DRV8313PWPR

DRV8245HQPWPRQ1 is a Texas Instruments automotive-grade (AEC-Q100) 40 V, 32 A H-bridge driver — 28-pin HTSSOP with hardwired control interface, 4.5–35 V supply, 40 mΩ RON, −40 to +125 °C. The AEC-Q100 32 A rating is the selection point: automotive-qualified high-current H-bridge for 12/24 V systems — body electronics, pumps and actuators. Selection advice: TI lists the DRV8245HQPWPRQ1 as Active. The HQPWPRQ1 code pins the hardwired-interface HTSSOP-28 automotive variant — match it exactly; the SQPWPRQ1 is the SPI-interface sibling and the DRV8244 is the 21 A version. The 40 mΩ on-resistance keeps 32 A dissipation manageable — verify the thermal vias under the exposed pad. Evidence: TI data confirms Active, AEC-Q100, 40 V, 32 A, HTSSOP-28, hardwired interface. Match the full DRV8245HQPWPRQ1 code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

DRV8245SQPWPRQ1 is a Texas Instruments automotive-grade (AEC-Q100) 40 V, 32 A H-bridge driver — 28-pin HTSSOP with SPI control interface, 4.5–35 V supply, 40 mΩ RON, −40 to +125 °C. The SPI interface is the selection point: software-configurable protection and diagnostics for automotive H-bridges — the configurable sibling of the hardwired DRV8245H. Selection advice: TI lists the DRV8245SQPWPRQ1 as Active. The SQPWPRQ1 code pins the SPI-interface HTSSOP-28 automotive variant — match it exactly; the HQPWPRQ1 is the hardwired sibling and the DRV8244 is the 21 A version. Budget SPI firmware against the hardwired variant simplicity. Evidence: TI data confirms Active, AEC-Q100, 40 V, 32 A, HTSSOP-28, SPI interface. Match the full DRV8245SQPWPRQ1 code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

DRV8424EPWPR is a Texas Instruments 35 V, 2.5 A stepper / 4 A peak brushed dual H-bridge driver — 28-pin HTSSOP with integrated current sensing (no external shunt resistor), 4.5–33 V supply, −40 to +125 °C. The integrated current sensing is the selection point: no external shunt resistors — smaller BOM and no sense-resistor layout for 2.5 A stepper drive. Selection advice: TI lists the DRV8424EPWPR as In Production. The EPWPR suffix pins the HTSSOP-28 package on tape and reel — match it to your footprint; the exposed thermal pad needs soldered copper. The −40 to +125 °C grade suits industrial designs. For basic 1.9 A stepping the DRV8811 is cheaper; choose the DRV8424 where the shuntless sensing pays off. Evidence: TI data confirms In Production, 35 V, 2.5 A, integrated current sense, HTSSOP-28. Match the full DRV8424EPWPR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

DRV8811PWPR is a Texas Instruments 38 V, 1.9 A bipolar stepper motor driver — 28-pin HTSSOP, 8–38 V supply, indexer with built-in current-decay modes, −40 to +85 °C. The built-in indexer is the selection point: step and direction in, microstepped coil currents out — no MCU PWM sequencing needed. Selection advice: TI lists the DRV8811PWPR as In Production. The PWPR suffix pins the HTSSOP-28 package on tape and reel — match it to your footprint; the exposed thermal pad needs soldered copper for the 1.9 A rating. For higher current steppers use the DRV8841 (2.5 A) instead. Evidence: TI data confirms In Production, 38 V, 1.9 A stepper driver, HTSSOP-28, indexer. Match the full DRV8811PWPR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

DRV8841PWPR is a Texas Instruments 45 V, 2.5 A bipolar stepper or dual H-bridge motor driver — 28-pin HTSSOP with current regulation and PWM control, 8.2–45 V supply, −40 to +85 °C. The dual-mode operation is the selection point: one stepper or two brushed DC motors from the same chip — flexible motor drive for multi-motor products. Selection advice: TI lists the DRV8841PWPR as In Production. The PWPR suffix pins the HTSSOP-28 package on tape and reel — match it to your footprint; the exposed thermal pad needs soldered copper for the 2.5 A rating. For 5 A single bridges use the DRV8842 instead. Evidence: TI data confirms In Production, 45 V, 2.5 A, stepper/dual-H-bridge, HTSSOP-28. Match the full DRV8841PWPR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

DRV8842PWPR is a Texas Instruments 47 V, 5 A single H-bridge motor driver — current regulation, 28-pin HTSSOP, 8.2–45 V supply, −40 to +85 °C. The 5 A single bridge is the selection point: high-current brushed DC drive with current regulation — for larger motors where dual-bridge chips run out of current. Selection advice: TI lists the DRV8842PWPR as In Production. The PWPR suffix pins the HTSSOP-28 package on tape and reel — match it to your footprint; the exposed thermal pad needs generous soldered copper for the 5 A rating. For dual-motor 2.5 A drive use the DRV8841 instead. Evidence: TI data confirms In Production, 47 V, 5 A single H-bridge, HTSSOP-28. Match the full DRV8842PWPR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ADS7846 is a Texas Instruments 4-wire resistive touch screen controller in 16-pin TSSOP — the industry-standard part behind two decades of PDAs, point-of-sale terminals and portable instruments: 2.2 V to 5.25 V operation, internal 2.5 V reference, direct battery measurement from 0 V to 6 V, on-chip temperature and touch-pressure measurement, SPI/QSPI 3-wire interface, auto power-down, under 0.75 mW typical at 2.7 V, 125 kHz throughput, -40 to +85 °C. The pin-compatible upgrade path is the selection point: it drops into ADS7843 sockets with only software changes, adding battery and temperature measurement the older part lacks — which is why it remains the default choice for resistive-touch retrofits and long-life industrial designs. Selection advice: for new designs needing 1.5 V digital I/O, the TSC2046 on this site is the pin-compatible successor; the TSSOP-16 is the standard package, with QFN-16 and VFBGA-48 for space-constrained boards. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

AM2434BSDFHIALVR is a Texas Instruments Sitara AM243x high-performance MCU: up to four 800 MHz Arm Cortex-R5F cores, a 400 MHz Cortex-M4F, and dual gigabit PRU-ICSSG industrial-communication subsystems in a 441-ball FCBGA (17.2 x 17.2 mm). It is TI's consolidation play for factory automation — the R5F cluster delivers deterministic servo-loop control while the PRU-ICSSG runs full protocol stacks for EtherCAT target, PROFINET device and EtherNet/IP adapter on the same silicon, replacing architectures that needed an MCU plus an external industrial-Ethernet ASIC or FPGA. Heat evidence: the AM243x is TI's mainstream platform for servo drives and remote I/O modules, and its datasheet remains under active revision (Rev. J, 2026), signaling continued TI investment in the family. Selection advice: the full orderable encodes silicon revision, feature configuration, temperature grade and the ALV 441-ball FCBGA package on tape and reel — match it character-for-character; the ALX 293-ball FCCSP is a smaller, footprint-incompatible alternative, and R5F count plus PRU features vary across AM2431/32/34. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

AM6232ATGGHIALWR is a Texas Instruments Sitara AM62x processor: dual 1.4 GHz Arm Cortex-A53 plus a Cortex-M4F in a 425-ball FCCSP (13 x 13 mm). The value proposition is Linux-class compute at microcontroller-class power — the A53 pair runs full Yocto/Debian HMI stacks while the M4F handles real-time I/O, so one device replaces an applications processor plus a companion MCU in industrial panels and gateways, and deep-sleep states in the milliwatt class simplify thermal and power design. TI's long-lifecycle industrial positioning protects multi-year programs from forced redesigns. Heat evidence: the AM62x family has been one of TI's most heavily promoted industrial platforms since its 2022 launch, with broad trade-press coverage and multiple third-party system-on-module vendors building AM62x-based products for HMI and edge AI. Selection advice: the ALW FCCSP-425 is the compact package variant — the AM625/AM623/AM620-Q1 family shares one TI product folder, so confirm the exact orderable against the datasheet because family members differ in feature set; the G temperature code and W carrier suffix must match your assembly flow. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

AWR2944ABGALTRQ1 is a Texas Instruments 76–81 GHz single-chip FMCW radar sensor in 266-ball FCCSP, tape and reel — 4 transmit and 4 receive channels, Arm Cortex-R5F plus C66x DSP plus radar hardware accelerator for signal processing, 4 MB on-chip memory, CAN-FD, Ethernet, hardware security module, AEC-Q100 qualified and ASIL-B capable. The fourth transmitter is the selection point: 33% higher angular resolution than previous-generation corner radars, which is what enables reliable blind-spot detection, lane-change assist and cross-traffic alert under UN R79 and NCAP requirements. Selection advice: the R suffix is tape and reel, Q1 is the automotive qualification; lower-cost LC/ECO variants exist for non-safety designs, so do not pay for the ASIL-B part in a non-safety application. Automotive radar designs require RF layout discipline — follow the TI reference design, not a generic BGA flow. Evidence: the TI AWR2944 datasheet (device nomenclature and packaging addendum) confirms the 4×4 channels, 266-ball FCCSP, reel packing and automotive qualification. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.