LM35DZ/NOPB

OPT3001 is a Texas Instruments digital ambient light sensor in 2x2mm USON-6 — for display backlight control, lighting systems and human-centric IoT where the light reading must match human perception: 0.01 lux to 83k lux measurement with 23-bit effective dynamic range via automatic gain ranging, precision optical filtering that rejects >99% of IR, and 1.8µA typical operating current. I2C/SMBus interface with autonomous interrupt operation lets the host MCU sleep while the sensor watches for light-level events. Selection advice: the human-eye-matched spectral response is the differentiator over discrete photodiodes — for higher speed and precision, the OPT4001 on this site is the upgrade path; the USON package suits space-constrained designs but needs careful reflow profiling. Confirm the I2C address option against your bus layout. Parameters verified against TI documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

OPT3001DNPR is a digital ambient light sensor from Texas Instruments in a USON-6 package, with human-eye spectral response — for display backlight control, lighting systems and optical switching. The human-eye-matched spectral response is the selection point: it measures what people actually perceive, so display dimming tracks real viewing conditions instead of raw lux. Selection advice: the DNPR suffix denotes USON-6 on tape and reel — match the full OPT3001DNPR code to your footprint. Confirm your lux range and interrupt needs against the datasheet. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

OPT4001 is a Texas Instruments high-speed, high-precision digital ambient light sensor — for display backlight control and human-presence lighting where the sensor must see what the human eye sees: precision optical filtering matches the photopic response with strong near-infrared rejection, so readings stay accurate behind dark cover glass. Semi-logarithmic output with automatic full-scale selection covers 312.5 µlux to 83 klux (PicoStar) without host gain management, and 12 conversion times from 600 µs to 800 ms trade speed against resolution. Selection advice: two packages exist — the SOT-5X3 (DTS) with interrupt pin for hardware wake-up, and the smaller PicoStar (YMN) without it; pick DTS when the host needs threshold interrupts, YMN for minimum footprint. This is the upgrade path from the OPT3001 — for new designs prefer the 4001 for its wider dynamic range. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TMAG5170 is a Texas Instruments high-precision linear 3D Hall-effect sensor — for contactless position sensing in industrial and automotive designs: three independent Hall elements on X, Y and Z axes with a 12-bit ADC delivering 20 ksps, ±2.6% max linear error and an integrated CORDIC engine for full 360-degree angle calculation. On-chip temperature sensing enables system-level drift compensation, and SPI with CRC plus diagnostics suit safety-related designs. Selection advice: two field-range variants exist — the A1 (±25/±50/±100 mT) for close-range precision, the A2 (±75/±150/±300 mT) for larger air gaps; pick the range before magnet selection, not after. For I2C instead of SPI, the TMAG5173 is the sibling. The -40 to +150C range covers under-hood use — for full automotive qualification specify the TMAG5170-Q1. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TMP117AIDRVR is a high-accuracy digital temperature sensor from Texas Instruments in a 6-pin WSON package, with an I2C interface — for precision thermal monitoring in medical, industrial and test equipment. High accuracy without calibration is the selection point: where an NTC thermistor needs per-unit calibration, the TMP117 delivers calibrated digital readings out of the box, removing a production step. Selection advice: the DRVR suffix denotes the WSON-6 package on tape and reel — match the full code to your layout. Confirm your accuracy requirement against the datasheet before paying for precision you do not need; for coarse monitoring a cheaper sensor suffices. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Texas Instruments lists TMP117AIYBGR as a digital temperature sensor in DSBGA-6 — for I2C temperature-monitoring designs that need high accuracy without calibration. The ±0.1 °C-class accuracy is the selection point: it replaces thermistor-plus-calibration designs with a direct digital readout, cutting production test time. Selection advice: the AIYBGR suffix denotes DSBGA-6 on tape and reel — the TMP117 ships in multiple packages, so match the full TMP117AIYBGR code to your footprint. Confirm your accuracy and temperature-range requirements against the datasheet; for cost-driven designs, a lower-grade sensor may suffice. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Texas Instruments lists TMP117MAIDRVR as an M-grade digital temperature sensor in WSON-6 — for I2C temperature-monitoring designs that need a solderable package with high accuracy. The WSON-6 package is the selection point within the TMP117 family: easier assembly and inspection than the DSBGA chip-scale variant, at the cost of board space. Selection advice: the MAIDRVR suffix denotes the M accuracy grade in WSON-6 on tape and reel — match the full code, since the TMP117 ships in DSBGA and WSON with multiple grades. Confirm your accuracy needs against the datasheet; the N grade is the looser-tolerance alternative. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Texas Instruments lists TMP117MAIYBGR as an M-grade digital temperature sensor in DSBGA-6 — for I2C temperature-monitoring designs where board space is critical. The DSBGA chip-scale package is the selection point: the smallest TMP117 footprint for dense layouts, trading assembly ease for size. Selection advice: the MAIYBGR suffix denotes the M accuracy grade in DSBGA-6 on tape and reel — match the full code, since the family spans DSBGA and WSON packages with M and N grades. For easier soldering, the WSON-6 MAIDRVR is the alternative in the same grade. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Texas Instruments lists TMP117NAIYBGR as an N-grade digital temperature sensor in DSBGA-6 — for I2C temperature-monitoring designs where the M grade accuracy is more than needed. The N grade is the selection point: the cost-optimized TMP117 for applications that accept looser tolerance in the same tiny DSBGA-6 footprint. Selection advice: the NAIYBGR suffix denotes the N accuracy grade in DSBGA-6 on tape and reel — match the full code, and confirm your accuracy requirements against the datasheet before choosing N over M. For the tighter tolerance, specify the M-grade MAIYBGR instead. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

DS18B20 is an Analog Devices/Maxim 1-Wire digital thermometer — programmable 9–12 bit resolution, ±0.5 °C accuracy (−10 to +85 °C), −55 to +125 °C range, 3–5.5 V supply, 3-pin TO-92. The 1-Wire bus is the selection point: dozens of sensors share one MCU pin with unique 64-bit IDs — the default temperature sensor for multi-point monitoring. Selection advice: order-code warning — the bare DS18B20 (tin-lead, no + suffix) is listed as Obsolete and RoHS non-compliant by distributors; the lead-free DS18B20+ is the production variant (DigiKey lists it as the direct substitute with stock). For new designs always specify the DS18B20+ — the bare code will fail RoHS compliance. For parasite-power mode verify the pull-up and timing against the datasheet. Evidence: DigiKey confirms bare DS18B20 Obsolete/RoHS non-compliant and DS18B20+ as direct substitute; ADI data confirms 12-bit, ±0.5 °C, TO-92. Match the full code including the + suffix. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.