74HC74D,653

74HC04D,653 is a Nexperia hex inverter in SO-14 — for basic logic inversion: signal polarity fixes, clock inversion and simple glue logic. Six inverters in one package is the selection point: a low-cost way to fix polarity mistakes on a finished board. Selection advice: the D,653 suffix denotes SO-14 — pick the 74HC04 for plain inversion; when the input is slow or noisy, the Schmitt-trigger 74HC14 is the safer choice. 2.0–6.0 V supply covers most logic designs. Nexperia lists this part as Active. Parameters verified against the Nexperia official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74HC08D,653 is a Nexperia quad 2-input AND gate in SO-14 — for basic combinational logic: gating clocks, combining enables and simple glue logic. Four AND gates with 7 ns propagation delay is the selection point: fast-enough combining logic at the lowest cost. Selection advice: the D,653 suffix denotes SO-14 — pick the 74HC08 for plain AND logic; for wider functions in one package, consider multi-function gates. 2.0–6.0 V supply covers most logic designs. Nexperia lists this part as Active. Parameters verified against the Nexperia official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74HC14D,653 is a Nexperia hex inverting Schmitt trigger in SO-14 — for cleaning up noisy signals: button debouncing, slow-edge squaring and simple oscillators. The Schmitt hysteresis is the selection point: reliable switching on slow or noisy inputs where plain inverters chatter. Selection advice: the D,653 suffix denotes SO-14 — pick the 74HC14 for debouncing and signal conditioning; one gate plus an RC makes a simple clock oscillator. For non-inverting hysteresis, the 74HC14's sibling 74HC7014 (where available) is the alternative. Nexperia lists this part as Active. Parameters verified against the Nexperia official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74AVC9112DCH is a 1:4 clock fanout buffer from Nexperia in VSSOP-8 — for distributing one clock to four loads with low skew in digital systems. The 1:4 fanout is the selection point: one device replaces four discrete buffers, keeping clock edges aligned across loads. Selection advice: the AVC family runs at low voltage for modern logic levels — confirm your clock voltage and frequency fit the device ratings before committing. The DCH suffix denotes VSSOP-8. For more outputs, look at larger fanout buffers in the same family. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74HC138D,653 is a Nexperia 3-to-8 line decoder/demultiplexer with inverting outputs in SO-16 — for address decoding: chip-select generation, LED multiplexing and bus demultiplexing. Three address lines selecting eight outputs is the selection point: decoding logic without MCU pins. Selection advice: the D,653 suffix denotes SO-16 — pick the 138 for active-low chip selects (the most common); the 12 ns propagation delay suits most glue-logic timing. For active-high outputs, the 74HC238 is the sibling. Nexperia lists this part as Active. Parameters verified against the Nexperia official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74HC574PW is an octal D-type flip-flop with 3-state outputs in 20-pin TSSOP — positive-edge triggered, 8-bit register with a common output-enable, supply 2.0 V to 6.0 V, rated −40 °C to +125 °C. The octal register with 3-state outputs is the selection point: eight data bits latch on one clock edge and release to the bus only when enabled, which is the standard pattern for bus interfacing, LED/relay drive and address latching in 74-series glue logic. Selection advice: Nexperia is the current manufacturer (the NXP standard-logic line became Nexperia in 2017) — the full orderable code is 74HC574PW,112 where ,112 is the packing code; for TTL-level inputs choose the 74HCT574PW, for SO-20 assembly choose the 74HC574D. Nexperia does not show an explicit lifecycle status on the product page; distributors including Farnell currently list stock available for ordering. Evidence: the Nexperia product page and distributor listings confirm the type number, TSSOP-20 package, 2.0–6.0 V range and orderable code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74HC595D,118 is a Nexperia 8-bit shift register with output latch and 3-state outputs in SO-16, reel — for expanding MCU outputs: LED matrices, relay banks and 7-segment displays. Three pins driving unlimited cascaded outputs is the selection point: GPIO expansion at cents per pin. Selection advice: the D,118 suffix denotes SO-16 in reel for production — a second source to TI's SN74HC595D for supply resilience; verify logic thresholds match your design if mixing vendors. For tighter spaces, the TSSOP PW,118 variant shrinks the footprint. Parameters verified against the Nexperia official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74HC595PW,118 is a Nexperia PRODUCTION 8-bit serial-in, serial or parallel-out shift register with output latches and 3-state outputs in TSSOP-16 — for expanding MCU outputs in tight spaces: LED matrices, relay banks and display drivers. Three pins driving unlimited cascaded outputs is the selection point: GPIO expansion at cents per pin. Selection advice: the PW,118 suffix denotes TSSOP-16 — the compact variant of the SO-16 D,118; 2.0 V to 6.0 V supply and up to 108 MHz clock cover most logic designs. A second source to TI's SN74HC595PW for supply resilience. Parameters verified against the Nexperia official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

L6386ED013TR is an ST high-voltage high-side and low-side gate driver — SO-14, 600 V max bootstrap, 400 mA source / 650 mA sink, embedded comparator, bootstrap diode, tape and reel. The embedded comparator plus bootstrap diode is the selection point: current sensing and high-side supply in one driver — fewer external parts for 600 V half-bridge stages. Selection advice: ST lists the L6386ED013TR as Active. The ED013TR suffix pins the SO-14 package on tape and reel — match it to your footprint; the L6387 variant is the SO-8 version with fewer pins. Verify the 400 mA/650 mA drive against your MOSFET gate charge at the switching frequency. Evidence: ST data confirms Active, SO-14, 600 V bootstrap, drive currents, embedded comparator. Match the full L6386ED013TR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

L6391DTR is an ST high/low-side gate driver — SO-14, 600 V high-side rail, 290 mA source / 430 mA sink, integrated bootstrap diode, adjustable deadtime, interlocking, smart shutdown and fault-protection comparator, tape and reel. The integrated protection set is the selection point: adjustable deadtime, interlocking and smart shutdown in one driver — a protected half-bridge without external logic. Selection advice: ST lists the L6391DTR as Active. The DTR suffix denotes SO-14 on tape and reel — match it to your footprint; the L6390 is the SO-16 sibling without the full protection set. Verify the 290 mA/430 mA drive against your MOSFET gate charge at the switching frequency. Evidence: ST data confirms Active, SO-14, 600 V rail, drive currents, integrated bootstrap diode and protection features. Match the full L6391DTR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.