100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsPower ManagementLD1086DT50TR
PACKAGE REFERENCEDPAKConfirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

LD1086DT50TR

STMicroelectronics

LD1086DT50TR is an STMicroelectronics LD1086 fixed 5.0 V low-dropout linear regulator — 1.5 A, in DPAK (TO-252), tape-and-reel packing, input up to 30 V, operating -40 to +125 °C. The 1.3 V typical dropout at 1.5 A with ±1% tolerance is the selection point: a clean 5 V rail from inputs as low as about 6.3 V, where standard regulators need far more headroom. Selection advice: the DT (DPAK) package is the smaller thermal option versus the D2PAK sibling — at 1.5 A with a large input-output differential (for example 12 V down to 5 V, roughly 10 W to dissipate) a linear regulator in DPAK will hit thermal limit, so compute dissipation first and either drop the input voltage, move to the D2PAK code, or switch to a buck converter for high-drop, high-current rails. For 3.3 V output use the LD1086D2T33TR, not this 5.0 V code — fixed means fixed. Only 10 µF minimum output capacitance for stability, with internal current and thermal protection. Evidence: ST LD1086 datasheet and distributor listings confirm 5.0 V, 1.5 A, 1.3 V dropout, DPAK and tape-and-reel. Match the full LD1086DT50TR code.

Power ManagementFixed linear regulatorDPAK
MPN
LD1086DT50TR
Manufacturer
STMicroelectronics
Family
Fixed linear regulator
Package
DPAK
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
Lifecycle
Active
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Regulator type
Fixed positive LDO regulator
Output voltage
5.0 V fixed
Maximum output current
1.5 A
Typical dropout
1.3 V at 1.5 A
Output tolerance
±1% at 25°C, ±2% full range
Operating temperature
-40°C to 125°C
Package
DPAK
Source: STMicroelectronics estore · Reviewed 2026-09-29
ORDER-CODE COMPARISON

Same series, different order codes.

LD1086 is available in the following manufacturer order codes. They share the same Fixed linear regulator design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
LD1086BDTTRDPAK—Compared with LD1086DT33TR, this code specifies adjustable output and DPAK packaging. An adjustable version needs an external setting network; a package change requires footprint and thermal review.
LD1086BV-DGTO-220—Compared with LD1086DT33TR, this code specifies adjustable output and TO-220 packaging. An adjustable version needs an external setting network; a package change requires footprint and thermal review.
LD1086D2M33TRD2PAK—Compared with LD1086DT33TR, this code specifies 3.3 V output and D2PAK packaging. An adjustable version needs an external setting network; a package change requires footprint and thermal review.
LD1086D2MTRD2PAK—Compared with LD1086DT33TR, this code specifies adjustable output and D2PAK packaging. An adjustable version needs an external setting network; a package change requires footprint and thermal review.
LD1086D2T33TRD2PAKTape and reelFixed 3.3 V output
LD1086D2TTRD2PAK—Compared with LD1086DT33TR, this code specifies adjustable output and D2PAK packaging. An adjustable version needs an external setting network; a package change requires footprint and thermal review.
LD1086DT33TRTO-252——
LD1086DT50TRDPAKTape and reelFixed 5.0 V output
LD1086DTTRDPAK—Compared with LD1086DT33TR, this code specifies adjustable output and DPAK packaging. An adjustable version needs an external setting network; a package change requires footprint and thermal review.
LD1086PURDFN8 4x4—Compared with LD1086DT33TR, this code specifies adjustable output and DFN8 4x4 packaging. An adjustable version needs an external setting network; a package change requires footprint and thermal review.
LD1086V-DGTO-220—Compared with LD1086DT33TR, this code specifies adjustable output and TO-220 packaging. An adjustable version needs an external setting network; a package change requires footprint and thermal review.
LD1086V33-DGTO-220—Compared with LD1086DT33TR, this code specifies 3.3 V output and TO-220 packaging. An adjustable version needs an external setting network; a package change requires footprint and thermal review.
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Power Management records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

MARKET INSIGHTS

Procurement coverage for LD1086DT50TR

In-depth buyer guides on the market forces affecting this part category — allocation, mergers and technology shifts.

COMMON QUESTIONS

LD1086DT50TR FAQ

What is the difference between LD1086DT50TR and LD1086BDTTR, LD1086BV-DG, LD1086D2M33TR?

These are order-code variants of the same STMicroelectronics series. They share the core design; the ordering code selects the exact configuration — LD1086BDTTR: Compared with LD1086DT33TR, this code specifies adjustable output and DPAK packaging. An adjustable version needs an external setting network; a package change requires footprint and thermal review.; LD1086BV-DG: Compared with LD1086DT33TR, this code specifies adjustable output and TO-220 packaging. An adjustable version needs an external setting network; a package change requires footprint and thermal review.; LD1086D2M33TR: Compared with LD1086DT33TR, this code specifies 3.3 V output and D2PAK packaging. An adjustable version needs an external setting network; a package change requires footprint and thermal review.. LD1086DT50TR itself is the DPAK configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What are the key specifications of LD1086DT50TR?

From the verified technical profile: Regulator type: Fixed positive LDO regulator; Output voltage: 5.0 V fixed; Maximum output current: 1.5 A. These are the catalog-recorded values for LD1086DT50TR — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.