PACKAGE REFERENCEPG-VSON-8Confirm case, pinout and ordering suffix before purchase.

MANUFACTURER PART RECORD

TLE49012-S0001

TLE49012-S0001 is an Infineon Technologies XENSIV high-precision digital magnetic angle sensor in a 3 mm x 3 mm x 0.9 mm PG-VSON-8 package, built on Vertical Hall technology with a preconfigured SPI interface (SPI, ABZ, UVW and PWM available in the family) and 16-bit resolution for automotive temperature ranges. Its integrated self-calibration with automatic initial calibration plus continuous on-chip compensation, including static and dynamic angle error compensation, holds accuracy over life without end-of-line calibration. The business gain is a faster, cheaper motor-control design: on-axis and off-axis (end-of-shaft and out-of-shaft) mounting removes mechanical alignment constraints, the preconfigured SPI output drops straight into a standard motor-controller interface, and AEC-Q100 qualification with ISO 26262 ASIL B compliance covers automotive functional-safety requirements. Evidence: the Infineon TLE49012-S0001 product page lists this variant as active and preferred, and the TLx49012 datasheet (Rev. 1.00, June 2026) defines the device. Selection advice: choose S0001 when the host controller reads absolute angle over SPI and the application needs ASIL B; choose S0002 when the controller needs incremental ABZ output instead of SPI; choose E0001 when the motor driver needs UVW commutation signals; choose the TLI49012-E0001 when automotive qualification is not required. Parameters verified against Infineon Technologies documentation.

SensorsSPI magnetic angle sensorPG-VSON-8

Add to RFQ

MPN: TLE49012-S0001
Manufacturer: Infineon Technologies
Family: SPI magnetic angle sensor
Package: PG-VSON-8
Manufacturer channel coverage: Checked by RFQ
Data last checked: Commercial check required
Required order checks: Suffix, package, date code, lot, source and traceability

PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function: Vertical-Hall digital angle sensor · SPI pre-configured variant with 16-bit angle readout
Supply voltage: 3.0 V to 5.5 V · functional operating range
Supply current: 15 mA maximum · functional-range limit (Table 3), applying across the 3.0 V to 5.5 V supply and the full operating temperature range
Start-up time: 1.5 ms typical / 1.7 ms maximum · until the first measurement sample on the interface
Magnetic induction range: 30 mT to 120 mT · the extended 20 mT to 30 mT range carries additional angle error
Angle error (INL): 0.3° maximum with SysCal enabled (−40°C to +125°C, including lifetime drift); 0.6° maximum over −40°C to +150°C; 0.7° maximum with SysCal disabled up to +125°C (1.3° maximum to +150°C)
Angle noise: 0.02° maximum RMS (an,slow) · at TA = 25°C, BXY = 70 mT, filter gains k1 = 2, k2 = 9; the 0.05° maximum RMS figure applies over TA = −40°C to +150°C (datasheet Table 7)
Operating temperature: −40°C to +150°C · AEC-Q100 Grade 0, ISO 26262 ASIL B
Absolute maximum ratings: VDD −0.3 V to 7.0 V and TJ = 170°C are absolute-maximum figures from Table 2 (time-limited over lifetime), not operating values
Order code: Infineon OPN TLE49012S0001XTMA1 (SP005858906) · package marking E12S1
Order-code package: PG-VSON-8-2, 3 mm × 3 mm · all TLx49012 variants share this package; the marking distinguishes them
Manufacturer packing: Tape and reel per the Infineon product page · packing form, not stock or MOQ

Source: Infineon TLE49012-S0001 Data Sheet Rev. 1.00 (2026-06-11) · Table 2 Absolute Maximum Ratings, Table 3 Operating Range, Tables 5–7 Angle Performance; Description (ordering) table · Reviewed 2026-10-30

Sourcing note

Confirm measurement range, accuracy, package orientation, calibration and environmental requirements.

Before you request a quote

Match the interface suffix
The suffix is the interface and resolution discriminator: −S0001 is SPI at 16-bit, −S0002 is ABZ + PWM at 14-bit. Same package and pinout family, but not interchangeable order codes — confirm the suffix against the controller interface.
Plan the magnet and calibration
The field at the sensor must sit inside 30 mT to 120 mT for the specified accuracy. Enabling SysCal improves the maximum angle error from 0.7° to 0.3° (both figures up to +125°C); budget the calibration step in production if the design relies on it.

Official documentation

Confirm the latest manufacturer revision and ordering suffix before design-in or purchase.

Open official datasheet Manufacturer product page

QUOTE WORKFLOW

Four checks before a commercial offer.

Identity

Exact MPN, manufacturer and suffix

Supply

Supplier type, quantity and freshness

Evidence

Lot, labels, photos and documents

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Sensors records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

TLE49012-S0001 FAQ

What are the key specifications of TLE49012-S0001?

From the verified technical profile: Function: Vertical-Hall digital angle sensor · SPI pre-configured variant with 16-bit angle readout; Supply voltage: 3.0 V to 5.5 V · functional operating range; Supply current: 15 mA maximum · functional-range limit (Table 3), applying across the 3.0 V to 5.5 V supply and the full operating temperature range. These are the catalog-recorded values for TLE49012-S0001 — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.

What does the TLE49012-S0001 SPI magnetic angle sensor detect?

The catalog family for TLE49012-S0001 is SPI magnetic angle sensor from Infineon Technologies, supplied as PG-VSON-8. The exact measurement range, accuracy and operating conditions live in the manufacturer datasheet — confirm them there against your application before ordering.