100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsPower ManagementTPS5430DDA
PACKAGE REFERENCESO PowerPAD-8Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

TPS5430DDA

Texas Instruments

TPS5430DDA is a Texas Instruments 3 A step-down (buck) converter, 5.5 to 36 V input, 1.221 to 31 V adjustable output, fixed 500 kHz, in the 8-pin HSOP PowerPAD package (DDA = tube packing) — the classic 24 V-bus to 5 V/3.3 V workhorse for industrial controls, PLCs and communication power. The 36 V input ceiling plus internal 110 mΩ high-side MOSFET is the selection point: it regulates 24 V nominal rails (with surge headroom) down to logic voltages with few external parts, using voltage-mode control with input feed-forward and internal compensation to simplify loop design. Selection advice: the DDA suffix is the tube-packed HSOP-8 PowerPAD; order TPS5430DDAR for tape and reel — same die, different packing, so match the suffix to your SMT line. This is a non-synchronous buck, so the external Schottky diode (e.g. B340A in the TI reference design) is mandatory, not optional; and the exposed PowerPAD must be soldered to the PCB for rated thermal performance. For lower-voltage rails compare TPS5431 (23 V max input); for a synchronous alternative without the diode, look at a different family. Parameters verified against TI datasheet SLVS632.

Power ManagementStep-down regulatorSO PowerPAD-8
MPN
TPS5430DDA
Manufacturer
Texas Instruments
Family
Step-down regulator
Package
SO PowerPAD-8
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
Lifecycle
Active
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Topology
Step-down buck converter
Input voltage
5.5 V to 36 V
Continuous output current
3 A
Switching frequency
500 kHz
Adjustable output
Down to 1.22 V
Package
SO PowerPAD-8
Source: Texas Instruments product data · Reviewed 2026-09-29
ORDER-CODE COMPARISON

Same series, different order codes.

TPS5430 is available in the following manufacturer order codes. They share the same Step-down regulator design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
TPS5430DDASO PowerPAD-8TubeTube
TPS5430DDARSO PowerPAD-8Large tape and reelTape and reel
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Power Management records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

MARKET INSIGHTS

Procurement coverage for TPS5430DDA

In-depth buyer guides on the market forces affecting this part category — allocation, mergers and technology shifts.

COMMON QUESTIONS

TPS5430DDA FAQ

What is the difference between TPS5430DDA and TPS5430DDAR?

These are order-code variants of the same Texas Instruments series. They share the core design; the ordering code selects the exact configuration — TPS5430DDAR: Tape and reel. TPS5430DDA itself is the SO PowerPAD-8 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What are the key specifications of TPS5430DDA?

From the verified technical profile: Topology: Step-down buck converter; Input voltage: 5.5 V to 36 V; Continuous output current: 3 A. These are the catalog-recorded values for TPS5430DDA — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.