OPT3001

OPT3001DNPR is a digital ambient light sensor from Texas Instruments in a USON-6 package, with human-eye spectral response — for display backlight control, lighting systems and optical switching. The human-eye-matched spectral response is the selection point: it measures what people actually perceive, so display dimming tracks real viewing conditions instead of raw lux. Selection advice: the DNPR suffix denotes USON-6 on tape and reel — match the full OPT3001DNPR code to your footprint. Confirm your lux range and interrupt needs against the datasheet. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

OPT4001 is a Texas Instruments high-speed, high-precision digital ambient light sensor — for display backlight control and human-presence lighting where the sensor must see what the human eye sees: precision optical filtering matches the photopic response with strong near-infrared rejection, so readings stay accurate behind dark cover glass. Semi-logarithmic output with automatic full-scale selection covers 312.5 µlux to 83 klux (PicoStar) without host gain management, and 12 conversion times from 600 µs to 800 ms trade speed against resolution. Selection advice: two packages exist — the SOT-5X3 (DTS) with interrupt pin for hardware wake-up, and the smaller PicoStar (YMN) without it; pick DTS when the host needs threshold interrupts, YMN for minimum footprint. This is the upgrade path from the OPT3001 — for new designs prefer the 4001 for its wider dynamic range. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

BH1750FVI-TR is a 16-bit digital ambient light sensor IC with I2C serial output, 1–65535 lx measurement range, -40 to +85 °C operation in WSOF-6. The 16-bit direct lux output is the advantage: no ADC scaling or calibration math in firmware — the sensor reports illuminance directly for display backlight control and lighting systems. Note the lifecycle: ROHM no longer lists this part on its website (likely discontinued/NRND); parameters follow ROHM original datasheet No.11046EDT01 as hosted by distributors, and exact units are stocked by major malls. Selection advice: for new designs, qualify a current-production ambient light sensor before committing the BOM; for existing builds, remaining stock is lot-dependent — send quantity and date-code requirements with your RFQ. We reconfirm the offered lot before quotation and reply within 24 hours.

VEML7700-TT is a digital ambient light sensor from Vishay with I2C interface on tape and reel — for display backlight control, automotive lighting and consumer devices. The 16-bit dynamic range with close-to-human-eye response is the selection point: it handles both dim indoor and bright outdoor light without saturation, which cheaper sensors cannot. Selection advice: the TT suffix denotes the tape-and-reel packing — match the full VEML7700-TT code for production orders. Confirm your lux range and power budget against the datasheet. Parameters verified against the Vishay official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TI lists LM35DZ/NOPB as Active (In Stock) — a 10 mV/°C linear analog temperature sensor, 0 to +100 °C, in a TO-92 3-pin package. The linear 10 mV/°C output is the selection point: temperature reads directly with a voltmeter or ADC, no lookup tables or linearization math. Selection advice: the /NOPB suffix denotes the lead-free orderable code — the bare LM35DZ code is superseded, so specify LM35DZ/NOPB for new orders. For new digital designs, compare against I2C digital sensors; for simple analog monitoring and repairs, match this code exactly. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TMAG5170 is a Texas Instruments high-precision linear 3D Hall-effect sensor — for contactless position sensing in industrial and automotive designs: three independent Hall elements on X, Y and Z axes with a 12-bit ADC delivering 20 ksps, ±2.6% max linear error and an integrated CORDIC engine for full 360-degree angle calculation. On-chip temperature sensing enables system-level drift compensation, and SPI with CRC plus diagnostics suit safety-related designs. Selection advice: two field-range variants exist — the A1 (±25/±50/±100 mT) for close-range precision, the A2 (±75/±150/±300 mT) for larger air gaps; pick the range before magnet selection, not after. For I2C instead of SPI, the TMAG5173 is the sibling. The -40 to +150C range covers under-hood use — for full automotive qualification specify the TMAG5170-Q1. Parameters verified against Texas Instruments documentation. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

TMP117AIDRVR is a high-accuracy digital temperature sensor from Texas Instruments in a 6-pin WSON package, with an I2C interface — for precision thermal monitoring in medical, industrial and test equipment. High accuracy without calibration is the selection point: where an NTC thermistor needs per-unit calibration, the TMP117 delivers calibrated digital readings out of the box, removing a production step. Selection advice: the DRVR suffix denotes the WSON-6 package on tape and reel — match the full code to your layout. Confirm your accuracy requirement against the datasheet before paying for precision you do not need; for coarse monitoring a cheaper sensor suffices. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Texas Instruments lists TMP117AIYBGR as a digital temperature sensor in DSBGA-6 — for I2C temperature-monitoring designs that need high accuracy without calibration. The ±0.1 °C-class accuracy is the selection point: it replaces thermistor-plus-calibration designs with a direct digital readout, cutting production test time. Selection advice: the AIYBGR suffix denotes DSBGA-6 on tape and reel — the TMP117 ships in multiple packages, so match the full TMP117AIYBGR code to your footprint. Confirm your accuracy and temperature-range requirements against the datasheet; for cost-driven designs, a lower-grade sensor may suffice. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Texas Instruments lists TMP117MAIDRVR as an M-grade digital temperature sensor in WSON-6 — for I2C temperature-monitoring designs that need a solderable package with high accuracy. The WSON-6 package is the selection point within the TMP117 family: easier assembly and inspection than the DSBGA chip-scale variant, at the cost of board space. Selection advice: the MAIDRVR suffix denotes the M accuracy grade in WSON-6 on tape and reel — match the full code, since the TMP117 ships in DSBGA and WSON with multiple grades. Confirm your accuracy needs against the datasheet; the N grade is the looser-tolerance alternative. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.

Texas Instruments lists TMP117MAIYBGR as an M-grade digital temperature sensor in DSBGA-6 — for I2C temperature-monitoring designs where board space is critical. The DSBGA chip-scale package is the selection point: the smallest TMP117 footprint for dense layouts, trading assembly ease for size. Selection advice: the MAIYBGR suffix denotes the M accuracy grade in DSBGA-6 on tape and reel — match the full code, since the family spans DSBGA and WSON packages with M and N grades. For easier soldering, the WSON-6 MAIDRVR is the alternative in the same grade. Parameters verified against the TI official product page. State quantity, packing and date-code requirements in your RFQ; we reconfirm the offered lot before quotation and reply within 24 hours.