TJA1043T/1J

TJA1057GT/0Z is an NXP AEC-Q100 qualified high-speed CAN FD transceiver in SOIC-8 — for cost-optimized automotive CAN networks: the workhorse PHY for body and chassis CAN buses. CAN FD data rates, optimized EMC performance for 12V automotive systems, standby mode for low-power wake-up, and pin-compatible across the TJA1057 family. Heat evidence: high-speed CAN remains the dominant automotive bus by volume — every vehicle ships with multiple CAN transceivers, and the GT variant adds CAN FD for next-generation platforms. Selection advice: the GT is the CAN FD-capable variant — for classic CAN only the TJA1057T costs less; the /0Z code is the SOIC-8 standard package. AEC-Q100 qualified. Parameters verified against NXP documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TJA1057GT/1Z is an NXP high-speed CAN FD transceiver in SOIC-8 — for automotive and industrial CAN networks: 5 Mbps CAN FD, 4.75–5.25 V supply, -40°C to +150°C, 8 kV ESD, TXD dominant timeout, silent mode. Lifecycle note: Mouser flags this variant NRND (not recommended for new designs) — suitable for repairs, legacy production and existing designs; for new CAN FD designs qualify a current-production transceiver. Selection advice: the /1Z is the SOIC-8 reel variant — the TJA1057 family also ships in HVSON; match the package to your layout. Parameters verified against NXP documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TJA1462BT/0Z is an NXP CAN FD signal-improvement (SIC) transceiver in SOIC-8 — for automotive CAN FD networks where ringing limits data rate or topology size: body controllers, gateways and battery management. Active signal improvement per ISO 11898-2:2024 enables reliable CAN FD up to 8 Mbps in larger, more complex networks than conventional transceivers tolerate, with AEC-Q100 Grade 1 qualification. Selection advice: this is a pin-compatible drop-in for the classic TJA1051 on this site — upgrade the footprint without PCB changes when moving to CAN FD; for non-SIC CAN FD at lower cost the TCAN1044 family is the alternative. The BT/0Z code is the SOIC-8 standard package — confirm the exact suffix against your assembly process. Parameters verified against NXP documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

MCP2562FDT-E/MF is a Microchip high-speed CAN FD transceiver in 8-lead DFN (3×3 mm), tape and reel — up to 8 Mbps CAN FD data rates, 4.5–5.5 V supply, 5 µA standby, VIO pin for direct interfacing to 1.8–5.5 V controllers, SPLIT pin for stabilized common mode, TXD dominant timeout, permanent-dominant detection, thermal shutdown and short-circuit protection, −40 °C to +125 °C. The CAN FD rate is the selection point: classic CAN tops out at 1 Mbps, while this part handles the flexible-data-rate frames modern automotive and industrial buses require — without it, an 8 Mbps bus silently fails. Selection advice: the FD in the part number is the CAN FD capability — the non-FD MCP2561/2562 (1 Mbps) is cheaper but not interchangeable on an FD bus; T means tape and reel, E is the extended −40 to +125 °C grade, MF is the DFN-8 package (SN is SOIC-8). An unpowered node does not load the bus. Evidence: the Microchip MCP2561/2FD datasheet (packaging and marking tables) and Farnell/Newark listings confirm 8 Mbps, DFN-8, −40 to +125 °C and reel packing. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TCAN1044ADRQ1 is a Texas Instruments AEC-Q100 Grade 1 CAN FD transceiver in SOIC-8 — for automotive networks migrating from classic CAN to CAN FD: body control modules, gateways and battery management systems. 5 Mbps CAN FD data rate (2 Mbps classic CAN), ISO 11898-2:2016 compliant, ±58V bus fault protection, and 1.7V-to-5.5V VIO for 3.3V/5V MCU interfacing. Heat evidence: CAN FD is the mandatory upgrade path as vehicle E/E architectures consolidate — every new automotive platform from 2024 onward specifies CAN FD for backbone communication. Selection advice: the A variant adds flexible data-rate support over the base TCAN1044 — for 8 Mbps signal-improvement networks the TJA1462 on this site is the SIC alternative; the DRQ1 code is the SOIC-8 reel version. AEC-Q100 Grade 1 (-40 to +125°C) qualified. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TJA1020T/CM is an NXP LIN transceiver in SOIC-8 — for automotive body electronics: door modules, climate control and seat control on LIN sub-buses. 20 kBd LIN physical layer, 5–27 V supply, low slope mode for reduced EMI, 3.3 V/5 V compatible inputs, AEC-Q100 qualified. Heat evidence: NXP holds the leading LIN transceiver market share and element14/Farnell show active trading with multi-thousand-piece stock — LIN demand grows with vehicle electronic content. Selection advice: the /CM code is the standard SOIC-8 variant — the pin-compatible TJA1021 adds improved ESD and LIN 2.1 compliance for new designs; some distributors list older TJA1020 variants as obsolete, always order the /CM,118 reel code. Parameters verified against NXP and distributor documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TJA1021T/20/C is an NXP LIN 2.1 transceiver in SOIC-8 — for in-vehicle LIN sub-networks at 1–20 kBd. LIN 2.0/2.1/2.2 and SAE J2602 compliant, pin-to-pin compatible with the TJA1020, improved ESD (±6 kV IEC 61000-4-2), integrated termination resistor, K-line compatible, AEC-Q100 qualified. Heat evidence: element14 India flags extended lead times — market demand has caused delivery fluctuation and the part is exempt from discounts, a genuine tightness signal. Selection advice: the /20/C code is the LIN 2.1 SOIC-8 reel variant — drop-in upgrade from the TJA1020; for commander applications add the external resistor-diode network per the datasheet. Parameters verified against NXP and distributor documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TJA1042T/3 is an NXP high-speed CAN transceiver with standby mode in SOIC-8 — for modern automotive CAN nodes: body electronics, gateways and sensor modules needing low-power bus wake-up. Up to 1 Mbps (CAN FD capable per ISO 11898-2:2016), low-current standby with remote wake-up, -40°C to +150°C junction range. Heat evidence: same CAN supply tightness as the TJA1050 family — carmakers qualifying second sources are pulling TJA1042 into new designs. Selection advice: the /3 suffix is the key — pin 5 is VIO enabling direct 3 V MCU interfacing; vs the TJA1050 it adds standby/wake-up, making it the modern default for new CAN designs. Parameters verified against NXP documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TJA1050T/CM is an NXP high-speed CAN transceiver in SOIC-8 — note: Mouser lists the TJA1050T/CM,118 ordering code as End of Life (scheduled for obsolescence) — for automotive and industrial CAN networks: the industry-default 1 Mbps PHY for body, chassis and powertrain buses. Fully ISO 11898 compliant, 4.75–5.25 V supply, 3.3/5 V logic compatible, up to 110 nodes per bus, silent (listen-only) mode. Heat evidence: vehicle makers scrambling for Nexperia alternatives are creating spillover tightness in CAN transceivers — the TJA1050 is the benchmark part every CAN design references. Selection advice: the TJA1050 has no standby/wake-up — for low-power nodes needing bus wake-up choose the TJA1042 instead; the /CM code is the SOIC-8 standard package. For new designs the TJA1042 is the recommended successor. Parameters verified against NXP documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TJA1050T/CM,118 is an NXP Semiconductors TJA1050 high-speed CAN transceiver in SO-8, 13-inch reel — up to 1 Mbps CAN, standby mode via pin 8, 4.5 V to 5.5 V supply, −40 °C to +85 °C. The /CM,118 code is the selection point: the SO-8 package on 13-inch reel — the volume code for the classic CAN node transceiver used in countless industrial and automotive designs. Selection advice: lifecycle warning — NXP lists the TJA1050T as Discontinued; the pin-compatible replacement is the TJA1051T (100% backwards compatible with improved EMC and ESD). For new designs use the TJA1051T/CM,118; for repairs and legacy builds we source remaining TJA1050 distributor stock — match the full TJA1050T/CM,118 code character by character, since the TJA1051T is a different (better) part. Evidence: NXP TJA1050 datasheet confirms Discontinued status with TJA1051 as replacement, SO-8 and /CM,118 13-inch reel. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Skyworks and Qorvo expect to close their $22 billion merger on or about October 5, 2026. What the deal changes for RF front-end buyers — and a five-point checklist for before and after close.