100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsAnalog ICsAD623ARZ-R7
PACKAGE REFERENCESOIC-8Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

AD623ARZ-R7

Analog Devices

AD623ARZ-R7 is an Analog Devices single-supply instrumentation amplifier, rail-to-rail output, gain 1 to 1000 set by one external resistor, 800 kHz bandwidth at G=1, in SOIC-8 — the sensor front-end amplifier for bridges, thermocouples and low-level transducer signals. The single-resistor gain programming is the selection point: no matched resistor networks to source, with 0.10% gain accuracy at G=1, 200 µV max offset and 550 µA max supply current for battery-powered instruments. Selection advice: it runs on 3 to 12 V single supply or ±2.5 to ±6 V dual supply — but note the input range extends only 150 mV below ground on a single rail, so ground-referenced bipolar sensor signals still need the dual-supply configuration. The R7 suffix is the 7-inch reel (1000 pcs) packing of the SOIC-8. For higher precision or lower noise, compare the AD620/AD8221 family rather than assuming drop-in equivalence. Parameters verified against the ADI AD623 datasheet and Mouser/LCSC listings.

Analog ICsInstrumentation amplifierSOIC-8
MPN
AD623ARZ-R7
Manufacturer
Analog Devices
Family
Instrumentation amplifier
Package
SOIC-8
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Device type
Single-supply instrumentation amplifier with rail-to-rail output
Gain
1-1000, set by a single external resistor: G = 1 + (100kohm/RG); G=1 with no resistor
Supply voltage
Single supply 2.7-12V; dual supply ±2.5V to ±6V
Bandwidth / slew rate
800kHz at G=1; approx. 300mV/us slew rate
Package / ordering
ARZ: 8-lead SOIC_N; R7: 7-inch tape and reel; Z: RoHS compliant
Operating temperature
-40C to +85C
Absolute maximum ratings
Supply voltage 12 V; internal power dissipation 650 mW; differential input voltage ±6 V; output short-circuit duration indefinite; storage temperature −65 °C to +125 °C; operating temperature −40 °C to +85 °C; lead temperature 300 °C (soldering, 10 sec) (Table 5)
Source: Analog Devices AD623 Data Sheet Rev. G · Table 5 Absolute Maximum Ratings, Ordering Guide · Reviewed 2026-11-02
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Analog ICs records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

AD623ARZ-R7 FAQ

What are the key specifications of AD623ARZ-R7?

From the verified technical profile: Device type: Single-supply instrumentation amplifier with rail-to-rail output; Gain: 1-1000, set by a single external resistor: G = 1 + (100kohm/RG); G=1 with no resistor; Supply voltage: Single supply 2.7-12V; dual supply ±2.5V to ±6V. These are the catalog-recorded values for AD623ARZ-R7 — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.