100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsIntegrated CircuitsATMEGA2560-16AU
PACKAGE REFERENCETQFP-100Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

ATMEGA2560-16AU

Microchip Technology

ATMEGA2560-16AU is a high-pin-count 8-bit AVR microcontroller from Microchip Technology with 256 KB Flash in a 100-pin TQFP package — for I/O-heavy embedded control. The 256 KB Flash with 100-pin I/O is the selection point: the largest AVR 8-bit device, the chip behind the Arduino Mega, for designs that outgrew smaller AVRs but want to stay in the 8-bit ecosystem. Selection advice: the 16AU suffix denotes the 16 MHz speed grade in TQFP-100 — match the full code to your layout and clock requirements. If your firmware fits in 128 KB, the ATMEGA1280 is the cheaper drop-in alternative in the same package.

Integrated Circuits8-bit microcontrollerTQFP-100
MPN
ATMEGA2560-16AU
Manufacturer
Microchip Technology
Family
8-bit microcontroller
Package
TQFP-100
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

CPU architecture
8-bit AVR RISC
Maximum frequency
16 MHz — the 16 speed grade, valid only at VCC 4.5 V to 5.5 V (§31.2 / Figure 31-4; §35.4); the family safe-operating-area curve derates speed at lower rails
Supply for this orderable
4.5 V to 5.5 V at the 16 MHz grade (§35.4)
I/O and ADC
86 general-purpose I/O lines; 16-channel 10-bit ADC (Table 2-1, 100-pin device)
Temperature grade
Industrial, −40 °C to +85 °C — the U code (§35.4)
Memory endurance
10,000 Flash / 100,000 EEPROM write-erase cycles; data retention 20 years at 85 °C / 100 years at 25 °C (Features)
Absolute maximum ratings
Voltage on any pin except RESET −0.5 V to VCC + 0.5 V; on RESET −0.5 V to +13.0 V; maximum operating voltage 6.0 V; DC current per I/O pin 40 mA (§31)
Packing
The unsuffixed orderable is the standard packing form; the R-suffix variant (ATMEGA2560-16AUR) is tape & reel — the datasheet states no packing quantity for either form (§35.4)
Flash memory
256 KB
SRAM / EEPROM
8 KB / 4 KB
Key interfaces
4 USARTs, SPI and I2C
Package
TQFP-100 — the A code = 100-lead TQFP, 14 × 14 mm body (§36.1)
Source: Microchip ATmega640/1280/2560 family datasheet DS40002211A + §35.4 ordering table · Reviewed 2026-09-21
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Integrated Circuits records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

MARKET INSIGHTS

Procurement coverage for ATMEGA2560-16AU

In-depth buyer guides on the market forces affecting this part category — allocation, mergers and technology shifts.

COMMON QUESTIONS

ATMEGA2560-16AU FAQ

What are the key specifications of ATMEGA2560-16AU?

From the verified technical profile: CPU architecture: 8-bit AVR RISC; Maximum frequency: 16 MHz — the 16 speed grade, valid only at VCC 4.5 V to 5.5 V (§31.2 / Figure 31-4; §35.4); the family safe-operating-area curve derates speed at lower rails; Supply for this orderable: 4.5 V to 5.5 V at the 16 MHz grade (§35.4). These are the catalog-recorded values for ATMEGA2560-16AU — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.