100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsPower ManagementLM317DCYR
PACKAGE REFERENCESOT-223-4Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

LM317DCYR

Texas Instruments

LM317DCYR is a Texas Instruments LM317 adjustable positive linear regulator — 1.25 to 37 V output set by two external resistors, 1.5 A maximum, in the 4-pin SOT-223 surface-mount package (DCY), tape-and-reel packing of 2500, operating 0 to +125 °C. It is the same die as the tube-packed LM317DCY; the R suffix is the selection point for procurement: reel packing for automated SMT lines and volume builds, with a 2500-piece reel that sets the practical MOQ. Selection advice: choose this code when the board goes to pick-and-place — tube parts slow the line — and keep LM317DCY on prototype and rework BOMs only. Electrically the same cautions apply as the tube version: internal current limit, thermal and safe-area protection, but about 2 V of dropout, so it is not a low-dropout regulator and cannot make 3.3 V from a 5 V rail at full load the way an LD1086 can; and the SOT-223 thermal path caps real continuous current well below the 1.5 A headline at large input-output differentials. Evidence: TI LM317 datasheet and package addendum confirm 1.25-37 V, 1.5 A, SOT-223 DCY, reel 2500.

Power ManagementAdjustable linear regulatorSOT-223-4
MPN
LM317DCYR
Manufacturer
Texas Instruments
Family
Adjustable linear regulator
Package
SOT-223-4
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
Lifecycle
Active
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Regulator type
Adjustable positive linear regulator
Input voltage
Up to 40 V
Adjustable output
1.25 V to 37 V
Maximum output current
1.5 A
Protection
Current limit and thermal overload
Package
SOT-223-4
Source: Texas Instruments product data · Reviewed 2026-09-29
ORDER-CODE COMPARISON

Same series, different order codes.

LM317 is available in the following manufacturer order codes. They share the same Adjustable linear regulator design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
LM317DCYSOT-223-4TubeSOT-223, tube
LM317DCYRSOT-223-4Tape and reelSOT-223, tape and reel
LM317KTTRTO-263-3LARGE T&RPackage/pins: TO-263 (KTT), 3 pins; LM317DCY is SOT-223 (DCY), 4 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 500 per pack; LM317DCY is TUBE, 80 per pack.
LM317T/NOPBTO-220-3—TO-220 through-hole package
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Power Management records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

MARKET INSIGHTS

Procurement coverage for LM317DCYR

In-depth buyer guides on the market forces affecting this part category — allocation, mergers and technology shifts.

COMMON QUESTIONS

LM317DCYR FAQ

What is the difference between LM317DCYR and LM317DCY, LM317KTTR, LM317T/NOPB?

These are order-code variants of the same Texas Instruments series. They share the core design; the ordering code selects the exact configuration — LM317DCY: SOT-223, tube; LM317KTTR: Package/pins: TO-263 (KTT), 3 pins; LM317DCY is SOT-223 (DCY), 4 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 500 per pack; LM317DCY is TUBE, 80 per pack.; LM317T/NOPB: TO-220 through-hole package. LM317DCYR itself is the SOT-223-4 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What are the key specifications of LM317DCYR?

From the verified technical profile: Regulator type: Adjustable positive linear regulator; Input voltage: Up to 40 V; Adjustable output: 1.25 V to 37 V. These are the catalog-recorded values for LM317DCYR — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.