100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsIntegrated CircuitsSN74LVC2G74DCTR
PACKAGE REFERENCESSOP-8Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

SN74LVC2G74DCTR

Texas Instruments

SN74LVC2G74DCTR is a dual D-type flip-flop from Texas Instruments in SSOP-8 — for clock-domain crossing, data synchronization and signal conditioning in mixed-voltage designs. The 1.65 V to 5.5 V LVC range is the selection point: it bridges low-voltage logic to 5 V systems in a single tiny package. Selection advice: the 2G denotes the dual-gate "little logic" family — use it for point fixes on an existing board rather than redesigning glue logic. The DCTR suffix denotes SSOP-8 in tape and reel. For single-gate needs, the 1G family saves board space.

Integrated CircuitsLogic — D-type flip-flopSSOP-8
MPN
SN74LVC2G74DCTR
Manufacturer
Texas Instruments
Family
Logic — D-type flip-flop
Package
SSOP-8
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function
Single positive-edge-triggered D-type flip-flop with clear and preset
Operating supply range
1.65 V to 5.5 V
Input tolerance
Inputs accept voltages up to 5.5 V
Maximum clock frequency
200 MHz
Propagation delay
5.9 ns maximum at 3.3 V
Output drive
±24 mA at 3.3 V (32 mA maximum IOL/IOH)
Package
SSOP-8 (DCT); R = large tape and reel; Ioff partial-power-down support
Operating temperature range
-40°C to 125°C
Source: Texas Instruments product data · Reviewed 2026-09-28
ORDER-CODE COMPARISON

Same series, different order codes.

SN74LVC2G74 is available in the following manufacturer order codes. They share the same Logic — D-type flip-flop design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
SN74LVC2G74DCTRSSOP-8——
SN74LVC2G74DCURVSSOP-8LARGE T&RPackage/pins: VSSOP (DCU), 8 pins; SN74LVC2G74DCTR is SSOP (DCT), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinoutt.
SN74LVC2G74DCUTVSSOP-8SMALL T&RPackage/pins: VSSOP (DCU), 8 pins; SN74LVC2G74DCTR is SSOP (DCT), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is SMALL T&R, 250 per pack; SN74LVC2G74DCTR is LARGE T&R, 3,000 per pack.
SN74LVC2G74YZPRDSBGA-8LARGE T&RPackage/pins: DSBGA (YZP), 8 pins; SN74LVC2G74DCTR is SSOP (DCT), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; rated operating temperature changes from -40 to 125 °C to -40 to 85 °C — verify the temperature grade.
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Integrated Circuits records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

SN74LVC2G74DCTR FAQ

What is the difference between SN74LVC2G74DCTR and SN74LVC2G74DCUR, SN74LVC2G74DCUT, SN74LVC2G74YZPR?

These are order-code variants of the same Texas Instruments series. They share the core design; the ordering code selects the exact configuration — SN74LVC2G74DCUR: Package/pins: VSSOP (DCU), 8 pins; SN74LVC2G74DCTR is SSOP (DCT), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinoutt.; SN74LVC2G74DCUT: Package/pins: VSSOP (DCU), 8 pins; SN74LVC2G74DCTR is SSOP (DCT), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is SMALL T&R, 250 per pack; SN74LVC2G74DCTR is LARGE T&R, 3,000 per pack.; SN74LVC2G74YZPR: Package/pins: DSBGA (YZP), 8 pins; SN74LVC2G74DCTR is SSOP (DCT), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; rated operating temperature changes from -40 to 125 °C to -40 to 85 °C — verify the temperature grade.. SN74LVC2G74DCTR itself is the SSOP-8 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What are the key specifications of SN74LVC2G74DCTR?

From the verified technical profile: Function: Single positive-edge-triggered D-type flip-flop with clear and preset; Operating supply range: 1.65 V to 5.5 V; Input tolerance: Inputs accept voltages up to 5.5 V. These are the catalog-recorded values for SN74LVC2G74DCTR — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.

What should I check before substituting SN74LVC2G74DCTR with another Logic — D-type flip-flop?

Match the full ordering code, not the series name: package (SSOP-8), temperature grade and packing all ride on the suffixes. A same-series code in a different package is a different orderable device, so confirm the substitute against the Texas Instruments datasheet before changing the BOM.