100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsAnalog ICsTL072CDR
PACKAGE REFERENCESOIC-8Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

TL072CDR

Texas Instruments

TL072CDR is a dual low-noise JFET-input operational amplifier from Texas Instruments in an 8-pin SOIC package, for analog signal paths — audio preamps, active filters and sensor buffers. The JFET input stage is the selection-relevant advantage: very high input impedance and low input bias current, which suits high-impedance sources that would be loaded down by bipolar-input amplifiers. Selection advice: the CDR suffix denotes the commercial-grade SOIC-8 on tape and reel — the TL07x family spans single, dual and quad variants across grades and packages, so match the full TL072CDR code. For new low-noise designs, also evaluate current-production JFET or CMOS alternatives against your noise and bandwidth budget before committing.

Analog ICsJFET-input operational amplifierSOIC-8
MPN
TL072CDR
Manufacturer
Texas Instruments
Family
JFET-input operational amplifier
Package
SOIC-8
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
Lifecycle
Active
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Amplifier channels
2
Input stage
FET input
Gain bandwidth
3 MHz
Slew rate
13 V/µs
Supply span
Up to 30 V
Package
SOIC-8 tape and reel
Source: Texas Instruments product data · Reviewed 2026-09-21
ORDER-CODE COMPARISON

Same series, different order codes.

TL072 is available in the following manufacturer order codes. They share the same JFET-input operational amplifier design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
TL072CDRSOIC-8——
TL072CPPDIP-8TUBEPackage/pins: PDIP (P), 8 pins; TL072CDR is SOIC (D), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is TUBE, 50 per pack; TL072CDR is LARGE T&R, 2,500 per pack.
TL072CPWRTSSOP-8LARGE T&RPackage/pins: TSSOP (PW), 8 pins; TL072CDR is SOIC (D), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 2,000 per pack; TL072CDR is LARGE T&R, 2,500 per pack.
TL072IDRSOIC-8LARGE T&RSame SOIC-8 package as TL072CDR; this difference alone does not require PCB pad changes; rated operating temperature changes from 0 to 70 °C to -40 to 85 °C — verify the temperature grade.
TL072IPPDIP-8TUBEPackage/pins: PDIP (P), 8 pins; TL072CDR is SOIC (D), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; rated operating temperature changes from 0 to 70 °C to -40 to 85 °C — verify the temperature grade; factory packing is TUBE, 50 per pack; TL072CDR is LARGE T&R, 2,500 per pack.
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Analog ICs records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

TL072CDR FAQ

What is the difference between TL072CDR and TL072CP, TL072CPWR, TL072IDR?

These are order-code variants of the same Texas Instruments series. They share the core design; the ordering code selects the exact configuration — TL072CP: Package/pins: PDIP (P), 8 pins; TL072CDR is SOIC (D), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is TUBE, 50 per pack; TL072CDR is LARGE T&R, 2,500 per pack.; TL072CPWR: Package/pins: TSSOP (PW), 8 pins; TL072CDR is SOIC (D), 8 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is LARGE T&R, 2,000 per pack; TL072CDR is LARGE T&R, 2,500 per pack.; TL072IDR: Same SOIC-8 package as TL072CDR; this difference alone does not require PCB pad changes; rated operating temperature changes from 0 to 70 °C to -40 to 85 °C — verify the temperature grade.. TL072CDR itself is the SOIC-8 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What are the key specifications of TL072CDR?

From the verified technical profile: Amplifier channels: 2; Input stage: FET input; Gain bandwidth: 3 MHz. These are the catalog-recorded values for TL072CDR — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.