SS54

SS34-E3/57T is a Vishay 40 V / 3 A Schottky barrier rectifier in SMC (DO-214AB), tape and reel — for low-voltage power conversion: DC-DC output rectification, freewheeling and reverse-polarity protection. 0.5 V forward voltage at 3 A is the selection point: Schottky drop cuts conduction loss roughly in half versus a standard PN rectifier at the same current. Selection advice: the E3/57T suffix denotes tape and reel packaging — quote the full suffix to get reel rather than bulk; the onsemi SS34 on this site is the same 40 V / 3 A SMC footprint from a second manufacturer, giving a cross-source option for supply resilience. 100 A surge capability, −55 °C to +125 °C. Vishay lists this part as Active through distribution. Parameters verified against Vishay documentation and distributor listings. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

SS36 is an onsemi Schottky barrier rectifier — VRRM 60 V, 3 A average rectified current, forward drop maximum 0.75 V, SMC (DO-214AB) surface-mount package. The 3 A rating in SMC is the selection point: mid-current SMD rectification for power supplies and reverse-polarity protection without the bulk of an axial diode. Selection advice: onsemi lists the SS36 as Active. The SS3x family shares the SMC footprint across voltage grades — SS34 (40 V), SS36 (60 V), SS310 (100 V): pick the grade that covers your rail with margin, since one layout serves the whole range. At 3 A the forward loss exceeds 2 W — provide adequate copper pour under the SMC pads. Evidence: distributor data confirms onsemi SS36 Active, 3 A, 60 V, SMC. Match the full SS36 code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

1N5817 is a JEDEC-registered Schottky rectifier diode — 20 V reverse voltage, 1 A average rectified current, forward drop maximum 0.45 V at 1 A, DO-41 axial package, −65 °C to +125 °C. The low forward drop is the selection point: roughly half the loss of a PN diode at 1 A — the default Schottky for reverse-polarity protection and low-voltage rectification. Selection advice: lifecycle note — onsemi lists its axial 1N5817 variants as Obsolete, but the 1N5817 is a multi-source JEDEC number; for ongoing production specify a current-production 1N5817 from an active manufacturer. Voltage-grade siblings 1N5818 (30 V) and 1N5819 (40 V) share the package — pick the grade that covers your rail with margin, since Schottky leakage rises with voltage and temperature. Evidence: onsemi/Vishay datasheets confirm 20 V, 1 A, 0.45 V VF, DO-41. Match the full order code on your BOM. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

BAT54 is a Schottky barrier diode in SOT-23 — 30 V continuous reverse voltage, 200 mA continuous forward current, 240 mV forward voltage at 0.1 mA, 5 ns reverse recovery, 600 mA surge, guard ring for transient and ESD protection, -65 to +150 °C. The Schottky construction is the selection point: ~240 mV forward drop instead of ~700 mV silicon drop for low-loss blocking and clamping, plus 5 ns recovery for high-speed switching. Selection advice: BAT54 is the single-diode SOT-23 version (pin 2 is no-connect) — BAT54A, BAT54C and BAT54S are dual-diode variants with different pinning, so match the full BAT54 code for diode configuration. Evidence: NXP/Diodes Incorporated BAT54 datasheets and distributor listings confirm Schottky, 30 V, 200 mA, 240 mV Vf and SOT-23. Match the full BAT54 code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

BAT54S,215 is a Nexperia dual series Schottky diode in SOT-23, tape and reel — for ultra-high-speed switching, clamping and reverse-polarity protection in tight layouts. Two 30 V / 200 mA Schottky diodes with 5 ns reverse recovery in one SOT-23 is the selection point: series connection suits bidirectional clamping and bridge legs without a second package. Selection advice: the S denotes series — the BAT54 family also ships as BAT54 (single), BAT54A (common anode) and BAT54C (common cathode); confirm the pinout letter against your schematic before substituting, they are not interchangeable. The ,215 suffix denotes tape and reel. AEC-Q101 qualified. −65 °C to +150 °C. Nexperia lists this part as Active through distribution. Parameters verified against the Nexperia datasheet and distributor listings. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

SB560 is an onsemi 5 A Schottky barrier rectifier — VRRM 60 V, forward drop maximum 0.67 V, DO-201AD axial package. The 5 A rating in an axial package is the selection point: through-hole high-current rectification and reverse-polarity protection where SMD is not an option. Selection advice: lifecycle note — onsemi lists the SB560 as Obsolete; for ongoing production specify a current-production SB560 from an active manufacturer or the SMD equivalent. At 5 A the 0.67 V drop dissipates over 3 W — provide adequate copper or heatsinking, and verify the DO-201AD footprint against the DO-41 (smaller) and DO-27 variants, which are not interchangeable. Evidence: distributor data confirms onsemi SB560 Obsolete, 5 A, 60 V, DO-201AD. Match the full SB560 code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

SS210 is a Taiwan Semiconductor planar Schottky rectifier — VRRM 100 V, 2 A average forward current, SMB (DO-214AA) surface-mount package, 150 °C max junction. The 100 V top grade in SMB is the selection point: the highest-voltage 2 A Schottky in the compact SMB footprint for 48 V telecom and industrial rails. Selection advice: Taiwan Semiconductor lists the SS210 as Active. The SS2x family shares the SMB footprint across voltage grades — SS24 (40 V) through SS210 (100 V): one layout serves the whole range, so pick the grade that covers your rail with margin. At 100 V Schottky reverse leakage is significant — verify the leakage current against your standby and thermal budget. Evidence: Taiwan Semiconductor data confirms Active, 2 A, 100 V, SMB, 150 °C junction. Match the full SS210 code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

SS26 is a Taiwan Semiconductor planar Schottky barrier diode — VRRM 60 V, 2 A average forward current, SMB (DO-214AA) surface-mount package, 150 °C max junction. The 2 A rating in SMB is the selection point: compact SMD rectification for 24–48 V rails where a 40 V diode leaves too little margin. Selection advice: Taiwan Semiconductor lists the SS26 as Active. The SS2x family shares the SMB footprint across voltage grades — SS24 (40 V), SS26 (60 V), SS28 (80 V), SS210 (100 V): one layout serves the whole range, so pick the grade that covers your rail with margin. At 2 A provide adequate copper under the SMB pads. Evidence: Taiwan Semiconductor data confirms Active, 2 A, 60 V, SMB, 150 °C junction. Match the full SS26 code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

SS28 is an onsemi Schottky rectifier — 80 V reverse voltage, 2 A average rectified current, forward drop 850 mV at 2 A, DO-214AA (SMB) surface-mount package, −65 °C to +125 °C junction. The 80 V grade in SMB is the selection point: the higher-voltage member of the 2 A SMB Schottky family for 48 V rails and industrial supplies. Selection advice: onsemi lists the SS28 as Active (DigiKey SS28TR-ND). The 2 A SMB family shares the footprint across voltage grades — SS24 (40 V), SS26 (60 V), SS28 (80 V), SS210 (100 V): pick the grade that covers your rail with margin, since one layout serves the whole range. Note the 400 µA reverse leakage at 80 V — verify it against your standby budget. Evidence: DigiKey confirms onsemi SS28 Active, 80 V, 2 A, 0.85 V VF, SMB. Match the full SS28 code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

SS34 is an onsemi 3 A Schottky barrier rectifier in SMC (DO-214AB), tape-and-reel packing — 40 V repetitive peak reverse voltage, 500 mV maximum forward voltage at 3 A, 500 µA reverse leakage at 40 V, 100 A forward surge current, guard ring for overvoltage protection, −55 to +150 °C. The Schottky low forward drop is the selection point: at 3 A it wastes far less power than a silicon PN diode, so output rectification in DC-DC converters, reverse-polarity protection and freewheeling in motor and relay drivers run cooler in the same SMC footprint. Selection advice: the 40 V rating sets the ceiling — for 24 V industrial rails with transients pick the SS35 (50 V) or higher sibling rather than running the SS34 at its limit. The bare SS34 ships in 3000-per-reel tape (SS34FSTR-ND) with cut-tape options for prototypes. onsemi lists SS34 as Active. Evidence: onsemi SS34 datasheet and distributor listings confirm 3 A, 40 V, 500 mV, SMC and tape-and-reel packing. Match the full SS34 code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.