM2596S-3.3/NOPB, LM2596S-5.0/NOPB, LM2596S-ADJ/NOPB?

These are order-code variants of the same Texas Instruments series. They share the core design; the ordering code selects the exact configuration — LM2596S-3.3/NOPB: Fixed 3.3 V output; LM2596S-5.0/NOPB: Output option is 5.0 V, while LM2596S-ADJ/NOPB is Adjustable; output circuit requires re-verification; same TO-263-5 package as LM2596S-ADJ/NOPB; this difference alone does not require PCB pad changes.; LM2596S-ADJ/NOPB: Adjustable output. LM2596S-12/NOPB itself is the TO-263-5 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What are the key specifications of LM2596S-12/NOPB?

From the verified technical profile: Topology: Step-down buck regulator; Input voltage: 4.5 V to 40 V; Maximum output current: 3 A. These are the catalog-recorded values for LM2596S-12/NOPB — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.