VERIFIED CROSS-REFERENCE
LM317 alternatives & equivalent parts
TI 三端可调正电压稳压器,输出 1.25–37V,1.5A,TO-220 封装引脚为 ADJ/VOUT/VIN。 — common packages: TO-220. Each candidate below cites its manufacturer datasheet; check the relationship badge before substituting.
4 verified alternatives for LM317
| Alternative | Manufacturer | Relationship | Key differences | Source |
|---|---|---|---|---|
| LM338T/NOPB | Texas Instruments | Pin-to-pinDrop-in: same footprint and pinout. | TI 同系列 5A 可调稳压器,TO-220 封装与引脚顺序与 LM317 相同,可直接替换;输出电流 5A(LM317 为 1.5A),输出范围 1.24–32V(LM317 为 1.25–37V),压差约 2.7V(典型值,高于 LM317);若用到大电流必须加大散热器。 | TI 官方数据手册 |
| LM350T/NOPB | Texas Instruments | Pin-to-pinDrop-in: same footprint and pinout. | TI 同系列 3A 可调稳压器,TO-220 引脚兼容;最大输入 35V(LM317 为 40V),输出范围 1.25–33V,压差约 2.3V;3A 满载时发热更大,需重新校核散热。 | TI 官方数据手册 |
| LT1086CT#PBF | Analog Devices | Pin-to-pinDrop-in: same footprint and pinout. | ADI 1.5A 低压差可调稳压器,TO-220 引脚顺序与 LM317 相同(1=ADJ、2=VOUT、3=VIN,散热片=VOUT);压差仅 1.3V(典型值),低压差应用发热更小;但最大工作输入仅 25V,且手册要求输出端必须接 ≥10µF 电容保证稳定,最小负载 5mA。 | ADI 官方页面 |
| LM317T-DG | STMicroelectronics | Pin-to-pinDrop-in: same footprint and pinout. | ST 生产的 LM317 第二供应商版本,TO-220 封装引脚完全相同,输出 1.2–37V、电流 >1.5A,电气与机械均为直接替代;仅品牌与订货后缀不同。 | ST 官方 LM317 数据手册的第三方镜像(gloriouselectronics);LM317T-DG 在订货表中 |
Pre-replacement checklist
- 确认目标输出电流与压差:LM338/LM350 电流更大但压差和散热需求不同,LT1086 最大输入仅 25V
- LT1086 必须按手册配置 ≥10µF 输出电容并保证 ≥5mA 最小负载电流
- 分压电阻调节公式通用,但需按替代料手册复核限流与功耗
- TO-220 散热设计按实际负载电流重新校核
Need the exact lot, date code or a second source quoted?
Send the original MPN and the approved alternative. Sourceics reconfirms source, stock, date code and commercial terms before any order — no substitution without your engineering approval.
Request a quote for LM317Source part reference: TI 官方数据手册. Equivalence notes are reference guidance, not a guarantee of fit — always verify against your schematic and layout.