100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsPower ManagementTPS54620RGYR
PACKAGE REFERENCEVQFN-14Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

TPS54620RGYR

Texas Instruments

TPS54620RGYR is a Texas Instruments synchronous buck converter with integrated MOSFETs in VQFN-14, on tape and reel — for point-of-load power in networking, industrial and FPGA rails, with an adjustable switching frequency, external-clock synchronization, Power Good and soft-start tracking for rail sequencing. Selection advice: the RGYR suffix denotes the 14-pin VQFN in tape and reel — for a smaller current class in SOT-23-6, the TPS54202DDCR on this site is the smaller counterpart. TI lists the orderable as Active in its package option addendum; the electrical rows, including the MOSFET on-resistances at their stated gate-drive conditions, are in the parameter table. Parameters verified against Texas Instruments documentation (SLVS949F).

Power ManagementBuck converterVQFN-14
MPN
TPS54620RGYR
Manufacturer
Texas Instruments
Family
Buck converter
Package
VQFN-14
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
Lifecycle
Active
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function
Synchronous buck (SWIFT) converter with integrated MOSFETs · VQFN-14 (RGY)
Input voltage
VIN 4.5 V to 17 V; PVIN 1.6 V to 17 V on the split power rail (§6.5); Absolute maximum −0.3 V to 20 V (§6.1)
Output current
0 A to 6 A continuous (§6.3, §6.5)
Output voltage reference
0.792 V minimum / 0.8 V typical / 0.808 V maximum over 0 A to 6 A (§6.5)
High-side MOSFET on-resistance
26 mΩ typical / 40 mΩ maximum at BOOT−PH = 6 V; 32 mΩ typical / 60 mΩ maximum at BOOT−PH = 3 V (§6.5)
Low-side MOSFET on-resistance
19 mΩ typical / 30 mΩ maximum at VIN = 12 V (§6.5)
Current limit
High-side 8 A minimum / 11 A typical; low-side sourcing 7 A minimum / 10 A typical (§6.5)
Switching frequency
Set by RT resistor: 480 kHz typical at Rrt = 100 kΩ (400 kHz minimum / 560 kHz maximum); 200 kHz typical at 240 kΩ; 1600 kHz typical at 29 kΩ (§6.5)
Quiescent and shutdown current
600 µA typical / 800 µA maximum operating (VSENSE = 810 mV); 2 µA typical / 5 µA maximum shutdown (EN = 0 V) (§6.5)
Thermal shutdown
160 °C minimum / 175 °C typical, 10 °C typical hysteresis (§6.5)
Thermal resistance
RθJA (RGY) 40.1 °C/W (§6.4)
Order-code package
VQFN (RGY), 14 pins, 3.5 mm × 3.5 mm · device marking 54620
Manufacturer packing
3000 pieces, large tape and reel; MSL Level-2 (Package Option Addendum)
Source: TI TPS54620 Data Sheet SLVS949F (May 2009 – Rev. May 2017) · §6.1 Absolute Maximum Ratings, §6.5 Electrical Characteristics, Package Option Addendum (orderable listed Active, Nov 2025) · Reviewed 2026-10-30
ORDER-CODE COMPARISON

Same series, different order codes.

TPS54620 is available in the following manufacturer order codes. They share the same Buck converter design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
TPS54620RGYRVQFN-14——
TPS54620RGYTVQFN-14SMALL T&RSame VQFN-14 package as TPS54620RGYR; this difference alone does not require PCB pad changes; factory packing is SMALL T&R, 250 per pack; TPS54620RGYR is LARGE T&R, 3,000 per pack.
TPS54620RHLRVQFN-14LARGE T&RPackage/pins: VQFN (RHL), 14 pins; TPS54620RGYR is VQFN (RGY), 14 pins; do not assume direct replacement — verify PCB pads, thermal and pinoutt.
TPS54620RHLTVQFN-14SMALL T&RPackage/pins: VQFN (RHL), 14 pins; TPS54620RGYR is VQFN (RGY), 14 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is SMALL T&R, 250 per pack; TPS54620RGYR is LARGE T&R, 3,000 per pack.
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Power Management records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

TPS54620RGYR FAQ

What is the difference between TPS54620RGYR and TPS54620RGYT, TPS54620RHLR, TPS54620RHLT?

These are order-code variants of the same Texas Instruments series. They share the core design; the ordering code selects the exact configuration — TPS54620RGYT: Same VQFN-14 package as TPS54620RGYR; this difference alone does not require PCB pad changes; factory packing is SMALL T&R, 250 per pack; TPS54620RGYR is LARGE T&R, 3,000 per pack.; TPS54620RHLR: Package/pins: VQFN (RHL), 14 pins; TPS54620RGYR is VQFN (RGY), 14 pins; do not assume direct replacement — verify PCB pads, thermal and pinoutt.; TPS54620RHLT: Package/pins: VQFN (RHL), 14 pins; TPS54620RGYR is VQFN (RGY), 14 pins; do not assume direct replacement — verify PCB pads, thermal and pinout; factory packing is SMALL T&R, 250 per pack; TPS54620RGYR is LARGE T&R, 3,000 per pack.. TPS54620RGYR itself is the VQFN-14 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What are the key specifications of TPS54620RGYR?

From the verified technical profile: Function: Synchronous buck (SWIFT) converter with integrated MOSFETs · VQFN-14 (RGY); Input voltage: VIN 4.5 V to 17 V; PVIN 1.6 V to 17 V on the split power rail (§6.5); Absolute maximum −0.3 V to 20 V (§6.1); Output current: 0 A to 6 A continuous (§6.3, §6.5). These are the catalog-recorded values for TPS54620RGYR — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.