100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsAnalog ICsINA219AIDCNR
PACKAGE REFERENCESOT-23-8Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

INA219AIDCNR

Texas Instruments

INA219AIDCNR is a Texas Instruments zero-drift bidirectional current and power monitor in SOT-23-8, tape and reel — for power telemetry: servers, telecom and test equipment. Reporting bus voltage, shunt current and computed power over I2C is the selection point: full power telemetry from one chip plus a shunt resistor. Selection advice: the DCNR suffix denotes SOT-23-8 in 3000-piece tape and reel — for the SOIC-8 package, the INA219AIDR is the sibling; the A grade versus the higher-accuracy B grade — pick B only if your error budget needs it; the 0 V to 26 V bus range covers most DC rails. 3 V to 5.5 V supply. TI lists this part as ACTIVE. Parameters verified against the TI official product page.

Analog ICsCurrent and power monitorSOT-23-8
MPN
INA219AIDCNR
Manufacturer
Texas Instruments
Family
Current and power monitor
Package
SOT-23-8
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
Lifecycle
Active
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Measurement
Bidirectional current, voltage and power
Bus voltage range
0 V to 26 V
Converter resolution
12 bit
Host interface
I2C / SMBus
Operating supply
3.0 V to 5.5 V
Package
SOT-23-8 tape and reel
Source: Texas Instruments product data · Reviewed 2026-09-21
ORDER-CODE COMPARISON

Same series, different order codes.

INA219 is available in the following manufacturer order codes. They share the same Current and power monitor design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
INA219AIDCNRSOT-23-8——
INA219AIDCNTSOT-23-8SMALL T&RSame SOT-23-8 package as INA219AIDCNR; this difference alone does not require PCB pad changes; factory packing is SMALL T&R, 250 per pack; INA219AIDCNR is LARGE T&R, 3,000 per pack.
INA219AIDRSOIC-8LARGE T&RPackage/pins: SOIC (D), 8 pins; INA219AIDCNR is SOT-23 (DCN), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 2,500 per pack; INA219AIDCNR is LARGE T&R, 3,000 per pack.
INA219BIDCNRSOT-23-8LARGE T&RGrade B accuracy differs from the on-site Grade A: per the manufacturer datasheet at PGA=/1, max input offset is ±50 µV, Grade A is ±100 µV; calibration should be reviewed; same SOT-23-8 package as INA219AIDCNR; this difference alone does not require PCB pad changes.
INA219BIDCNTSOT-23-8SMALL T&RGrade B accuracy differs from the on-site Grade A: per the manufacturer datasheet at PGA=/1, max input offset is ±50 µV, Grade A is ±100 µV; calibration should be reviewed; same SOT-23-8 package as INA219AIDCNR; this difference alone does not require PCB pad changes; factory packing is SMALL T&R, 250 per pack; INA219AIDCNR is LARGE T&R, 3,000 per pack.
INA219BIDRSOIC-8LARGE T&RGrade B accuracy differs from the on-site Grade A: per the manufacturer datasheet at PGA=/1, max input offset is ±50 µV vs ±100 µV for Grade A; calibration should be reviewed; package/pins: SOIC (D), 8 pins; INA219AIDCNR is SOT-23 (DCN), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 2,500 per pack; INA219AIDCNR is LARGE T&R, 3,000 per pack.
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Analog ICs records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

INA219AIDCNR FAQ

What is the difference between INA219AIDCNR and INA219AIDCNT, INA219AIDR, INA219BIDCNR?

These are order-code variants of the same Texas Instruments series. They share the core design; the ordering code selects the exact configuration — INA219AIDCNT: Same SOT-23-8 package as INA219AIDCNR; this difference alone does not require PCB pad changes; factory packing is SMALL T&R, 250 per pack; INA219AIDCNR is LARGE T&R, 3,000 per pack.; INA219AIDR: Package/pins: SOIC (D), 8 pins; INA219AIDCNR is SOT-23 (DCN), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 2,500 per pack; INA219AIDCNR is LARGE T&R, 3,000 per pack.; INA219BIDCNR: Grade B accuracy differs from the on-site Grade A: per the manufacturer datasheet at PGA=/1, max input offset is ±50 µV, Grade A is ±100 µV; calibration should be reviewed; same SOT-23-8 package as INA219AIDCNR; this difference alone does not require PCB pad changes.. INA219AIDCNR itself is the SOT-23-8 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What are the key specifications of INA219AIDCNR?

From the verified technical profile: Measurement: Bidirectional current, voltage and power; Bus voltage range: 0 V to 26 V; Converter resolution: 12 bit. These are the catalog-recorded values for INA219AIDCNR — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.