100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsInterface ICsISO1050DUBR
PACKAGE REFERENCESOP-8Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

ISO1050DUBR

Texas Instruments

ISO1050DUBR is a Texas Instruments galvanically isolated CAN transceiver in SOP-8, tape and reel — for CAN nodes in harsh environments: motor drives, solar inverters and industrial controllers where ground noise must not reach the MCU. 2500 VRMS isolation with 1 Mbps CAN and −27 V to 40 V bus-fault protection is the selection point: isolation and the transceiver in one 8-pin package, no optocouplers. Selection advice: the DUB suffix denotes the SOP-8 package with 2500 VRMS — for 5000 VRMS, the DW-packaged ISO1050DW is the sibling. Pair it with a CAN controller such as the MCP2515 on this site — the ISO1050 is the isolated bus driver, not the protocol engine. 3 V to 5.5 V supply supports 3.3 V and 5 V logic; −55 °C to +105 °C. TI lists the ISO1050 as Active. Source: Texas Instruments SLLS983 Rev. L.

Interface ICsIsolated CAN transceiverSOP-8
MPN
ISO1050DUBR
Manufacturer
Texas Instruments
Family
Isolated CAN transceiver
Package
SOP-8
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
Lifecycle
Active
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Interface
Galvanically isolated CAN transceiver
Maximum signaling rate
1 Mbps
Isolation rating
2500 VRMS
Bus-fault protection
-27 V to 40 V
Temperature range
-55°C to 105°C
Package
SOP-8 tape and reel
Source: Texas Instruments ISO1050 data sheet SLLS983 Rev. L (ti.com) · Reviewed 2026-09-21
ORDER-CODE COMPARISON

Same series, different order codes.

ISO1050 is available in the following manufacturer order codes. They share the same Isolated CAN transceiver design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
ISO1050DUBRSOP-8——
ISO1050DWRSOIC-16LARGE T&RPackage/pins: SOIC (DW), 16 pins; ISO1050DUBR is SOP (DUB), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 2,000 per pack; ISO1050DUBR is LARGE T&R, 350 per pack.
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Interface ICs records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

MARKET INSIGHTS

Procurement coverage for ISO1050DUBR

In-depth buyer guides on the market forces affecting this part category — allocation, mergers and technology shifts.

COMMON QUESTIONS

ISO1050DUBR FAQ

What is the difference between ISO1050DUBR and ISO1050DWR?

These are order-code variants of the same Texas Instruments series. They share the core design; the ordering code selects the exact configuration — ISO1050DWR: Package/pins: SOIC (DW), 16 pins; ISO1050DUBR is SOP (DUB), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 2,000 per pack; ISO1050DUBR is LARGE T&R, 350 per pack.. ISO1050DUBR itself is the SOP-8 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What are the key specifications of ISO1050DUBR?

From the verified technical profile: Interface: Galvanically isolated CAN transceiver; Maximum signaling rate: 1 Mbps; Isolation rating: 2500 VRMS. These are the catalog-recorded values for ISO1050DUBR — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.