TLV333IDBVR

TLV333IDBVR is the tape-and-reel SOT-23-5 (DBV) ordering code for the Texas Instruments TLV333 zero-drift operational amplifier, listed by TI as Active / Production in the datasheet ordering appendix (SBOS751). It shows input offset voltage of 2 µV typical and 15 µV maximum, offset drift of 0.02 µV/°C typical over -40 °C to +125 °C, quiescent current of 17 µA typical and 28 µA maximum, gain-bandwidth of 350 kHz typical, slew rate of 0.16 V/µs typical, input bias current of ±70 pA typical, common-mode rejection of 102 dB minimum and 115 dB typical, noise of 1.1 µVpp over 0.1 Hz to 10 Hz, and a 1.8 V to 5.5 V supply range. The selection point is microvolt-level signal conditioning at micropower drain: thermocouple, bridge and shunt measurements in battery equipment hold calibration over temperature because the chopper architecture keeps drift near zero. Selection advice: the zero-drift behaviour is the reason to choose this code over a general-purpose amplifier - if the design only needs millivolt accuracy, faster family parts will serve; if it needs the 15 µV maximum offset, no typical-value substitution preserves the error budget. Parameters verified against the TI TLV333 datasheet SBOS751 (ordering appendix and electrical characteristics).