MANUFACTURER PART RECORDTAJB336K016RNJ
AVXTAJB336K016RNJ is a Kyocera AVX 33 µF ±10% molded tantalum capacitor rated 16 V, case B (3528 metric / 1411), ESR 2.1 Ω, operating -55 to +125 °C — bulk capacitance for converter inputs/outputs and hold-up where an MLCC of the same value would be physically larger. The molded tantalum construction is the selection point: stable capacitance with voltage and temperature (no DC-bias derating like high-K MLCCs), at the cost of higher ESR and a hard polarity requirement. Selection advice: tantalum is polarized — verify PCB polarity marking and incoming-lot orientation, because reverse bias fails short. Derate the 16 V rating on the actual rail: keep it on 12 V-and-below rails with margin, and be cautious on very low-impedance supplies where inrush/surge current is the classic tantalum killer; for lower ESR or higher ripple current compare polymer tantalum or MLCC banks rather than swapping on capacitance and footprint alone. The RNJ code is a general-purpose commercial part, not an automotive-qualified one. Evidence: distributor listings (DigiKey/Micros/Anglia) confirm 33 µF, ±10%, 16 V, case B, 2.1 Ω ESR and Active status.
Passive ComponentsTantalum capacitor3528