74HC595D,118

74HC595PW,118 is a Nexperia PRODUCTION 8-bit serial-in, serial or parallel-out shift register with output latches and 3-state outputs in TSSOP-16 — for expanding MCU outputs in tight spaces: LED matrices, relay banks and display drivers. Three pins driving unlimited cascaded outputs is the selection point: GPIO expansion at cents per pin. Selection advice: the PW,118 suffix denotes TSSOP-16 — the compact variant of the SO-16 D,118; 2.0 V to 6.0 V supply and up to 108 MHz clock cover most logic designs. A second source to TI's SN74HC595PW for supply resilience. Parameters verified against the Nexperia official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74HC595S16-13 is a Diodes Incorporated 8-bit shift register with 8-bit output register in SO-16, 13-inch tape and reel — for expanding MCU outputs: LED matrices, relay banks and 7-segment displays. Three pins driving unlimited cascaded outputs is the selection point: GPIO expansion at cents per pin. Selection advice: the S16-13 suffix denotes SO-16 on 13-inch reel for production — a second source to TI's SN74HC595D and Nexperia's 74HC595D for supply resilience; 2.0 V to 6.0 V supply with push-pull outputs covers most logic designs. Parameters verified against the Diodes official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

MC74HC595ADR2G is an onsemi MC74HC595A 8-bit serial-in shift register in SOIC-16 — 8-bit shift register plus 8-bit D-type latch with tri-state parallel outputs, independent clocks, asynchronous reset, 2 to 6 V supply, tape-and-reel packing of 2500 (R2G; DG is the rail version), -55 to +125 °C. The latched output stage is the selection point: it holds parallel data glitch-free while the shift register clocks, for cascading LED drivers, relay drivers and display panels from SPI ports of CMOS MCUs. Selection advice: the A revision has improved timing over the original 74HC595 — match the full MC74HC595ADR2G code, since R2G is the 2500-reel SOIC version and DG is rail. This is CMOS logic (not TTL), so for 5 V TTL-input compatibility choose the MC74HCT595A series. onsemi lists this code as Active. Evidence: onsemi MC74HC595A datasheet (ordering information) and distributor listings confirm 8-bit latched shift register, SOIC-16, 2500/reel packing and -55 to +125 °C. Match the full MC74HC595ADR2G code for package and packing. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

SN74HC595DR is a Texas Instruments 8-bit serial-in, parallel-out shift register with 3-state output register in SOIC-16, tape and reel — for expanding MCU outputs: LED matrices, relay banks and 7-segment displays. Three pins driving unlimited cascaded outputs is the selection point: GPIO expansion at cents per pin. Selection advice: the DR suffix denotes SOIC-16 in tape and reel for production — for breadboards, the through-hole N variant is easier. Cascade multiple 595s for more outputs; mind the total supply current when driving many LEDs. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74HC138D,653 is a Nexperia 3-to-8 line decoder/demultiplexer with inverting outputs in SO-16 — for address decoding: chip-select generation, LED multiplexing and bus demultiplexing. Three address lines selecting eight outputs is the selection point: decoding logic without MCU pins. Selection advice: the D,653 suffix denotes SO-16 — pick the 138 for active-low chip selects (the most common); the 12 ns propagation delay suits most glue-logic timing. For active-high outputs, the 74HC238 is the sibling. Nexperia lists this part as Active. Parameters verified against the Nexperia official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74AVC9112DCH is a 1:4 clock fanout buffer from Nexperia in VSSOP-8 — for distributing one clock to four loads with low skew in digital systems. The 1:4 fanout is the selection point: one device replaces four discrete buffers, keeping clock edges aligned across loads. Selection advice: the AVC family runs at low voltage for modern logic levels — confirm your clock voltage and frequency fit the device ratings before committing. The DCH suffix denotes VSSOP-8. For more outputs, look at larger fanout buffers in the same family. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74HC04D,653 is a Nexperia hex inverter in SO-14 — for basic logic inversion: signal polarity fixes, clock inversion and simple glue logic. Six inverters in one package is the selection point: a low-cost way to fix polarity mistakes on a finished board. Selection advice: the D,653 suffix denotes SO-14 — pick the 74HC04 for plain inversion; when the input is slow or noisy, the Schmitt-trigger 74HC14 is the safer choice. 2.0–6.0 V supply covers most logic designs. Nexperia lists this part as Active. Parameters verified against the Nexperia official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74HC08D,653 is a Nexperia quad 2-input AND gate in SO-14 — for basic combinational logic: gating clocks, combining enables and simple glue logic. Four AND gates with 7 ns propagation delay is the selection point: fast-enough combining logic at the lowest cost. Selection advice: the D,653 suffix denotes SO-14 — pick the 74HC08 for plain AND logic; for wider functions in one package, consider multi-function gates. 2.0–6.0 V supply covers most logic designs. Nexperia lists this part as Active. Parameters verified against the Nexperia official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74HC14D,653 is a Nexperia hex inverting Schmitt trigger in SO-14 — for cleaning up noisy signals: button debouncing, slow-edge squaring and simple oscillators. The Schmitt hysteresis is the selection point: reliable switching on slow or noisy inputs where plain inverters chatter. Selection advice: the D,653 suffix denotes SO-14 — pick the 74HC14 for debouncing and signal conditioning; one gate plus an RC makes a simple clock oscillator. For non-inverting hysteresis, the 74HC14's sibling 74HC7014 (where available) is the alternative. Nexperia lists this part as Active. Parameters verified against the Nexperia official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

74HC574PW is an octal D-type flip-flop with 3-state outputs in 20-pin TSSOP — positive-edge triggered, 8-bit register with a common output-enable, supply 2.0 V to 6.0 V, rated −40 °C to +125 °C. The octal register with 3-state outputs is the selection point: eight data bits latch on one clock edge and release to the bus only when enabled, which is the standard pattern for bus interfacing, LED/relay drive and address latching in 74-series glue logic. Selection advice: Nexperia is the current manufacturer (the NXP standard-logic line became Nexperia in 2017) — the full orderable code is 74HC574PW,112 where ,112 is the packing code; for TTL-level inputs choose the 74HCT574PW, for SO-20 assembly choose the 74HC574D. Nexperia does not show an explicit lifecycle status on the product page; distributors including Farnell currently list stock available for ordering. Evidence: the Nexperia product page and distributor listings confirm the type number, TSSOP-20 package, 2.0–6.0 V range and orderable code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.