TMAG5170

AH4931Q-W6-7 is a Diodes Incorporated automotive-qualified 3D Hall-effect sensor — for contactless position and direction sensing: three-axis magnetic field detection, Q-suffix automotive qualification, SOT-26 (Type CJ) package. A single 3D Hall IC replaces multiple single-axis sensors plus the mechanical linkages they need — contactless sensing eliminates wear in knobs, pedals and gear selectors; the automotive Q grade meets AEC-Q100 change-control requirements for in-cabin and under-hood designs. Business impact: 3D Hall sensors consolidate position-sensing BOMs — one qualified part instead of two or three discretes with alignment fixtures. Selection advice: the Q-W6-7 code is the automotive SOT-26 variant in tape-and-reel — for standard grade consider the AH4931; verify the magnetic operating points (Bop/Brp) against the actuator magnet in the Diodes datasheet. Featured on Mouser New Products (2026-10-13). Parameters verified against Diodes Incorporated documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TI lists LM35DZ/NOPB as Active (In Stock) — a 10 mV/°C linear analog temperature sensor, 0 to +100 °C, in a TO-92 3-pin package. The linear 10 mV/°C output is the selection point: temperature reads directly with a voltmeter or ADC, no lookup tables or linearization math. Selection advice: the /NOPB suffix denotes the lead-free orderable code — the bare LM35DZ code is superseded, so specify LM35DZ/NOPB for new orders. For new digital designs, compare against I2C digital sensors; for simple analog monitoring and repairs, match this code exactly. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

OPT3001 is a Texas Instruments digital ambient light sensor in 2x2mm USON-6 — for display backlight control, lighting systems and human-centric IoT where the light reading must match human perception: 0.01 lux to 83k lux measurement with 23-bit effective dynamic range via automatic gain ranging, precision optical filtering that rejects >99% of IR, and 1.8µA typical operating current. I2C/SMBus interface with autonomous interrupt operation lets the host MCU sleep while the sensor watches for light-level events. Selection advice: the human-eye-matched spectral response is the differentiator over discrete photodiodes — for higher speed and precision, the OPT4001 on this site is the upgrade path; the USON package suits space-constrained designs but needs careful reflow profiling. Confirm the I2C address option against your bus layout. Parameters verified against TI documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

OPT3001DNPR is a digital ambient light sensor from Texas Instruments in a USON-6 package, with human-eye spectral response — for display backlight control, lighting systems and optical switching. The human-eye-matched spectral response is the selection point: it measures what people actually perceive, so display dimming tracks real viewing conditions instead of raw lux. Selection advice: the DNPR suffix denotes USON-6 on tape and reel — match the full OPT3001DNPR code to your footprint. Confirm your lux range and interrupt needs against the datasheet. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

OPT4001 is a Texas Instruments high-speed, high-precision digital ambient light sensor — for display backlight control and human-presence lighting where the sensor must see what the human eye sees: precision optical filtering matches the photopic response with strong near-infrared rejection, so readings stay accurate behind dark cover glass. Semi-logarithmic output with automatic full-scale selection covers 312.5 µlux to 83 klux (PicoStar) without host gain management, and 12 conversion times from 600 µs to 800 ms trade speed against resolution. Selection advice: two packages exist — the SOT-5X3 (DTS) with interrupt pin for hardware wake-up, and the smaller PicoStar (YMN) without it; pick DTS when the host needs threshold interrupts, YMN for minimum footprint. This is the upgrade path from the OPT3001 — for new designs prefer the 4001 for its wider dynamic range. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TMP117AIDRVR is a high-accuracy digital temperature sensor from Texas Instruments in a 6-pin WSON package, with an I2C interface — for precision thermal monitoring in medical, industrial and test equipment. High accuracy without calibration is the selection point: where an NTC thermistor needs per-unit calibration, the TMP117 delivers calibrated digital readings out of the box, removing a production step. Selection advice: the DRVR suffix denotes the WSON-6 package on tape and reel — match the full code to your layout. Confirm your accuracy requirement against the datasheet before paying for precision you do not need; for coarse monitoring a cheaper sensor suffices. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Texas Instruments lists TMP117AIYBGR as a digital temperature sensor in DSBGA-6 — for I2C temperature-monitoring designs that need high accuracy without calibration. The ±0.1 °C-class accuracy is the selection point: it replaces thermistor-plus-calibration designs with a direct digital readout, cutting production test time. Selection advice: the AIYBGR suffix denotes DSBGA-6 on tape and reel — the TMP117 ships in multiple packages, so match the full TMP117AIYBGR code to your footprint. Confirm your accuracy and temperature-range requirements against the datasheet; for cost-driven designs, a lower-grade sensor may suffice. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Texas Instruments lists TMP117MAIDRVR as an M-grade digital temperature sensor in WSON-6 — for I2C temperature-monitoring designs that need a solderable package with high accuracy. The WSON-6 package is the selection point within the TMP117 family: easier assembly and inspection than the DSBGA chip-scale variant, at the cost of board space. Selection advice: the MAIDRVR suffix denotes the M accuracy grade in WSON-6 on tape and reel — match the full code, since the TMP117 ships in DSBGA and WSON with multiple grades. Confirm your accuracy needs against the datasheet; the N grade is the looser-tolerance alternative. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Texas Instruments lists TMP117MAIYBGR as an M-grade digital temperature sensor in DSBGA-6 — for I2C temperature-monitoring designs where board space is critical. The DSBGA chip-scale package is the selection point: the smallest TMP117 footprint for dense layouts, trading assembly ease for size. Selection advice: the MAIYBGR suffix denotes the M accuracy grade in DSBGA-6 on tape and reel — match the full code, since the family spans DSBGA and WSON packages with M and N grades. For easier soldering, the WSON-6 MAIDRVR is the alternative in the same grade. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Texas Instruments lists TMP117NAIYBGR as an N-grade digital temperature sensor in DSBGA-6 — for I2C temperature-monitoring designs where the M grade accuracy is more than needed. The N grade is the selection point: the cost-optimized TMP117 for applications that accept looser tolerance in the same tiny DSBGA-6 footprint. Selection advice: the NAIYBGR suffix denotes the N accuracy grade in DSBGA-6 on tape and reel — match the full code, and confirm your accuracy requirements against the datasheet before choosing N over M. For the tighter tolerance, specify the M-grade MAIYBGR instead. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.