HTS221TR

LIS2DH12TR is an ultra-low-power digital three-axis accelerometer from STMicroelectronics in an LGA-12 package — for motion sensing in battery-powered devices. The sub-microamp power-down current with motion-wake interrupts is the selection point: long operation on a coin cell for asset trackers and activity monitors. Selection advice: the TR suffix denotes tape and reel — match the full LIS2DH12TR code for production orders. This is a mature, proven part: confirm your full-scale range and data-rate needs against the datasheet. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LIS3DHTR is an ultra-low-power digital three-axis accelerometer from STMicroelectronics in an LGA-16 package — for motion detection, screen rotation and vibration monitoring in battery-powered devices. The ultra-low-power design with built-in motion-detection interrupts is the selection point: it wakes the host only on real events, which is how wearables and asset trackers stretch battery life. Selection advice: the TR suffix denotes tape and reel — match the full LIS3DHTR code for production orders. Confirm your full-scale range (±2/±4/±8/±16 g) and output data rate needs against the datasheet. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LPS22DFTR is an STMicroelectronics ultra-compact absolute pressure sensor — for barometric altimetry and weather monitoring in space-constrained designs: piezoresistive sensing element with digital output over I2C, SPI or MIPI I3C, in a holed HLGA package guaranteed from -40 to +85C. Lower power and lower pressure noise than its predecessor suit always-on environmental sensing in wearables, drones and IoT nodes. Selection advice: the DF is the newer generation over the LPS22HB — for new designs prefer the DF for its noise and power improvements; the TR suffix is tape and reel for production. The holed package needs a clear vent path in the enclosure design — confirm the mechanical opening against the datasheet keep-out before finalizing the housing. For water-resistant applications check the gel-coated variants in the family. Parameters verified against STMicroelectronics documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LPS25HBTR is a digital barometric pressure sensor from STMicroelectronics in an HLGA-10 package, with I2C/SPI interface on tape and reel — for altimeters, weather stations and indoor navigation. The 260–1260 hPa absolute pressure range with low power is the selection point: floor-level detection and altitude tracking from a 2.5 mm sensor. Selection advice: the TR suffix denotes tape and reel — match the full LPS25HBTR code for production orders. Confirm your pressure range and interface against the datasheet; for water-resistant applications, check the package venting requirements. Parameters verified against the ST official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LSM6DS3TR-C is a 6-axis inertial measurement unit from STMicroelectronics in an LGA-16 package, with accelerometer and gyroscope — for motion sensing in phones, wearables and industrial devices. The always-on low-power 6-axis sensing is the selection point: it became the reference mobile IMU, with the TR-C suffix marking the tape-and-reel production variant. Selection advice: the TR suffix denotes tape and reel — match the full LSM6DS3TR-C code for production orders. Confirm your full-scale range and power budget against the datasheet; for newer designs, compare against the LSM6DSO family. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LSM6DSLTR is a 6-axis inertial measurement unit from STMicroelectronics — a 3-axis accelerometer plus a 3-axis gyroscope in a single LGA-14 package — for motion sensing in phones, wearables, drones and industrial equipment. Its advantage is integration: one package, one qualification and one sourcing line replace two discrete sensors, saving board space and simplifying the BOM. Selection advice: the TR suffix denotes tape-and-reel packing for automated assembly — confirm your required packing format in the RFQ, as the same device can ship on reel or in tray depending on the lot. ST IMU portfolio has many neighboring variants, so match the complete LSM6DSLTR ordering code against your BOM rather than substituting a similar-looking IMU. State quantity, packing and date-code requirements with your RFQ and we reconfirm the offered lot before quotation, replying within 24 hours.

LSM6DSV16XTR is an STMicroelectronics 6-axis IMU with embedded machine learning — for always-on motion sensing where the host processor should stay asleep: 3-axis accelerometer (±2/±4/±8/±16 g) plus 3-axis gyroscope (±125 to ±4000 dps) with a machine-learning core and finite-state machine that run gesture, activity and context recognition on-chip. The triple-channel architecture processes UI, OIS and EIS data independently, and embedded Qvar charge-variation detection adds tap and swipe interfaces without extra hardware. Selection advice: the MLC/FSM is the reason to pick this over the LSM6DSL — if your design does not need on-chip AI, the older parts cost less; for camera stabilization designs confirm whether you need the OIS/EIS dedicated channels. I2C, SPI and MIPI I3C interfaces cover all host types. Parameters verified against STMicroelectronics documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

VL53L0CXV0DH/1 is a Time-of-Flight laser-ranging sensor from STMicroelectronics in a 4.4 × 2.4 mm optical module — 940 nm VCSEL, I2C interface, range up to 2 m. The 2 m laser ranging in a tiny module is the selection point: true distance measurement for gesture detection, robotics obstacle avoidance and presence sensing without the reflectance errors of IR intensity sensors. Selection advice: the V0DH/1 suffix denotes the LGA-12 optical module on tape and reel — match the full VL53L0CXV0DH/1 code. Confirm your ranging distance and ambient-light conditions against the datasheet. Parameters verified against the ST official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

VL53L1CXV0FY/1 is a time-of-flight distance sensor from STMicroelectronics in an LGA-12 package — for proximity detection, presence sensing and autofocus assist. The direct time-of-flight measurement is the selection point: true distance in millimeters regardless of target color or reflectance, unlike IR intensity sensors that drift with surface finish. Selection advice: the V0FY/1 suffix denotes the LGA-12 package variant on tape and reel — match the full VL53L1CXV0FY/1 code. Confirm your ranging distance and field-of-view needs against the datasheet, and keep the optical aperture clear in your enclosure design. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

VL53L4CXV0DH/1 is an STMicroelectronics time-of-flight ranging sensor with 6-meter extended range — multi-target detection in a 4.4 x 2.4 mm optical package. The selection point over the VL53L1CX is the histogram-based multi-target ranging: it reports up to three targets in the 18-degree field of view and separates targets 80 cm apart, which single-zone sensors cannot do. Selection advice: the V0DH/1 suffix is the standard optical package on tape and reel — for longer-range single-target needs the VL53L1CXV0FY/1 on this site is the alternative; for the shortest range at lowest cost the VL53L4CD is the sibling. I2C interface and footprint compatibility across the VL53 family simplify second-sourcing. Parameters verified against STMicroelectronics documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.