VERIFIED CROSS-REFERENCE

PC817 alternatives & equivalent parts

Sharp 单通道光耦:输入侧红外 LED、输出侧光电晶体管,DIP-4 封装,隔离电压 5kVrms,VCEO 80V,CTR 50–600%(IF=5mA),常用于开关电源反馈与信号隔离。 — common packages: DIP-4(引脚 1=Anode、2=Cathode、3=Emitter、4=Collector). Each candidate below cites its manufacturer datasheet; check the relationship badge before substituting.

CANDIDATE COMPARISON

4 verified alternatives for PC817

AlternativeManufacturerRelationshipKey differencesSource
EL817EverlightPin-to-pinDrop-in: same footprint and pinout.Everlight DIP-4 光耦,引脚图与 PC817 完全一致(1=A、2=K、3=E、4=C)。差异:VCEO 最小 35V(低于 PC817 的 80V)、隔离 5000Vrms、CTR 50–600%(A/B/C/D 分档为 80–160/130–260/200–400/300–600%)、开关时间约 4/3µs;输出侧电压超过 35V 的电路需复核。Everlight 官方数据手册的第三方镜像(yumpu 文档托管)
LTV-817Lite-OnPin-to-pinDrop-in: same footprint and pinout.Lite-On DIP-4 光耦,官方引脚图与 PC817 一致(1=A、2=K、3=E、4=C)。差异:VCEO 35V(低于 80V)、隔离 5kVrms、CTR 50–600%(L/A/B/C/D 分档)、开关时间约 4/3µs;TME 等渠道有 LTV-817-L 现货。Lite-On 官方数据手册的第三方镜像(datasheet.directory)
TLP521-1ToshibaPin-to-pinDrop-in: same footprint and pinout.Toshiba DIP-4 光耦,官方引脚图与 PC817 一致(1=A、2=K、3=E、4=C)。关键差异:隔离电压仅 2500Vrms(PC817 为 5000Vrms,安规要求高的场景不可直接代换);VCEO 55V(低于 80V)、CTR 50–600%(GB 档 100–600%)、开关更快(约 2/3µs)。数据手册较旧,下单前请确认 Toshiba 在产状态。Toshiba 官方数据手册的第三方镜像(100y);手册较旧,下单前须确认在产状态
4N35VishayFunctionalSame function: board or design change needed.Vishay 在产光耦,DIP-6 封装,隔离 5000Vrms,CTR 最低约 100%,VCEO 70V。差异:DIP-6 与 DIP-4 不兼容(引脚 1=A、2=K、3=NC、4=E、5=C、6=Base,多出基极引出端),需改 PCB;CTR 起点更高,驱动电流设计需复核。Vishay 官方数据手册的第三方镜像(datasheet.company)
BEFORE YOU SUBSTITUTE

Pre-replacement checklist

Need the exact lot, date code or a second source quoted?

Send the original MPN and the approved alternative. Sourceics reconfirms source, stock, date code and commercial terms before any order — no substitution without your engineering approval.

Request a quote for PC817

Source part reference: Sharp 官方 PC817 系列数据手册(Sheet No. D2-A03102EN)的第三方镜像(datasheets.com). Equivalence notes are reference guidance, not a guarantee of fit — always verify against your schematic and layout.