TC4427CPA

23LC1024-I/P is a Microchip 1-Mbit SPI serial SRAM in 8-pin PDIP — for fast scratchpad memory: data buffering, display framebuffers and audio delay lines. Unlimited read/write endurance at up to 20 MHz SPI is the selection point: RAM speed with none of EEPROM's write-cycle limits. Selection advice: the I/P denotes PDIP-8 — the breadboard-friendly variant; for SMT, the SOIC variant is the pick. Volatile — for non-volatile needs, the 24LC EEPROM series is the sibling; for more speed, the SQI mode doubles throughput. Microchip lists this part as In Production. Parameters verified against the Microchip official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

24LC256-I/P is a Microchip 256 Kbit I2C serial EEPROM in 8-pin PDIP — for non-volatile storage: configuration data, calibration tables and event logs. 256 Kbit with 1M erase/write cycles is the selection point: the workhorse EEPROM density for embedded designs. Selection advice: the I/P denotes PDIP-8 — the breadboard-friendly variant; for SMT, the SOIC variant is the pick. 64-byte page writes and 400 kHz bus cover most logging needs; for larger storage, step up the 24LC series density. Microchip lists this part as In Production. Parameters verified against the Microchip official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ATtiny85-20PU is a Microchip 8-bit AVR microcontroller in 8-pin PDIP — for the tiniest control tasks: LED effects, simple sensors and glue-logic replacement. Eight pins with 1.8–5.5 V operation is the selection point: programmable control where a 555 timer used to be the answer. Selection advice: the 20PU denotes the 20 MHz PDIP-8 in tube — the breadboard-friendly variant; for SMT, the SOIC variant is the pick. For more I/O or peripherals, step up to the ATtiny84 or ATmega series. Microchip lists this part as In Production. Parameters verified against the Microchip official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

MCP1407-E/P is a Microchip high-speed 6 A low-side MOSFET gate driver in PDIP-8 — for driving power MOSFETs and IGBTs from logic: SMPS, motor drives and inverters. 6 A peak drive switching 2500 pF in 20 ns is the selection point: fast, clean gate drive that cuts switching losses. Selection advice: the E/P denotes PDIP-8 — the breadboard-friendly variant; for SMT, the SOIC variant is the pick. -40 to +125 °C suits industrial environments; the TC4420 is the alternate source in the same class. 18 V max supply. Microchip lists this part as In Production. Parameters verified against the Microchip official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TC4420CPA is a Microchip 6 A low-side MOSFET gate driver in PDIP-8 — for driving power MOSFETs and IGBTs from logic: SMPS, motor drives and inverters. 6 A peak drive switching 2500 pF in 25 ns is the selection point: fast, clean gate drive that cuts switching losses. Selection advice: the CPA suffix denotes PDIP-8 — the breadboard-friendly variant; for SMT, the SOIC variant is the pick. Single-channel — for dual outputs, the TC4427/TC4428 family is the sibling. 4.5 V to 18 V supply covers logic to gate-drive levels. Microchip lists this part as In Production. Parameters verified against the Microchip official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ATMEGA2560-16AU is a high-pin-count 8-bit AVR microcontroller from Microchip Technology with 256 KB Flash in a 100-pin TQFP package — for I/O-heavy embedded control. The 256 KB Flash with 100-pin I/O is the selection point: the largest AVR 8-bit device, the chip behind the Arduino Mega, for designs that outgrew smaller AVRs but want to stay in the 8-bit ecosystem. Selection advice: the 16AU suffix denotes the 16 MHz speed grade in TQFP-100 — match the full code to your layout and clock requirements. If your firmware fits in 128 KB, the ATMEGA1280 is the cheaper drop-in alternative in the same package. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ATMEGA328P-AU is an 8-bit AVR microcontroller from Microchip Technology in a 32-pin TQFP package — for embedded control and instrumentation. This is the chip behind the Arduino Uno: the largest hobbyist and educational ecosystem of any microcontroller, which means code examples and libraries for nearly every sensor. Selection advice: the AU suffix denotes TQFP-32 — the ATMEGA328P also ships in PDIP-28 (PU suffix), so match the full ATMEGA328P-AU code to your layout. The P (picoPower) variant is the low-power pick over the non-P version. Confirm your Flash and peripheral needs against the datasheet. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ATmega328P-PU is a Microchip ATmega328P 8-bit AVR microcontroller in 28-pin PDIP, tube — 32 KB flash, 2 KB SRAM, 1 KB EEPROM, up to 20 MHz, 1.8 V to 5.5 V supply, 23 I/O, 10-bit ADC, I2C/SPI/USART, −40 °C to +85 °C. The DIP package plus the Arduino ecosystem is the selection point: hand-solderable 8-bit control with the largest hobbyist code base ever — the classic Arduino Uno chip for education, prototypes and legacy products. Selection advice: Microchip lists the ATmega328P as Not Recommended for New Designs — for new products, migrate to a current AVR (ATmega4809) or 32-bit MCU; for repairs, education and legacy builds, we source remaining stock. Note: the catalog also lists ATMEGA328P-PU (all caps) as a separate entry for the same part — confirm which listing your RFQ references so the lot matches. Evidence: Mouser confirms NRND status, PDIP-28, tube packing and the full parameter set. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ATMEGA328PB-AU is a Microchip 8-bit AVR RISC-based microcontroller in 32-pin TQFP — the upgraded ATmega328P with more peripherals: two UARTs, two SPIs and more timers for connected and motor-control designs. The extra peripherals over the 328P is the selection point: P-compatibility with room to grow. Selection advice: the AU denotes TQFP-32 — for new 8-bit designs this is the safer pick over the NRND 328P; for 32-bit headroom, the SAMD21 or STM32F0 lines are the step up. Microchip lists this part as In Production. Parameters verified against the Microchip official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

ATMEGA32U4-AU is a Microchip 8-bit AVR microcontroller with native USB in 44-pin TQFP — for USB HID devices: custom keyboards, dongles and game controllers. The on-chip USB device controller is the selection point: Arduino Leonardo-class USB without an external bridge. Selection advice: the AU suffix denotes TQFP-44 — the same chip as the Leonardo; for new USB designs, compare 32-bit USB MCUs (SAMD21, STM32F0) for more headroom, but the AVR toolchain and community remain the fastest path for simple HID. Microchip lists this part as In Production. Parameters verified against the Microchip official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Microchip and Navitas showed an 800V-to-6V GaN reference design for AI racks, targeting 96% efficiency. What the design actually is, what it signals for component selection, and a five-point buyer checklist.