100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsIntegrated CircuitsSTM32F405RGT6
PACKAGE REFERENCELQFP-64Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

STM32F405RGT6

STMicroelectronics

STM32F405RGT6 is an Arm Cortex-M4 microcontroller from STMicroelectronics with 1 MB Flash in a 64-pin LQFP package — for embedded control with large firmware and DSP workloads. The 1 MB Flash in LQFP-64 is the selection point: maximum code space without moving to the 100-pin package, for feature-rich industrial and IoT firmware. Selection advice: the RG code denotes 1 MB Flash and T6 the LQFP-64 package — match the full code, since the STM32F4 family spans many densities. Like all STM32F4 parts, verify peripheral and pinout requirements against the datasheet. This family is heavily counterfeited: require lot and date-code traceability.

Integrated Circuits32-bit microcontrollerLQFP-64
MPN
STM32F405RGT6
Manufacturer
STMicroelectronics
Family
32-bit microcontroller
Package
LQFP-64
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
Lifecycle
Active
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Device and package reference

Manufacturer device/package data only. Full ordering-code validity, grade and current lifecycle are not established by this reference; confirm them during quotation.

Core
Arm Cortex-M4 with FPU and DSP, up to 168 MHz
Flash memory
1 MB
SRAM
192 KB system SRAM + 4 KB backup SRAM
Supply voltage
1.8 V to 3.6 V
Key interfaces
USB OTG HS/FS, 2x CAN 2.0B, SDIO, SPI, I2C (no Ethernet MAC, no camera interface — F407 only)
Peripherals
3x 12-bit ADC, 2x DAC, 17 timers
Order code
R = 64 pins · G = 1 MB Flash · T = LQFP · 6 = −40…+85 °C
Absolute maximum ratings
VDD − VSS −0.3 V to 4.0 V (including VDDA); input voltage on five-volt tolerant pins VSS −0.3 V to VDD + 4.0 V, on any other pin VSS −0.3 V to 4.0 V; variation between different VDD pins and between ground pins 50 mV maximum; total current into VDD power lines 240 mA, out of VSS ground lines 240 mA; output current sunk or sourced by any I/O pin 25 mA; injected current −5/+0 mA on five-volt tolerant I/O, ±5 mA on any other pin, ±25 mA total; storage temperature −65 °C to +150 °C; maximum junction temperature 125 °C (Tables 11–13 in §6.2)
Source: STMicroelectronics DS8626 Rev 12 · §8 Ordering information, §6.2 Absolute maximum ratings (Tables 11–13) · Reviewed 2026-11-02
ORDER-CODE COMPARISON

Same series, different order codes.

STM32F405RG is available in the following manufacturer order codes. They share the same 32-bit microcontroller design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
STM32F405RGT6LQFP-64——
STM32F405RGT6TRLQFP 64 10x10x1.4 mm—Compared with STM32F405RGT6, package and listed temperature grade match, but the order-code suffix differs. Verify the factory packing and PCB footprint before treating order codes as interchangeable.
STM32F405RGT7LQFP 64 10x10x1.4 mm—Compared with STM32F405RGT6, temperature grade changes from -40.0 to 85.0 °C to -40.0 to 105.0 °C. Verify the factory packing and PCB footprint before treating order codes as interchangeable.
STM32F405RGT7TRLQFP 64 10x10x1.4 mm—Compared with STM32F405RGT6, temperature grade changes from -40.0 to 85.0 °C to -40.0 to 105.0 °C. Verify the factory packing and PCB footprint before treating order codes as interchangeable.
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Integrated Circuits records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

STM32F405RGT6 FAQ

What is the difference between STM32F405RGT6 and STM32F405RGT6TR, STM32F405RGT7, STM32F405RGT7TR?

These are order-code variants of the same STMicroelectronics series. They share the core design; the ordering code selects the exact configuration — STM32F405RGT6TR: Compared with STM32F405RGT6, package and listed temperature grade match, but the order-code suffix differs. Verify the factory packing and PCB footprint before treating order codes as interchangeable.; STM32F405RGT7: Compared with STM32F405RGT6, temperature grade changes from -40.0 to 85.0 °C to -40.0 to 105.0 °C. Verify the factory packing and PCB footprint before treating order codes as interchangeable.; STM32F405RGT7TR: Compared with STM32F405RGT6, temperature grade changes from -40.0 to 85.0 °C to -40.0 to 105.0 °C. Verify the factory packing and PCB footprint before treating order codes as interchangeable.. STM32F405RGT6 itself is the LQFP-64 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What are the key specifications of STM32F405RGT6?

From the verified technical profile: Core: Arm Cortex-M4 with FPU and DSP, up to 168 MHz; Flash memory: 1 MB; SRAM: 192 KB system SRAM + 4 KB backup SRAM. These are the catalog-recorded values for STM32F405RGT6 — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.