100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
ProductsAnalog ICsDAC161S997RGHR
PACKAGE REFERENCEVQFN-16Confirm case, pinout and ordering suffix before purchase.
MANUFACTURER PART RECORD

DAC161S997RGHR

Texas Instruments

DAC161S997RGHR is a Texas Instruments 16-bit delta-sigma DAC for 4-20 mA current-loop transmission, SPI interface, 2.7 to 3.6 V supply, in WQFN-16 (4 × 4 mm) — the loop-powered transmitter chip for industrial 2-wire and 4-wire field instruments. The 100 µA total supply current is the selection point: in a loop-powered transmitter the DAC must sip from the 4 mA budget, leaving the rest for the sensor and MCU. Selection advice: this is a 4-20 mA loop transmitter, not a general voltage-output DAC — the output stage drives an external bipolar transistor (e.g. 2N3904) per the TI reference design, so verify the loop compliance and error-level programming (3.375 mA / 21.75 mA defaults) against your system FMEA. HART modulator interfacing is built in for smart-transmitter designs. The RGH suffix is the WQFN-16 package, R = tape and reel (4500). Parameters verified against the TI DAC161S997 datasheet (SNAS621) and Mouser listings.

Analog ICsDigital-to-analog converterVQFN-16
MPN
DAC161S997RGHR
Manufacturer
Texas Instruments
Family
Digital-to-analog converter
Package
VQFN-16
Manufacturer channel coverage
Checked by RFQ
Data last checked
Commercial check required
Required order checks
Suffix, package, date code, lot, source and traceability
PROCUREMENT DATA

Identity and sourcing requirements.

MANUFACTURER DATA REVIEW

Key technical specifications

Ordering-code highlights reviewed against official manufacturer documentation.

Function
16-bit delta-sigma DAC for 4-20 mA current-loop transmitters
Resolution
16 bits
Output type
Buffered current output for 4-20 mA loop
Supply voltage range
2.7 V to 3.6 V
Gain error temperature coefficient
5 ppmFS/°C
Interface
4-wire SPI; internal voltage reference and oscillator; HART modulator interface
Package
WQFN-16, 4 × 4 mm, 0.5 mm pitch (RGH); R = large tape and reel
Operating temperature range
-40°C to 105°C
Absolute maximum ratings
Supply voltage (VA and VD to COMA and COMD) −0.3 V to 6 V; voltage between any two pins 6 V maximum; current into or out of any pin 5 mA maximum, except the OUT pin at 50 mA maximum; junction temperature 150 °C maximum; operating temperature −40 °C to 105 °C; storage temperature −65 °C to 150 °C (§7.1)
Source: Texas Instruments DAC161S997 Datasheet SNAS621A Rev. A (Revised December 2014) · §7.1 Absolute Maximum Ratings, Package Option Addendum · Reviewed 2026-11-02
ORDER-CODE COMPARISON

Same series, different order codes.

DAC161S997 is available in the following manufacturer order codes. They share the same Digital-to-analog converter design; the table highlights package, packing and ordering differences. Quote the exact code your BOM needs.

Order codePackagePackingKey difference
DAC161S997RGHRVQFN-16——
DAC161S997RGHTWQFN-16SMALL T&RSame WQFN-16 package as DAC161S997RGHR; this difference alone does not require PCB pad changes; factory packing is SMALL T&R, 250 per pack; DAC161S997RGHR is LARGE T&R, 4,500 per pack.
QUOTE WORKFLOW

Four checks before a commercial offer.

01

Identity

Exact MPN, manufacturer and suffix

02

Supply

Supplier type, quantity and freshness

03

Evidence

Lot, labels, photos and documents

04

Terms

Price, lead time, payment and shipping

RELATED REFERENCES

Explore more Analog ICs records

Browse existing catalog records — same series first, then the same category and manufacturer. These are not confirmed replacements; compatibility requires engineering review.

COMMON QUESTIONS

DAC161S997RGHR FAQ

What is the difference between DAC161S997RGHR and DAC161S997RGHT?

These are order-code variants of the same Texas Instruments series. They share the core design; the ordering code selects the exact configuration — DAC161S997RGHT: Same WQFN-16 package as DAC161S997RGHR; this difference alone does not require PCB pad changes; factory packing is SMALL T&R, 250 per pack; DAC161S997RGHR is LARGE T&R, 4,500 per pack.. DAC161S997RGHR itself is the VQFN-16 configuration. A code that differs by even one character may be a different device, so always quote the complete code exactly as it appears on your BOM.

What are the key specifications of DAC161S997RGHR?

From the verified technical profile: Function: 16-bit delta-sigma DAC for 4-20 mA current-loop transmitters; Resolution: 16 bits; Output type: Buffered current output for 4-20 mA loop. These are the catalog-recorded values for DAC161S997RGHR — always re-check them against the manufacturer datasheet revision quoted on your BOM before finalizing the design.