100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsPower ManagementLT3045EDD#TRPBF
PACKAGE REFERENCEDFN-10Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

LT3045EDD#TRPBF

Analog Devices

LT3045EDD#TRPBF is an Analog Devices ultralow-noise, ultrahigh-PSRR linear regulator in a 3 x 3 mm 10-lead DFN package, tape and reel — for noise-critical RF and precision-analog rails, in the same role as the LT3042 at a higher current class. Its current-reference architecture holds noise, PSRR and bandwidth nearly constant across the programmable output range (set by one resistor), and devices parallel directly for higher current or lower noise. ADI lists the LT3045 as recommended for new designs. Selection advice: the EDD code is the 10-lead DFN — the smallest footprint option; choose the EMSE (12-lead MSOP) variant for easier inspection and rework. Against the LT3042 on this site — same architecture and noise class — pick the LT3045 only where the rail genuinely needs the extra current, since dropout dissipation grows with load; the conditioned noise, PSRR and dropout rows are in the parameter table. For negative rails, pair with the LT3094.

Power ManagementLDO regulatorDFN-10
MPN
LT3045EDD#TRPBF
Manufacturer
Analog Devices
Family
LDO regulator
Package
DFN-10
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
Lifecycle
RECOMMENDED FOR NEW DESIGNS (ADI product page)
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function
Ultralow-noise, ultrahigh-PSRR linear regulator with one-resistor output programming and direct paralleling · 10-lead DFN (DD), 3 mm × 3 mm
Input and output range
Input 2 V to 20 V (electrical table); output programmable 0 V to 15 V with VIN above VOUT (EC table)
SET pin current
100 µA typical (99 µA / 101 µA; 98 µA / 102 µA over full conditions) at VIN = 2 V, ILOAD = 1 mA, VOUT = 1.3 V (EC table)
Dropout voltage
260 mV typical / 350 mV maximum at ILOAD = 500 mA (450 mV maximum over full temperature); 220 mV typical / 275 mV maximum at ILOAD = 1 mA to 50 mA (EC table)
Output noise
0.8 µVRMS at ILOAD = 500 mA, BW = 10 Hz to 100 kHz, COUT = 10 µF, CSET = 4.7 µF; spot noise 2 nV/√Hz at 10 kHz with CSET = 0.47 µF (EC table)
Ripple rejection (PSRR)
117 dB at 120 Hz / 90 dB at 10 kHz / 77 dB at 100 kHz / 76 dB at 1 MHz / 53 dB at 10 MHz at ILOAD = 500 mA, VIN − VOUT = 2 V average (EC table)
Ground pin current
2.2 mA typical at ILOAD = 10 µA; 15 mA typical / 25 mA maximum at ILOAD = 500 mA (EC table)
Enable threshold
EN/UV rising 1.18 V minimum / 1.24 V typical / 1.32 V maximum, 130 mV typical hysteresis (EC table)
Absolute maximum ratings
IN and EN/UV pins ±22 V; SET, OUTS and OUT pins −0.3 V to 16 V; TJ for the E grade −40 °C to 125 °C; Tstg −65 °C to 150 °C (Note 1)
Package thermal data
DD package: TJMAX 150 °C, θJA 34 °C/W, θJC 5.5 °C/W; exposed pad (pin 11) is GND
Order code
LT3045EDD#TRPBF — tape-and-reel form of LT3045EDD#PBF (tube); part marking LGYP; E grade −40 °C to 125 °C
Source: ADI LT3045 Data Sheet Rev. D · Electrical Characteristics table, Absolute Maximum Ratings (Note 1), ordering information table · Reviewed 2026-10-30
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Power Management records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

MARKET INSIGHTS

Procurement coverage for LT3045EDD#TRPBF

In-depth buyer guides on the market forces affecting this part category — allocation, mergers and technology shifts.

COMMON QUESTIONS

LT3045EDD#TRPBF FAQ

What are the key specifications of LT3045EDD#TRPBF?

From the verified technical profile: Function: Ultralow-noise, ultrahigh-PSRR linear regulator with one-resistor output programming and direct paralleling · 10-lead DFN (DD), 3 mm × 3 mm; Input and output range: Input 2 V to 20 V (electrical table); output programmable 0 V to 15 V with VIN above VOUT (EC table); SET pin current: 100 µA typical (99 µA / 101 µA; 98 µA / 102 µA over full conditions) at VIN = 2 V, ILOAD = 1 mA, VOUT = 1.3 V (EC table). These are the catalog-recorded values for LT3045EDD#TRPBF — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.