LD1086D2M33TR

LD1086D2MTR is an STMicroelectronics 1.5 A low-dropout regulator in D2PAK (TO-263) — adjustable output from 1.25 V set by two external resistors output, 1.5 A guaranteed output, 1.3 V typical dropout at 1.5 A, ±1% output tolerance at 25 °C, over-current and thermal protection, tape-and-reel (TR) packing, -40 to +125 °C. The D2PAK (TO-263) package is the selection point: adjustable. Selection advice: do not substitute another LD1086 package code without checking the footprint. Match the full LD1086D2MTR code for package, output type and packing. Evidence: ST LD1086 datasheet (Doc ID 6739) and distributor listings confirm 1.5 A, adjustable output from 1.25 V set by two external resistors, D2PAK (TO-263) and tape-and-reel (TR) packing. Match the full LD1086D2MTR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LD1086D2TTR is an STMicroelectronics 1.5 A low-dropout regulator in D2PAK (TO-263) — adjustable output from 1.25 V set by two external resistors output, 1.5 A guaranteed output, 1.3 V typical dropout at 1.5 A, ±1% output tolerance at 25 °C, over-current and thermal protection, tape-and-reel (TR) packing, -40 to +125 °C. The D2PAK (TO-263) package is the selection point: adjustable. Selection advice: do not substitute another LD1086 package code without checking the footprint. Match the full LD1086D2TTR code for package, output type and packing. Evidence: ST LD1086 datasheet (Doc ID 6739) and distributor listings confirm 1.5 A, adjustable output from 1.25 V set by two external resistors, D2PAK (TO-263) and tape-and-reel (TR) packing. Match the full LD1086D2TTR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LD1086BDTTR is an STMicroelectronics LD1086 adjustable 1.5 A low-dropout regulator — 1.25 to 28.5 V output set by two resistors, up to 30 V input, typical dropout 1.3 V at 1.5 A, ±1% tolerance at 25 °C, in DPAK (TO-252), tape-and-reel packing (TR), -40 to +125 °C. The adjustable output in a compact DPAK is the selection point: one part covers any rail from 1.25 V up with the efficiency advantage that quiescent current flows into the load, unlike PNP LDOs. Selection advice: pin-to-pin compatible with older 3-terminal adjustable regulators per ST, so it upgrades LM317-style layouts — but it is NOT a fixed-voltage part, so confirm the feedback divider values in your BOM. Only a 10 µF minimum output capacitor is needed for stability, and overcurrent plus thermal limits are built in. Evidence: ST LD1086 datasheet and DigiKey listings confirm 1.5 A adjustable, 30 V max input, DPAK and reel packing. Match the full LD1086BDTTR code for output type, package and packing. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LD1086BV-DG is an STMicroelectronics LD1086 adjustable 1.5 A low-dropout regulator in TO-220 — 1.25 to 28.5 V output set by two resistors, up to 30 V input, typical dropout 1.3 V at 1.5 A, ±1% tolerance at 25 °C, tube packing (DG suffix), -40 to +125 °C. The TO-220 through-hole package is the selection point: the best thermal path of the LD1086 family for high-dissipation rails, with a heatsink mounting hole and pin-to-pin compatibility with older 3-terminal adjustable regulators per ST. Selection advice: this is the adjustable version — confirm the feedback divider in your BOM, and note the automotive grade is the separate Y-suffix code, not this catalog -DG code. Only a 10 µF minimum output capacitor is needed for stability, and overcurrent plus thermal limits are built in. For surface-mount assembly choose the DPAK (BDTTR) or D2PAK variants instead. Evidence: ST LD1086 datasheet order-code table and distributor listings confirm adjustable, 1.5 A, TO-220, tube packing. Match the full LD1086BV-DG code for output type, package and packing. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LD1086DTTR is an STMicroelectronics 1.5 A low-dropout regulator in DPAK (TO-252) — adjustable output from 1.25 V set by two external resistors output, 1.5 A guaranteed output, 1.3 V typical dropout at 1.5 A, ±1% output tolerance at 25 °C, over-current and thermal protection, tape-and-reel (TR) packing, -40 to +125 °C. The DPAK (TO-252) package is the selection point: adjustable. Selection advice: do not substitute another LD1086 package code without checking the footprint. Match the full LD1086DTTR code for package, output type and packing. Evidence: ST LD1086 datasheet (Doc ID 6739) and distributor listings confirm 1.5 A, adjustable output from 1.25 V set by two external resistors, DPAK (TO-252) and tape-and-reel (TR) packing. Match the full LD1086DTTR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LD1086PUR is an STMicroelectronics adjustable 1.5 A low-dropout regulator in DFN8 (4x4, exposed pad) — 1.25 V to 28.5 V adjustable output with two external resistors, 1.5 A guaranteed output, 1.3 V typical dropout at 1.5 A, ±1% output tolerance at 25 °C, 88 dB PSRR at 120 Hz, tape-and-reel packing (UR), -40 to +125 °C. The DFN8 package is the selection point: the smallest LD1086 footprint for dense boards where the exposed pad dumps heat to the PCB — thermal vias under the pad are required for full 1.5 A. Selection advice: the PUR code is the DFN8 adjustable version — the D2TTR code is D2PAK and V-DG is TO-220, so match the full LD1086PUR code for package. It is pin-to-pin compatible with older 3-terminal adjustable regulators, but verify the resistor divider for your target voltage. Evidence: ST LD1086 datasheet (Doc ID 6739) and distributor listings confirm 1.5 A, adjustable, DFN8 and reel packing. Match the full LD1086PUR code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LD1086V-DG is an STMicroelectronics adjustable 1.5 A low-dropout regulator in TO-220 — 1.25 V to 28.5 V adjustable output with two external resistors, 1.5 A guaranteed output, 1.3 V typical dropout at 1.5 A, ±1% output tolerance at 25 °C, tube packing (DG), -40 to +125 °C. The TO-220 package is the selection point: the only LD1086 form with a mounting tab for a bolt-on heatsink — essential for sustaining 1.5 A with large input-output drops that would overheat surface-mount versions. Selection advice: the V code is the TO-220 adjustable version — the D2TTR code is D2PAK and PUR is DFN8, so match the full LD1086V-DG code for package. It is pin-to-pin compatible with older 3-terminal adjustable regulators; DG indicates tube packing, not reel. Evidence: ST LD1086 datasheet (Doc ID 6739) and distributor listings confirm 1.5 A, adjustable, TO-220 and tube packing. Match the full LD1086V-DG code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LD1086V33-DG is an STMicroelectronics fixed 3.3 V 1.5 A low-dropout regulator in TO-220 — fixed 3.3 V output (±2% full range), 1.5 A guaranteed output, 1.3 V typical dropout at 1.5 A, 79 dB PSRR at 120 Hz, over-current and thermal protection, tube packing (DG), -40 to +125 °C. The fixed 3.3 V output is the selection point: no external divider resistors needed — the TO-220 mounting tab handles full 1.5 A with a bolt-on heatsink for 3.3 V rails. Selection advice: the V33 code is the fixed 3.3 V TO-220 version — the adjustable V-DG code needs an external divider, and D2TTR/DTTR are surface-mount codes, so match the full LD1086V33-DG code for output type, package and packing. DG indicates tube packing, not reel. Evidence: ST LD1086 datasheet (Doc ID 6739) and DigiKey listings confirm fixed 3.3 V, 1.5 A, TO-220 and tube packing, Active status. Match the full LD1086V33-DG code. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

LD1086D2T33TR is an STMicroelectronics LD1086 fixed 3.3 V low-dropout linear regulator — 1.5 A, in D2PAK (TO-263), tape-and-reel packing, input up to 30 V, operating -40 to +125 °C. The 1.3 V typical dropout at 1.5 A with ±1% output tolerance at 25 °C is the selection point: this is the part that makes 3.3 V from a 5 V rail where an LM317-class standard regulator runs out of headroom. Selection advice: pick the LD1086 family by dropout budget — if your input-output differential is under 2 V at full load, the LD1086 works and the LM317 does not; if headroom is generous, the LM317 is cheaper. The D2T (D2PAK) package carries more heat than the smaller DPAK sibling, so for continuous 1.5 A with a large voltage drop, prefer this D2PAK code and verify copper area; for lighter loads the DPAK variants save board space. Only 10 µF minimum output capacitance is needed for stability, and internal current and thermal limits are built in. Evidence: ST LD1086 datasheet and distributor listings confirm 3.3 V, 1.5 A, 1.3 V dropout, D2PAK and tape-and-reel. Match the full LD1086D2T33TR code for voltage, package and packing. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

L298N is a dual full-bridge driver from STMicroelectronics in a Multiwatt-15 package — for DC and stepper motors. This is the classic motor driver that launched a thousand Arduino robot kits: two full bridges in one package, simple to drive, nearly indestructible. Selection advice: the L298 is a bipolar Darlington design with significant saturation voltage drop — at higher currents it runs hot and wastes power, so modern MOSFET-based drivers (like the TB6612FNG) are more efficient for battery applications. Choose the L298N where simplicity and ruggedness matter more than efficiency, and plan heatsinking for the Multiwatt package. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.