100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsPower ManagementTPS1H100BQPWPRQ1
PACKAGE REFERENCEHTSSOP-14Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

TPS1H100BQPWPRQ1

Texas Instruments

TPS1H100BQPWPRQ1 is a Texas Instruments single-channel high-side switch in 14-pin HTSSOP, tape and reel — for automotive load driving: relays, lamps and resistive loads switched from the high side. AEC-Q100 qualification with 4 A, 80 milliohm N-channel FET and 5 V to 40 V load range is the selection point: an automotive-grade protected switch, not a bare MOSFET. Selection advice: the Q1 suffix denotes the automotive-qualified grade — for the non-automotive version, check the non-Q1 ordering code. Adjustable current limiting, open-load detection and thermal shutdown with a status flag simplify diagnostics; the R suffix denotes tape and reel. −40 °C to +125 °C. TI lists the TPS1H100-Q1 family as Active. Source: Texas Instruments SLVSCM2 Rev. D.

Power ManagementHigh-side switchHTSSOP-14
MPN
TPS1H100BQPWPRQ1
Manufacturer
Texas Instruments
Family
High-side switch
Package
HTSSOP-14
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
Lifecycle
Active
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function
Single-channel smart high-side power switch
Operating voltage range
3.5 V to 40 V
On-resistance
80 mΩ typ / 100 mΩ max
Adjustable current limit
0.5 A to 7 A (±20% at 0.5 A)
Diagnostics version
Version B — current-sense analog output
Package
HTSSOP-14, thermally enhanced (PWP); R = large tape and reel
Qualification
AEC-Q100 Grade 1 (-40°C to 125°C ambient)
Functional safety
TI Functional Safety-Capable
Source: Texas Instruments TPS1H100-Q1 data sheet SLVSCM2 Rev. D (ti.com) · Reviewed 2026-09-28
ORDER-CODE COMPARISON

Same series, different order codes.

TPS1H100-Q1 is available in the following manufacturer order codes. They share the same High-side switch design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
TPS1H100AQPWPRQ1HTSSOP-14LARGE T&RVersion A provides open-drain status output; the on-site Version B provides analog current-sense output — the diagnostic interface circuit requires redesign and cannot be treated as a functional drop-in; same HTSSOP-14 package as TPS1H100BQPWPRQ1; this difference alone does not require PCB pad changes.
TPS1H100BQPWPRQ1HTSSOP-14——
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Power Management records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

TPS1H100BQPWPRQ1 FAQ

What is the difference between TPS1H100BQPWPRQ1 and TPS1H100AQPWPRQ1?

These are order-code variants of the same Texas Instruments series. They share the core design; the ordering code selects the exact configuration — TPS1H100AQPWPRQ1: Version A provides open-drain status output; the on-site Version B provides analog current-sense output — the diagnostic interface circuit requires redesign and cannot be treated as a functional drop-in; same HTSSOP-14 package as TPS1H100BQPWPRQ1; this difference alone does not require PCB pad changes.. TPS1H100BQPWPRQ1 itself is the HTSSOP-14 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

Is TPS1H100BQPWPRQ1 automotive-qualified?

The TPS1H100BQPWPRQ1 ordering code carries the manufacturer's automotive qualification marker. Qualification grade, temperature range and PPAP documentation depend on the exact lot offered, so state your automotive documentation requirements (PPAP level, AEC test reports) in the RFQ and we will confirm them against the offered lot before quotation.

What are the key specifications of TPS1H100BQPWPRQ1?

From the verified technical profile: Function: Single-channel smart high-side power switch; Operating voltage range: 3.5 V to 40 V; On-resistance: 80 mΩ typ / 100 mΩ max. These are the catalog-recorded values for TPS1H100BQPWPRQ1 — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.