100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsSensorsACS712ELCTR-05B-T
PACKAGE REFERENCESOIC-8Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

ACS712ELCTR-05B-T

Allegro MicroSystems

ACS712ELCTR-05B-T is an Allegro MicroSystems fully integrated Hall-effect linear current sensor IC in SOIC-8 (LC package), supplied on tape and reel — for bidirectional AC and DC current sensing in motor control, load detection and management, switched-mode power supplies and overcurrent fault protection. The sensed current flows through an internal copper conductor, so the measurement is isolated from the signal pins by the package insulation system. The isolation rating is given in the current data sheet (ACS712-DS Rev. 22) and in the parameter table. Selection advice: the -05B code is the ±5 A sensing range — the smallest of the family — and sets the sensitivity — the -20A and -30A siblings are different ranges, not equivalents; the bandwidth is set via the FILTER pin, and the conditioned sensitivity, error and isolation rows are in the parameter table. Parameters verified against Allegro MicroSystems documentation (ACS712-DS Rev. 22).

SensorsHall-effect current sensorSOIC-8
MPN
ACS712ELCTR-05B-T
Manufacturer
Allegro MicroSystems
Family
Hall-effect current sensor
Package
SOIC-8
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function
Hall-effect linear current sensor with integrated conductor · SOIC-8 (LC)
Sensed current (x05B)
−5 A to +5 A primary range (x05B electrical table)
Sensitivity
185 mV/A typical at 25°C
Sensitivity spread
180 mV/A minimum / 190 mV/A maximum over the full range at TA = 25 °C (x05B table)
Total output error
±1.5 % typical at IP = ±5 A, TA = 25 °C, output filtered (x05B table)
Supply voltage
4.5 V minimum / 5.0 V typical / 5.5 V maximum; supply current 10 mA typical / 13 mA maximum with output open (Common Operating Characteristics)
Primary conductor resistance
1.2 mΩ typical at TA = 25 °C (Common Operating Characteristics)
Bandwidth
80 kHz typical (−3 dB, TA = 25 °C, IP = 10 A peak-to-peak); rise time 3.5 µs typical (Common Operating Characteristics)
Isolation
2400 VRMS minimum dielectric strength (UL 62368-1, 60 s agency rating; 100 % production tested 1 s); working voltage for basic isolation 420 VPK / VDC, 297 VRMS; clearance and creepage 4 mm (Isolation Characteristics)
Operating temperature
Range E: −40 °C to 85 °C ambient (Absolute Maximum Ratings)
Absolute maximum — supply / output
VCC 8 V; VIOUT 8 V; transient primary current 100 A (single 100 ms pulse) (Absolute Maximum Ratings)
Order code
ACS712ELCTR-05B-T — LC SOIC-8, tape and reel; the -T construction is lead (Pb) contained with the same performance as -S (Selection Guide)
Manufacturer packing
3000 pieces per reel (Selection Guide)
Source: Allegro ACS712 Data Sheet ACS712-DS Rev. 22 (Feb 2024) · Common Operating Characteristics, x05B Electrical Characteristics, Isolation Characteristics, Absolute Maximum Ratings, Selection Guide · Reviewed 2026-10-30
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Sensors records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

ACS712ELCTR-05B-T FAQ

What are the key specifications of ACS712ELCTR-05B-T?

From the verified technical profile: Function: Hall-effect linear current sensor with integrated conductor · SOIC-8 (LC); Sensed current (x05B): −5 A to +5 A primary range (x05B electrical table); Sensitivity: 185 mV/A typical at 25°C. These are the catalog-recorded values for ACS712ELCTR-05B-T — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.