SN65HVD233D

SN65HVD230D is a Texas Instruments 3.3 V CAN transceiver — standby mode via pin 8, SOIC-8, up to 1 Mbps, −40 to +85 °C. The 3.3 V supply is the selection point: direct interfacing to 3.3 V MCUs with no 5 V rail — the classic CAN node for 3.3 V systems. Selection advice: lifecycle warning — TI has discontinued the SN65HVD230D ("no longer in production"); for new designs use the pin-compatible SN65HVD230 (the non-D variant) or a current 3.3 V CAN transceiver, and for repairs and legacy builds we source remaining distributor stock. Match the full SN65HVD230D code — the SN65HVD230 without D is the recommended replacement, not an identical part. Evidence: TI data confirms discontinued status, 3.3 V CAN, standby mode, SOIC-8, 1 Mbps. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

SN65HVD231D is a Texas Instruments 3.3 V CAN transceiver with sleep mode in SOIC-8 — for CAN nodes in automotive and industrial networks. 1 Mbps per ISO 11898-2 is the selection point: standard CAN physical layer from a 3.3 V supply. Lifecycle note: TI lists the SN65HVD231 as obsolete ("no longer in production") — for new designs, migrate to a current-production 3.3 V CAN transceiver such as the TCAN33x family; for repairs and legacy builds, we source remaining stock. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

SN65HVD232D is a Texas Instruments 3.3 V CAN transceiver with standby mode in SOIC-8 — for CAN nodes in automotive and industrial networks. 1 Mbps per ISO 11898-2 is the selection point: standard CAN physical layer from a 3.3 V supply. Lifecycle note: TI lists the SN65HVD232 as obsolete ("no longer in production") — for new designs, migrate to a current-production 3.3 V CAN transceiver such as the TCAN33x family; for repairs and legacy builds, we source remaining stock. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

SN65HVD233DR is a Texas Instruments 3.3 V CAN transceiver in SOIC-8 per ISO 11898-2, tape and reel — for CAN nodes in automotive and industrial networks. 1 Mbps with ±36 V bus-fault protection is the selection point: robust CAN physical layer from a 3.3 V supply. Selection advice: the DR suffix denotes SOIC-8 in tape and reel for production — the standby and loopback modes suit low-power nodes; for new designs, confirm lifecycle against the TI product page, as the SN65HVD233 family is aging — the TCAN33x family is the current-production alternative. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

INA240A1QDRQ1 is a Texas Instruments automotive high-side current sense amplifier with enhanced PWM rejection in SOIC-8, tape and reel — for motor phase-current sensing and solenoid monitoring in automotive drives. The PWM rejection is the selection point: accurate current measurement riding on fast-switching inverter outputs where ordinary amplifiers saturate. Selection advice: the Q1 suffix denotes the automotive-qualified variant — mandatory for automotive programs; the gain variant A1 sets the fixed gain — match it to your shunt and ADC range. For industrial-only designs, the non-Q1 INA240 is the alternative. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Texas Instruments lists LM393DR as an ACTIVE dual differential comparator with open-collector outputs in SOIC-8, with 2 V to 36 V supply range. The open-collector output is the design-relevant detail: it allows wired-OR logic and level translation to a different supply rail with a single pull-up resistor, which push-pull comparators cannot do. Selection advice: the DR suffix denotes SOIC-8 on tape and reel — the LM393 ships in several packages, so match the full code to your footprint. A comparator is not an op-amp: confirm your circuit uses it for threshold detection rather than linear amplification before substituting. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LM5109AMAX/NOPB is a Texas Instruments 1 A peak half-bridge gate driver in SOIC-8, tape and reel — for compact half-bridge stages: DC/DC, motor drives and inverters. 100 V bootstrap drive in a standard SOIC-8 is the selection point: high-voltage half-bridge in the industry's most common package. Selection advice: the MAX/NOPB denotes SOIC-8 in tape and reel for production — the easy-to-source package for prototypes through production; for higher drive current, the LM5105 family is the step up. 8 V to 14 V supply with 7 V UVLO. TI lists this part as ACTIVE. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LM5109MAX/NOPB is a Texas Instruments 100 V 1 A/1 A peak half-bridge gate driver with 7 V UVLO in SOIC-8, tape and reel — for compact half-bridge stages: DC/DC, motor drives and inverters. 100 V bootstrap drive in a standard SOIC-8 is the selection point: high-voltage half-bridge in the industry's most common package. Selection advice: the MAX/NOPB denotes SOIC-8 in tape and reel for production — the easy-to-source package for prototypes through production; the A variant (LM5109AMAX/NOPB) tightens specifications, so verify which your design was qualified with. 8 V to 14 V supply with 7 V UVLO. TI lists this part as ACTIVE. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LM5164DDAR is a Texas Instruments 100 V input synchronous buck converter in SOIC-8, tape and reel — for industrial power supplies: 48 V bus step-down, PoE front ends and motor-drive auxiliaries. The 100 V input rating is the selection point: direct operation from high-voltage industrial buses that standard 60 V bucks cannot survive. Selection advice: the DDAR suffix denotes SOIC-8 in tape and reel for production — plan the external MOSFET, inductor and compensation network per TI's reference design; this is a controller-class part, not a module. For lower-voltage rails, cheaper integrated bucks save board space. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

SN65HVD234D is a Texas Instruments 3.3 V CAN transceiver in 8-pin SOIC, tube packing — ISO 11898-2 compliant, up to 1 Mbps, ±36 V bus-fault protection, −7 V to +12 V common-mode range, ultra-low-power sleep mode (EN-pin controlled, about 50 nA typical) plus 200 µA standby, LVTTL I/O tolerant to 5 V, thermal shutdown, rated −40 °C to +125 °C. The 50 nA sleep with bus wake is the selection point: always-on automotive and industrial nodes stay under the quiescent-current budget that drains batteries in parked equipment, which a plain CAN transceiver without sleep control cannot meet. Selection advice: the D suffix is the SOIC-8 tube version (75 per tube) — the SN65HVD234DR is the tape-and-reel twin TI still shows as orderable; be aware LCSC lists this code as clearance stock (marked Discontinued in their listing with only small remaining quantity), so confirm lot, date code and traceability with your RFQ before committing to volume. For new designs TI points to the TCAN3413/TCAN3414 CAN FD parts, but those have different pinouts and are not drop-in replacements. Evidence: the TI SN65HVD234 datasheet packaging addendum confirms the ordering code, SOIC-8 tube and electrical ratings. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Skyworks and Qorvo expect to close their $22 billion merger on or about October 5, 2026. What the deal changes for RF front-end buyers — and a five-point checklist for before and after close.