100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsPower ManagementTPS7B6950QDBVRQ1
PACKAGE REFERENCESOT-23-5Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

TPS7B6950QDBVRQ1

Texas Instruments

TPS7B6950QDBVRQ1 is a Texas Instruments automotive 5 V fixed LDO regulator, 150 mA output, up to 40 V input, AEC-Q100 qualified, in SOT-23-5 — the off-battery 5 V rail for automotive MCUs, CAN transceivers and sensors. The AEC-Q100 qualification with -40 to +150 °C junction temperature is the selection point: it survives load-dump-adjacent transients and under-hood heat that disqualify catalog-grade LDOs. Selection advice: dropout is 0.8 V maximum at 100 mA, so the input must stay above roughly 5.8 V at full load — verify cranking-profile compatibility if this feeds from the battery rail directly. The 25 µA quiescent current suits always-on keep-alive rails; for higher-current 5 V rails compare the TPS7B69xx higher-current siblings rather than paralleling. The DBV suffix is the SOT-23-5 package, R = tape and reel. Parameters verified against the TI TPS7B69-Q1 datasheet and DigiKey listings.

Power ManagementLDO regulatorSOT-23-5
MPN
TPS7B6950QDBVRQ1
Manufacturer
Texas Instruments
Family
LDO regulator
Package
SOT-23-5
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function
High-voltage ultra-low-IQ low-dropout linear regulator
Fixed output voltage
5 V (50 = 5.0 V)
Input voltage range
5.5 V to 40 V (5 V version), withstands 45 V transients
Maximum output current
150 mA
Quiescent current
15 µA typical at light loads
Dropout voltage
450 mV typical at 100 mA
Package
SOT-23 5-pin (DBV); R = large tape and reel
Qualification
AEC-Q100 Grade 1 (-40°C to 125°C ambient)
Source: Texas Instruments product data · Reviewed 2026-09-28
ORDER-CODE COMPARISON

Same series, different order codes.

TPS7B69-Q1 is available in the following manufacturer order codes. They share the same LDO regulator design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
TPS7B6925QDBVRQ1SOT-23-5LARGE T&ROutput option is 2.5 V, while TPS7B6950QDBVRQ1 is 5 V; output circuit requires re-verification; same SOT-23-5 package as TPS7B6950QDBVRQ1; this difference alone does not require PCB pad changes.
TPS7B6925QDCYRQ1SOT-223-4LARGE T&ROutput option is 2.5 V, while TPS7B6950QDBVRQ1 is 5 V; output circuit requires re-verification; package/pins: SOT-223 (DCY), 4 pins; TPS7B6950QDBVRQ1 is SOT-23 (DBV), 5 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 2,500 per pack; TPS7B6950QDBVRQ1 is LARGE T&R, 3,000 per pack.
TPS7B6933QDBVRQ1SOT-23-5LARGE T&ROutput option is 3.3 V, while TPS7B6950QDBVRQ1 is 5 V; output circuit requires re-verification; same SOT-23-5 package as TPS7B6950QDBVRQ1; this difference alone does not require PCB pad changes.
TPS7B6933QDCYRQ1SOT-223-4LARGE T&ROutput option is 3.3 V, while TPS7B6950QDBVRQ1 is 5 V; output circuit requires re-verification; package/pins: SOT-223 (DCY), 4 pins; TPS7B6950QDBVRQ1 is SOT-23 (DBV), 5 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 2,500 per pack; TPS7B6950QDBVRQ1 is LARGE T&R, 3,000 per pack.
TPS7B6950QDBVRQ1SOT-23-5——
TPS7B6950QDCYRQ1SOT-223-4LARGE T&RPackage/pins: SOT-223 (DCY), 4 pins; TPS7B6950QDBVRQ1 is SOT-23 (DBV), 5 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 2,500 per pack; TPS7B6950QDBVRQ1 is LARGE T&R, 3,000 per pack.
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Power Management records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

MARKET INSIGHTS

Procurement coverage for TPS7B6950QDBVRQ1

In-depth buyer guides on the market forces affecting this part category — allocation, mergers and technology shifts.

COMMON QUESTIONS

TPS7B6950QDBVRQ1 FAQ

What is the difference between TPS7B6950QDBVRQ1 and TPS7B6925QDBVRQ1, TPS7B6925QDCYRQ1, TPS7B6933QDBVRQ1?

These are order-code variants of the same Texas Instruments series. They share the core design; the ordering code selects the exact configuration — TPS7B6925QDBVRQ1: Output option is 2.5 V, while TPS7B6950QDBVRQ1 is 5 V; output circuit requires re-verification; same SOT-23-5 package as TPS7B6950QDBVRQ1; this difference alone does not require PCB pad changes.; TPS7B6925QDCYRQ1: Output option is 2.5 V, while TPS7B6950QDBVRQ1 is 5 V; output circuit requires re-verification; package/pins: SOT-223 (DCY), 4 pins; TPS7B6950QDBVRQ1 is SOT-23 (DBV), 5 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 2,500 per pack; TPS7B6950QDBVRQ1 is LARGE T&R, 3,000 per pack.; TPS7B6933QDBVRQ1: Output option is 3.3 V, while TPS7B6950QDBVRQ1 is 5 V; output circuit requires re-verification; same SOT-23-5 package as TPS7B6950QDBVRQ1; this difference alone does not require PCB pad changes.. TPS7B6950QDBVRQ1 itself is the SOT-23-5 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

Is TPS7B6950QDBVRQ1 automotive-qualified?

The TPS7B6950QDBVRQ1 ordering code carries the manufacturer's automotive qualification marker. Qualification grade, temperature range and PPAP documentation depend on the exact lot offered, so state your automotive documentation requirements (PPAP level, AEC test reports) in the RFQ and we will confirm them against the offered lot before quotation.

What are the key specifications of TPS7B6950QDBVRQ1?

From the verified technical profile: Function: High-voltage ultra-low-IQ low-dropout linear regulator; Fixed output voltage: 5 V (50 = 5.0 V); Input voltage range: 5.5 V to 40 V (5 V version), withstands 45 V transients. These are the catalog-recorded values for TPS7B6950QDBVRQ1 — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.