100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsSensorsLIS2DH12TR
PACKAGE REFERENCELGA-12Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

LIS2DH12TR

STMicroelectronics

LIS2DH12TR is an ultra-low-power digital three-axis accelerometer from STMicroelectronics in an LGA-12 package — for motion sensing in battery-powered devices. The sub-microamp power-down current with motion-wake interrupts is the selection point: long operation on a coin cell for asset trackers and activity monitors. Selection advice: the TR suffix denotes tape and reel — match the full LIS2DH12TR code for production orders. This is a mature, proven part: confirm your full-scale range and data-rate needs against the datasheet.

Sensors3-axis accelerometerLGA-12
MPN
LIS2DH12TR
Manufacturer
STMicroelectronics
Family
3-axis accelerometer
Package
LGA-12
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function
Ultra-low-power 3-axis linear accelerometer (femto design) · digital output
Full-scale range
±2 / ±4 / ±8 / ±16 g user-selectable (Table 4; table-header conditions Vdd = 2.5 V, T = 25 °C)
Sensitivity
Normal mode (10-bit): 4 / 8 / 16 / 48 mg/digit at ±2 / ±4 / ±8 / ±16 g; low-power mode (8-bit): 16 / 32 / 64 / 192 mg/digit; high-resolution mode (12-bit): 1 mg/digit at ±2 g (Table 4)
Noise density
220 µg/√Hz · FS = ±2 g, high-resolution mode, ODR > 1300 Hz (Table 4)
Output data rate
1 Hz to 5.3 kHz (Table 12; up to 5376 Hz in normal and high-resolution modes)
Supply
Vdd 1.71 V minimum / 2.5 V typical / 3.6 V maximum; Vdd_IO 1.71 V minimum to Vdd + 0.1 V maximum (Table 6)
Current consumption
Low-power mode 2 µA at 1 Hz ODR; normal mode 11 µA at 50 Hz ODR; power-down 0.5 µA typical (Tables 6 and 12)
Interface
I2C (100 kHz / 400 kHz) and SPI (up to 10 MHz) (Tables 7–8)
Embedded features
Temperature sensor (output change 1 digit/°C, Table 5); FIFO buffer; two programmable interrupt generators; zero-g offset ±40 mg typical and sensitivity change ±0.01 %/°C (Table 4)
Absolute maximum ratings
Vdd and Vdd_IO −0.3 V to +4.8 V, acceleration survival 10000 g for 0.2 ms, input voltage on any pin −0.3 V to Vdd_IO + 0.3 V and storage −40 °C to +125 °C are Table 9 absolute-maximum figures, not operating ranges
Order-code package
LGA-12 · LIS2DH12TR is the only order code in the device summary (Table 1), tape and reel
Manufacturer packing
The data sheet gives carrier-tape and reel drawings but prints no pieces-per-reel figure (§9.2) — confirm the reel quantity with the offer
Source: ST LIS2DH12 Datasheet DocID025056 Rev 6 (May 2017) · Tables 1, 4, 5, 6, 9 and 12 · Reviewed 2026-10-30
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Sensors records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

LIS2DH12TR FAQ

What are the key specifications of LIS2DH12TR?

From the verified technical profile: Function: Ultra-low-power 3-axis linear accelerometer (femto design) · digital output; Full-scale range: ±2 / ±4 / ±8 / ±16 g user-selectable (Table 4; table-header conditions Vdd = 2.5 V, T = 25 °C); Sensitivity: Normal mode (10-bit): 4 / 8 / 16 / 48 mg/digit at ±2 / ±4 / ±8 / ±16 g; low-power mode (8-bit): 16 / 32 / 64 / 192 mg/digit; high-resolution mode (12-bit): 1 mg/digit at ±2 g (Table 4). These are the catalog-recorded values for LIS2DH12TR — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.