STM32F030F4P6

STM32F030F4P6TR is a 32-bit Arm Cortex-M0 microcontroller from STMicroelectronics in TSSOP-20 — for space-constrained control tasks like small appliances, LED drivers and sensor nodes. The TSSOP-20 footprint is the selection point: 32-bit control where only an 8-pin or 20-pin device fits. Selection advice: the F4 denotes 16 KB Flash / 4 KB SRAM — the smallest STM32F0; the P6TR denotes TSSOP-20 in tape and reel. If your code outgrows 16 KB, step to the F030C8 before re-spinning the board. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

STM32G030F6P6 is an entry-level Arm Cortex-M0+ microcontroller from STMicroelectronics in a 20-pin TSSOP package — for compact control designs that need 32-bit performance at an 8-bit budget. The Cortex-M0+ at this price point is the selection point: it undercuts older 8-bit designs on cost while giving modern debug and toolchain support. Selection advice: the F6P6 code denotes the Flash size and TSSOP-20 package — match the full code, since the STM32G0 family spans multiple densities and packages. Confirm your peripheral and pin-count needs against the datasheet. This family is heavily counterfeited: require lot and date-code traceability. State quantity, packing and traceability requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

STM32G030F6P6TR is an STMicroelectronics Arm Cortex-M0+ microcontroller with 32 KB Flash, 64 MHz, in TSSOP-20 tape and reel — for cost-optimized control in production: small appliances, LED lighting and simple sensor nodes. The G0 value line is the selection point: modern peripherals and 64 MHz at a price that displaces legacy 8-bit MCUs. Selection advice: the F6 denotes 32 KB Flash / 8 KB SRAM in TSSOP-20 — the smallest G0; the P6TR denotes tape and reel for production. For more GPIO or USB, step up within the STM32G0 family rather than adding external chips. ST lists this order code as active; we verify availability per lot. Parameters verified against the ST official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

STM8S003F3P6 is an STMicroelectronics 8-bit microcontroller with 8 KB Flash in TSSOP-20 — for the simplest control tasks: button interfaces, LED sequencing and basic sensor polling. The low price is the selection point: among the lowest-cost programmable control ST offers. Selection advice: the F3 denotes 8 KB Flash — for anything beyond trivial logic, the STM32F030 or G030 32-bit lines cost little more and buy a modern toolchain; reserve the STM8 for true cost-floor designs. The P6 denotes TSSOP-20. Parameters verified against the ST official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

STM8S003F3P6TR is a STMicroelectronics 8-bit STM8S microcontroller at 16 MHz with 8 KB Flash in 20-pin TSSOP — for cost-driven control tasks that do not need 32-bit horsepower: small appliances, smart switches and industrial timers. 16 MHz STM8 core, 8 KB Flash, 1 KB RAM, 128-byte data EEPROM, 10-bit ADC with 5 channels, UART/SPI/I2C, and 2.95 V to 5.5 V operation. Ranked #23 on the 创芯指数 March 2026 hot-search TOP 50 with 20,048 searches and a 499.88% month-on-month increase, as buyers rediscover 8-bit value in the price-up cycle. Selection advice: the P6TR code is the 20-pin TSSOP reel version — for the lowest pin count the J3 8-pin SO variant is the alternative; at under half a dollar in volume this undercuts 32-bit MCUs where the application fits in 8 KB. Parameters verified against STMicroelectronics documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

L293D is an STMicroelectronics push-pull four-channel H-bridge motor driver with internal clamp diodes in 16-pin PowerDIP — for small DC motors, steppers and relay coils: robot kits, toys and lab fixtures. 600 mA per channel with 4.5–36 V supply is the selection point: driving motors straight from logic pins with no external diodes. Selection advice: the D suffix denotes the internal clamp diodes — the key reason to pick the L293D over the L293; for higher currents, the L298N or modern integrated drivers are the step up. Mind the ~2 V saturation drop in your motor voltage budget. Parameters verified against the ST official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

L6386ED013TR is an ST high-voltage high-side and low-side gate driver — SO-14, 600 V max bootstrap, 400 mA source / 650 mA sink, embedded comparator, bootstrap diode, tape and reel. The embedded comparator plus bootstrap diode is the selection point: current sensing and high-side supply in one driver — fewer external parts for 600 V half-bridge stages. Selection advice: ST lists the L6386ED013TR as Active. The ED013TR suffix pins the SO-14 package on tape and reel — match it to your footprint; the L6387 variant is the SO-8 version with fewer pins. Verify the 400 mA/650 mA drive against your MOSFET gate charge at the switching frequency. Evidence: ST data confirms Active, SO-14, 600 V bootstrap, drive currents, embedded comparator. Match the full L6386ED013TR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

L6387ED013TR is an ST high-voltage high-side and low-side gate driver — SO-8, 600 V max, 400 mA source / 650 mA sink, embedded comparator, bootstrap diode, interlocking and current-sense support, tape and reel. The SO-8 package is the selection point: 600 V half-bridge drive in an 8-pin footprint — the compact sibling of the SO-14 L6386 for space-constrained power stages. Selection advice: ST lists the L6387ED013TR as Active. The ED013TR suffix pins the SO-8 package on tape and reel — match it to your footprint; the L6386 is the larger SO-14 variant. Verify the 400 mA/650 mA drive against your MOSFET gate charge at the switching frequency. Evidence: ST data confirms Active, SO-8, 600 V, drive currents, embedded comparator. Match the full L6387ED013TR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

L6390DTR is an ST half-bridge gate driver — SO-16, 600 V high-side rail, 290 mA source / 430 mA sink, 50 V/ns dV/dt immunity, UVLO, tape and reel. The 50 V/ns dV/dt immunity is the selection point: robust half-bridge drive for fast-switching MOSFETs where high dv/dt causes false triggering in weaker drivers. Selection advice: ST lists the L6390DTR as Active. The DTR suffix denotes SO-16 on tape and reel — match it to your footprint. Verify the 290 mA/430 mA drive against your MOSFET gate charge at the switching frequency — for larger switches step up to a higher-current driver. Evidence: ST data confirms Active, SO-16, 600 V rail, drive currents, 50 V/ns immunity. Match the full L6390DTR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

L6391DTR is an ST high/low-side gate driver — SO-14, 600 V high-side rail, 290 mA source / 430 mA sink, integrated bootstrap diode, adjustable deadtime, interlocking, smart shutdown and fault-protection comparator, tape and reel. The integrated protection set is the selection point: adjustable deadtime, interlocking and smart shutdown in one driver — a protected half-bridge without external logic. Selection advice: ST lists the L6391DTR as Active. The DTR suffix denotes SO-14 on tape and reel — match it to your footprint; the L6390 is the SO-16 sibling without the full protection set. Verify the 290 mA/430 mA drive against your MOSFET gate charge at the switching frequency. Evidence: ST data confirms Active, SO-14, 600 V rail, drive currents, integrated bootstrap diode and protection features. Match the full L6391DTR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.