SOURCEICSCOMPONENT SOURCING
EMAIL SALESsales@sourceics.com RFQ LIST 00
ProductsSensorsTMP117AIYBGR
PACKAGE REFERENCEDSBGA-6Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

TMP117AIYBGR

Texas Instruments

Texas Instruments lists TMP117AIYBGR as a digital temperature sensor in DSBGA-6 — for I2C temperature-monitoring designs that need high accuracy without calibration. The ±0.1 °C-class accuracy is the selection point: it replaces thermistor-plus-calibration designs with a direct digital readout, cutting production test time. Selection advice: the AIYBGR suffix denotes DSBGA-6 on tape and reel — the TMP117 ships in multiple packages, so match the full TMP117AIYBGR code to your footprint. Confirm your accuracy and temperature-range requirements against the datasheet; for cost-driven designs, a lower-grade sensor may suffice. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

SensorsTMP117DSBGA-6
Add to RFQ
MPN
TMP117AIYBGR
Manufacturer
Texas Instruments
Family
TMP117
Package
DSBGA-6
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Lifecycle
Active
PROCUREMENT DATA

Identity and sourcing requirements.

Manufacturer part number
TMP117AIYBGR
Manufacturer
Texas Instruments
Product family
TMP117
Category
Sensors
Package reference
DSBGA-6
Manufacturer-channel report
Confirmed on request
Sourceics price status
Quoted for required quantity
Sourceics sourcing status
Supplier and stock verified during RFQ
Required order checks
Suffix, package, date code, lot, source and traceability
MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Package code
DSBGA (YBG)
Pin count
6
Operating temperature
-55 to 150 °C
Factory packaging
LARGE T&R
Package quantity
3,000 pieces
Interface
I2C / SMBus
Temperature result
16 bits
Temperature resolution
0.0078 °C/LSB
Source: Texas Instruments product data · Reviewed 2026-09-29
ORDER-CODE COMPARISON

Same series, different order codes.

TMP117 is available in the following manufacturer order codes. They share the same TMP117 design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
TMP117AIDRVRWSON-6——
TMP117AIYBGRDSBGA-6LARGE T&RPackage/pins: DSBGA (YBG), 6 pins; TMP117AIDRVR is WSON (DRV), 6 pins; do not assume direct replacement — verify PCB pads, thermal and pinoutt.
TMP117MAIDRVRWSON-6LARGE T&RGrade M rated 0–85 °C; on-site Grade A is -55–150 °C — verify accuracy conditions per grade against the manufacturer datasheet; same WSON-6 package as TMP117AIDRVR; this difference alone does not require PCB pad changes; rated operating temperature changes from -55 to 150 °C to 0 to 85 °C — verify the temperature grade.
TMP117MAIYBGRDSBGA-6LARGE T&RGrade M rated 0–85 °C; on-site Grade A is -55–150 °C — verify accuracy conditions per grade against the manufacturer datasheet; package/pins: DSBGA (YBG), 6 pins; TMP117AIDRVR is WSON (DRV), 6 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; rated operating temperature changes from -55 to 150 °C to 0 to 85 °C — verify the temperature grade.
TMP117NAIYBGRDSBGA-6LARGE T&RGrade N and the on-site Grade A are different orderable grades; the manufacturer datasheet lists accuracy conditions separately — do not assume full equivalence from the same temperature range alone; package/pins: DSBGA (YBG), 6 pins; TMP117AIDRVR is WSON (DRV), 6 pins; do not assume direct replacement — verify PCB pads, thermal and pinout.
SELECTION GUIDANCE

TMP117AIYBGR selection guidance

TMP117AIYBGR is a TMP117 from Texas Instruments, orderable in the DSBGA-6 package. The ordering code fixes the exact configuration you receive — package, grade and packing — so procurement starts with matching this code character-for-character against your BOM, not just the base series name.

Within the same series, also consider: TMP117AIDRVR — package WSON-6 · TMP117MAIDRVR — package WSON-6; packing LARGE T&R; Grade M rated 0–85 °C; on-site Grade A is -55–150 °C — verify accuracy conditions per grade against the manufacturer datasheet; same WSON-6 package as TMP117AIDRVR; this difference alone does not require PCB pad changes; rated operating temperature changes from -55 to 150 °C to 0 to 85 °C — verify the temperature grade. · TMP117MAIYBGR — packing LARGE T&R; Grade M rated 0–85 °C; on-site Grade A is -55–150 °C — verify accuracy conditions per grade against the manufacturer datasheet; package/pins: DSBGA (YBG), 6 pins; TMP117AIDRVR is WSON (DRV), 6 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; rated operating temperature changes from -55 to 150 °C to 0 to 85 °C — verify the temperature grade. · TMP117NAIYBGR — packing LARGE T&R; Grade N and the on-site Grade A are different orderable grades; the manufacturer datasheet lists accuracy conditions separately — do not assume full equivalence from the same temperature range alone; package/pins: DSBGA (YBG), 6 pins; TMP117AIDRVR is WSON (DRV), 6 pins; do not assume direct replacement — verify PCB pads, thermal and pinout.. These variants share the core design; pick the code whose package and packing match your assembly process and reel requirements. If your BOM lists one of these instead of TMP117AIYBGR, do not substitute without checking the exact ordering code — even one suffix character can change the device you receive.

When you request a quote, include the full ordering code, the target packing format (reel, tube, tray or cut tape), your quantity and any date-code or lot requirements. We reconfirm manufacturer, suffix, package, date code and traceability against the actual offered lot before any commercial quote is issued, and every RFQ gets a reply within 24 hours.

QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Sensors records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

TMP117MAIYBGRTexas InstrumentsTMP117 · DSBGA-6

Texas Instruments lists TMP117MAIYBGR as an M-grade digital temperature sensor in DSBGA-6 — for I2C temperature-monitoring designs where board space is critical. The DSBGA chip-scale package is the selection point: the smallest TMP117 footprint for dense layouts, trading assembly ease for size. Selection advice: the MAIYBGR suffix denotes the M accuracy grade in DSBGA-6 on tape and reel — match the full code, since the family spans DSBGA and WSON packages with M and N grades. For easier soldering, the WSON-6 MAIDRVR is the alternative in the same grade. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TMP117NAIYBGRTexas InstrumentsTMP117 · DSBGA-6

Texas Instruments lists TMP117NAIYBGR as an N-grade digital temperature sensor in DSBGA-6 — for I2C temperature-monitoring designs where the M grade accuracy is more than needed. The N grade is the selection point: the cost-optimized TMP117 for applications that accept looser tolerance in the same tiny DSBGA-6 footprint. Selection advice: the NAIYBGR suffix denotes the N accuracy grade in DSBGA-6 on tape and reel — match the full code, and confirm your accuracy requirements against the datasheet before choosing N over M. For the tighter tolerance, specify the M-grade MAIYBGR instead. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TMP117MAIDRVRTexas InstrumentsTMP117 · WSON-6

Texas Instruments lists TMP117MAIDRVR as an M-grade digital temperature sensor in WSON-6 — for I2C temperature-monitoring designs that need a solderable package with high accuracy. The WSON-6 package is the selection point within the TMP117 family: easier assembly and inspection than the DSBGA chip-scale variant, at the cost of board space. Selection advice: the MAIDRVR suffix denotes the M accuracy grade in WSON-6 on tape and reel — match the full code, since the TMP117 ships in DSBGA and WSON with multiple grades. Confirm your accuracy needs against the datasheet; the N grade is the looser-tolerance alternative. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LM35DZ/NOPBTexas InstrumentsAnalog temperature sensor · TO-92-3

TI lists LM35DZ/NOPB as Active (In Stock) — a 10 mV/°C linear analog temperature sensor, 0 to +100 °C, in a TO-92 3-pin package. The linear 10 mV/°C output is the selection point: temperature reads directly with a voltmeter or ADC, no lookup tables or linearization math. Selection advice: the /NOPB suffix denotes the lead-free orderable code — the bare LM35DZ code is superseded, so specify LM35DZ/NOPB for new orders. For new digital designs, compare against I2C digital sensors; for simple analog monitoring and repairs, match this code exactly. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

OPT3001Texas InstrumentsAmbient light sensor · USON-6

OPT3001 is a Texas Instruments digital ambient light sensor in 2x2mm USON-6 — for display backlight control, lighting systems and human-centric IoT where the light reading must match human perception: 0.01 lux to 83k lux measurement with 23-bit effective dynamic range via automatic gain ranging, precision optical filtering that rejects >99% of IR, and 1.8µA typical operating current. I2C/SMBus interface with autonomous interrupt operation lets the host MCU sleep while the sensor watches for light-level events. Selection advice: the human-eye-matched spectral response is the differentiator over discrete photodiodes — for higher speed and precision, the OPT4001 on this site is the upgrade path; the USON package suits space-constrained designs but needs careful reflow profiling. Confirm the I2C address option against your bus layout. Parameters verified against TI documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

OPT3001DNPRTexas InstrumentsAmbient light sensor · USON-6

OPT3001DNPR is a digital ambient light sensor from Texas Instruments in a USON-6 package, with human-eye spectral response — for display backlight control, lighting systems and optical switching. The human-eye-matched spectral response is the selection point: it measures what people actually perceive, so display dimming tracks real viewing conditions instead of raw lux. Selection advice: the DNPR suffix denotes USON-6 on tape and reel — match the full OPT3001DNPR code to your footprint. Confirm your lux range and interrupt needs against the datasheet. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

OPT4001Texas InstrumentsAmbient light sensor · SOT-5X3

OPT4001 is a Texas Instruments high-speed, high-precision digital ambient light sensor — for display backlight control and human-presence lighting where the sensor must see what the human eye sees: precision optical filtering matches the photopic response with strong near-infrared rejection, so readings stay accurate behind dark cover glass. Semi-logarithmic output with automatic full-scale selection covers 312.5 µlux to 83 klux (PicoStar) without host gain management, and 12 conversion times from 600 µs to 800 ms trade speed against resolution. Selection advice: two packages exist — the SOT-5X3 (DTS) with interrupt pin for hardware wake-up, and the smaller PicoStar (YMN) without it; pick DTS when the host needs threshold interrupts, YMN for minimum footprint. This is the upgrade path from the OPT3001 — for new designs prefer the 4001 for its wider dynamic range. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TMAG5170Texas Instruments3D Hall-effect sensor · VSSOP-8

TMAG5170 is a Texas Instruments high-precision linear 3D Hall-effect sensor — for contactless position sensing in industrial and automotive designs: three independent Hall elements on X, Y and Z axes with a 12-bit ADC delivering 20 ksps, ±2.6% max linear error and an integrated CORDIC engine for full 360-degree angle calculation. On-chip temperature sensing enables system-level drift compensation, and SPI with CRC plus diagnostics suit safety-related designs. Selection advice: two field-range variants exist — the A1 (±25/±50/±100 mT) for close-range precision, the A2 (±75/±150/±300 mT) for larger air gaps; pick the range before magnet selection, not after. For I2C instead of SPI, the TMAG5173 is the sibling. The -40 to +150C range covers under-hood use — for full automotive qualification specify the TMAG5170-Q1. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TMP117AIDRVRTexas InstrumentsDigital temperature sensor · WSON-6

TMP117AIDRVR is a high-accuracy digital temperature sensor from Texas Instruments in a 6-pin WSON package, with an I2C interface — for precision thermal monitoring in medical, industrial and test equipment. High accuracy without calibration is the selection point: where an NTC thermistor needs per-unit calibration, the TMP117 delivers calibrated digital readings out of the box, removing a production step. Selection advice: the DRVR suffix denotes the WSON-6 package on tape and reel — match the full code to your layout. Confirm your accuracy requirement against the datasheet before paying for precision you do not need; for coarse monitoring a cheaper sensor suffices. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ACS37002LMABTR-050B5Allegro MicroSystemsHall-effect current sensor · SOIC-16

ACS37002LMABTR-050B5 is an isolated Hall-effect current sensor from Allegro MicroSystems in a 16-pin SOIC package, with a 50 A measurement range on tape and reel — for high-current motor drives, solar inverters and industrial power. The 50 A range in a standard SOIC-16 is the selection point: high-current isolated sensing without a bulky module or external shunt. Selection advice: the 050B5 code denotes the 50 A bidirectional variant — the ACS37002 ships in multiple ranges that are not interchangeable, so match the full ACS37002LMABTR-050B5 code. Confirm your current range, bandwidth and isolation requirements against the datasheet. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Browse all Sensors records Read the alternative review checklist
COMMON QUESTIONS

TMP117AIYBGR FAQ

What is the difference between TMP117AIYBGR and TMP117AIDRVR, TMP117MAIDRVR, TMP117MAIYBGR?

These are order-code variants of the same Texas Instruments series. They share the core design; the ordering code selects the exact configuration — TMP117AIDRVR (WSON-6); TMP117MAIDRVR: Grade M rated 0–85 °C; on-site Grade A is -55–150 °C — verify accuracy conditions per grade against the manufacturer datasheet; same WSON-6 package as TMP117AIDRVR; this difference alone does not require PCB pad changes; rated operating temperature changes from -55 to 150 °C to 0 to 85 °C — verify the temperature grade.; TMP117MAIYBGR: Grade M rated 0–85 °C; on-site Grade A is -55–150 °C — verify accuracy conditions per grade against the manufacturer datasheet; package/pins: DSBGA (YBG), 6 pins; TMP117AIDRVR is WSON (DRV), 6 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; rated operating temperature changes from -55 to 150 °C to 0 to 85 °C — verify the temperature grade.. TMP117AIYBGR itself is the DSBGA-6 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What is the difference between package and packing for TMP117AIYBGR?

The package (DSBGA-6) is the physical form of the device itself. Packing describes how the devices are delivered — reel, tube, tray or cut tape. The same ordering code can ship in different packing formats depending on the lot, so confirm the required packing format when you submit your RFQ.

Can you provide traceability documents for TMP117AIYBGR?

Traceability evidence — lot and date-code information, labels and photos — is confirmed per lot at quotation time, because it depends on the actual lot offered. Tell us which documents your receiving inspection requires when you submit the RFQ, and we will confirm what can be provided for the offered lot.

How do I request a quotation for TMP117AIYBGR?

Add TMP117AIYBGR to your RFQ with the complete ordering code, the manufacturer (Texas Instruments), your quantity, the target packing format and any date-code requirements. We reply to every RFQ within 24 hours.