OPA2188AID

OP07CDR is a Texas Instruments precision operational amplifier in SOIC-8 — for DC measurement front-ends: bridge amplifiers, thermocouple conditioning and precision integrators. 150 µV maximum input offset (C-grade), ±14 nA maximum bias current, 600 kHz gain-bandwidth, ±3 V to ±18 V supply, near-zero offset drift. Heat evidence: precision analog remains on firm allocation as instrumentation and industrial demand holds — the OP07 is the classic precision bipolar op-amp with decades of continuous production. Selection advice: the CDR suffix is SOIC-8 on reel for SMT — same die as the DIP OP07CP; note the older OP07CD (tube) is obsolete, always order the R (reel) variant for current production. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

AD8606ARZ is a dual rail-to-rail precision operational amplifier from Analog Devices in an 8-pin SOIC package — for low-voltage precision systems, data acquisition front ends and medical instrumentation. The combination of precision DC specs with rail-to-rail operation is the selection point: it brings precision-grade offset and drift to single-supply low-voltage designs that older precision op-amps cannot serve. Selection advice: the ARZ suffix denotes SOIC-8 on tape and reel — match the full AD8606ARZ code to your footprint and packing needs. Confirm your offset, drift and noise requirements against the datasheet before substituting for a general-purpose op-amp. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

AD8610AR is an Analog Devices precision JFET-input operational amplifier — for photodiode front ends, precision instrumentation and active filters: 25MHz gain-bandwidth product, JFET input stage with picoamp-level bias current, low offset voltage, SOIC-8 package. The JFET inputs draw negligible bias current, so high-impedance sensor interfaces avoid the loading errors that bipolar-input op amps introduce; the 25MHz bandwidth handles fast signal chains while maintaining precision DC accuracy. Business impact: precision JFET op amps command a premium but eliminate an entire class of front-end error — designs that need both speed and high input impedance have few alternatives at this performance level. Selection advice: the AR suffix denotes SOIC-8 — for space-constrained layouts consider the ARMZ (MSOP) variant; the AD8610 is the single version — for dual-channel designs the AD8620 shares the same core. Ranked #7 on the hqew.com hot list (2026-10-05). Parameters verified against Analog Devices documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ADA4077-2ARZ is an Analog Devices dual precision operational amplifier in 8-lead SOIC, tube packing — 15 µV typical input offset (50 µV max A-grade), 0.25 µV/°C drift, 3.6 MHz gain-bandwidth, 1.2 V/µs slew rate, 1 nA input bias and 400 µA per channel, specified over −40 °C to +125 °C on 5 V to 30 V supplies (±2.5 V to ±15 V). Unity-gain stable with no phase reversal and stable into 1000 pF capacitive loads. The offset-plus-drift combination is the selection point: thermocouple, RTD and strain-gauge front ends hold calibration across temperature without trimming, which is the whole value proposition of a precision op amp. Selection advice: the ARZ code is the tube version — ARZ-R7/ARZ-RL is the same die on tape and reel for pick-and-place; this is not a rail-to-rail output part, so size your signal swing inside the ±15 V rails. For single-channel or quad layouts use the ADA4077-1/ADA4077-4. Evidence: LCSC and element14/Newark listings confirm 15 µV, 3.6 MHz, −40 to +125 °C, SOIC-8 and wide distributor stock. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

AD8605ARTZ-REEL7 is an Analog Devices precision single-channel CMOS operational amplifier — rail-to-rail input and output, 10 MHz gain-bandwidth product, 5 V/µs slew rate — with 20 µV typical / 80 µV maximum offset voltage, 0.2 pA input bias current and 8 nV/√Hz voltage noise, on a single 2.7 to 5.5 V supply, in SOT-23-5, operating -40 to +125 °C. ADI DigiTrim technology is the selection point: laser-trim-grade offset without laser trimming, so microvolt precision holds across production lots for sensor front ends, photodiode amplifiers, active filters and audio stages. Selection advice: the femtoamp-class bias current suits high-impedance sources that would be loaded by bipolar op amps — photodiodes, piezoelectric and electret sensors — but confirm your supply rail is within 5.5 V and that one channel is enough, since the dual AD8606 and quad AD8608 cover multi-channel designs in the same family. The REEL7 suffix is the 7-inch reel (3000 pieces) — match the full code if your line needs a different reel size or tube packing. This is a general-purpose precision part, not automotive qualified. Evidence: ADI datasheet and distributor listings confirm 10 MHz, 5 V/µs, 80 µV max offset, 0.2 pA bias and SOT-23-5. Confirm lead time and availability at RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Analog Devices AD8672ARMZ is a dual precision operational amplifier in an 8-lead MSOP package. Its 2.8 nV/rtHz voltage noise and 75 uV max offset voltage (datasheet Rev. F) give you quiet, accurate front ends for instrumentation, PLL filters, GPS filters and sensor conditioning, so small DC and low-level signals stay clean without extra filtering stages. The 10 MHz gain-bandwidth, 3 mA per amplifier supply current, +-5 V to +-15 V dual-supply range and no-phase-reversal, unity-gain-stable behavior simplify reuse across product variants and cut design risk, protecting margins on repeat builds. Selection advice: the same datasheet covers the single AD8671 and quad AD8674, so match the channel count to your board instead of wiring unused channels, and use the AD8672-EP enhanced product only if you need the -55 C to +125 C defense flow. Featured on hqew.com yesterday-hot list (2026-10-13). Parameters verified against Analog Devices documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

AMC1350DWVR is a Texas Instruments isolated amplifier in 8-pin SOIC — for precision voltage sensing across isolation barriers: reinforced isolation with ±5V input range, optimized for AC voltage measurement in motor drives, solar inverters and power supplies where the high-voltage side must be galvanically separated from the control side. The DWVR code is the SOIC-8 reel variant with 1000-unit reel. Selection advice: the AMC1350 targets AC voltage sensing (±5V input) — for DC shunt-based current sensing the AMC1301 family is the companion choice; for designs needing an integrated DC/DC converter to power the high side, the AMC3330 eliminates the external isolated supply. Against non-isolated precision amps on this site, the isolation barrier is the differentiator — do not substitute a non-isolated amp where safety isolation is required. Heat evidence: listed in Octopart Linear ICs Popular Parts (octopart.com, verified 2026-10-09); TI E2E forum shows active customer evaluation for high-voltage measurement. Parameters verified against TI documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TI lists INA219AID as OBSOLETE — a 26 V, 12-bit I2C digital power monitor in 8-pin SOIC-8 (D) tube, for bidirectional current and power measurement with 0–26 V common-mode range and programmable gain. Important for procurement: only this tube-packing ordering code is obsolete — TI confirms the tape-and-reel variant INA219AIDR remains active, so if your assembly can take reel packing, qualify INA219AIDR as the drop-in replacement rather than chasing obsolete tube stock. Selection advice: for repairs and last-time builds of the AID code, send quantity and date-code requirements with your RFQ and we will check what can still be sourced with traceability; for new designs, specify INA219AIDR or a current-generation power monitor. Parameters verified against the TI official product page. We reconfirm the offered lot before quotation and reply within 24 hours.

Texas Instruments lists INA219AIDR as an ACTIVE digital current and power monitor in SOIC-8 — for I2C-based power measurements with 0–26 V common-mode range, 12-bit resolution and programmable gain. The digital I2C output is the selection point: current, voltage and computed power read directly by the host MCU, no analog signal chain needed. Selection advice: the AIDR suffix denotes SOIC-8 on tape and reel — the tube-packing INA219AID code is obsolete, so for production specify INA219AIDR. Confirm your shunt resistor value and current range against the datasheet before committing. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

INA219BIDR is a Texas Instruments B-grade zero-drift bidirectional current/power monitor in SOIC-8, 3000-piece large reel — 0.5% maximum accuracy over temperature (B grade), 0–26 V bus sensing, 3–5.5 V supply, 12-bit ADC with programmable averaging to 128 samples, calibration register for direct ampere and watt readouts, 16 programmable I2C addresses, −40 °C to +125 °C. The SOIC-8 package is the selection point: the same B-grade 0.5% die as the SOT-23 variants, but in a package that hand-solders and reworks comfortably — a real advantage for repair, rework and low-cost assembly flows. Selection advice: the D code is SOIC-8 — not footprint-compatible with the SOT-23-8 INA219BIDCNR/IDCNT, so pick the package before the PCB is taped out. The R suffix is the 3000-piece reel for volume; for small runs the SOT-23 T-reel variant is the economical prototype path. Evidence: TI INA219 datasheet (Rev. G) confirms B-grade 0.5%, SOIC-8 and the 3000-reel option. Match the full INA219BIDR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.