100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsAnalog ICsMAX31865ATP+T
PACKAGE REFERENCETQFN-20Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

MAX31865ATP+T

Analog Devices

MAX31865ATP+T is an Analog Devices (Maxim) RTD-to-digital converter — a 15-bit delta-sigma ADC optimized for platinum RTDs, handling PT100 to PT1000 (100 Ω to 1 kΩ at 0 °C), compatible with 2-, 3- and 4-wire sensor connections, SPI interface, in 20-pin TQFN-EP, 3 to 3.6 V supply, operating -40 to +125 °C. Integration is the selection point: one chip replaces the precision current source, ratiometric ADC and linearization lookup of a discrete RTD front end, delivering 0.03125 °C nominal resolution and 0.5 °C maximum total accuracy with 21 ms conversion time. Selection advice: the external reference resistor sets the RTD type — 400 Ω for PT100, 4 kΩ for PT1000 — and mismatching it is the classic design error, so confirm the resistor value against your sensor before layout. Inputs survive ±45 V wiring faults and the chip flags RTD/cable open and short conditions, which is why it suits industrial and medical temperature loops. The ATP code is the TQFN-20-EP package (AAP is the SSOP-20 sibling), T denotes tape and reel, and the 3.6 V maximum means a 3.3 V rail — not 5 V. Evidence: ADI/Maxim datasheet and distributor listings confirm 15-bit resolution, PT100-PT1000 range, 2/3/4-wire support and TQFN-20-EP.

Analog ICsRTD-to-digital converterTQFN-20
MPN
MAX31865ATP+T
Manufacturer
Analog Devices
Family
RTD-to-digital converter
Package
TQFN-20
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function
Resistance-to-digital converter optimized for platinum RTDs; handles 100 Ω to 1 kΩ (at 0°C) RTDs (PT100 to PT1000); 2-, 3-, and 4-wire sensor connections
ADC resolution
15-bit, no missing codes; nominal temperature resolution 0.03125°C; total accuracy 0.5°C (0.05% of full scale) max over all operating conditions
Interface
SPI-compatible, SCLK up to 5.0 MHz
Supply voltage
3.0 V to 3.6 V (VDD and VDVDD)
Protection / diagnostics
±45 V input protection; fault detection (open RTD element, RTD shorted to out-of-range voltage, short across RTD element)
Package / ordering code
20 TQFN-EP (5×5 mm), EP = exposed pad; "+" = lead(Pb)-free/RoHS-compliant; trailing "T" = tape and reel
Operating temperature
-40°C to +125°C
Source: Analog Devices/Maxim MAX31865 RTD-to-Digital Converter datasheet 19-6478 Rev 3 · ordering information · Reviewed 2026-09-28
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Analog ICs records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

MAX31865ATP+T FAQ

What are the key specifications of MAX31865ATP+T?

From the verified technical profile: Function: Resistance-to-digital converter optimized for platinum RTDs; handles 100 Ω to 1 kΩ (at 0°C) RTDs (PT100 to PT1000); 2-, 3-, and 4-wire sensor connections; ADC resolution: 15-bit, no missing codes; nominal temperature resolution 0.03125°C; total accuracy 0.5°C (0.05% of full scale) max over all operating conditions; Interface: SPI-compatible, SCLK up to 5.0 MHz. These are the catalog-recorded values for MAX31865ATP+T — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.