VERIFIED CROSS-REFERENCE
INA240A1PWR alternatives & equivalent parts
TI bidirectional current-sense amplifier with enhanced PWM rejection: fixed 20 V/V gain (A1), -4 to 80 V common-mode range, 2.7-5.5 V supply, 400 kHz bandwidth, for inline motor and solenoid current sensing. — common packages: TSSOP-8 (PW). Each candidate below cites its manufacturer datasheet; check the relationship badge before substituting.
3 verified alternatives for INA240A1PWR
| Alternative | Manufacturer | Relationship | Key differences | Source |
|---|---|---|---|---|
| INA241A | Texas Instruments | Functional alternativeSame function: board or design change needed. | TI's product pages call the INA241 family a drop-in successor, but for the TSSOP (PW) version of the INA240 that is not the case: the INA241A comes only in DDF/DGK/D 8-pin packages with a different pinout (1 IN-, 2 GND, 3 REF2, 4 NC, 5 OUT, 6 VS, 7 REF1, 8 IN+), so it needs a board change. What it buys is accuracy and range: for 20 V/V use the A2 orderables, with +/-0.01% maximum gain error and +/-15 uV maximum offset (+/-3 uV typical; the +/-10 uV row belongs to the A3/A4 gains) (versus 0.20% and +/-25 uV), common-mode widened to -5 to 110 V, supply 2.7-20 V, bandwidth 1.1 MHz and enhanced PWM rejection up to 125 kHz switching. | TI datasheet |
| INA241B | Texas Instruments | Functional alternativeSame function: board or design change needed. | The B grade of the same successor family, with the same package and pinout limitation as the INA241A (no PW/TSSOP pin-compatible option for the INA240A1PWR), the same -5 to 110 V common-mode range, 2.7-20 V supply, 1.1 MHz bandwidth and enhanced PWM rejection to 125 kHz. For 20 V/V use the B2 orderables. Accuracy versus the source is mixed: gain error improves to +/-0.1% maximum from 0.20%, but offset worsens to +/-150 uV maximum from +/-25 uV and gain drift to +/-5 ppm/C from +/-2.5 ppm/C. | TI datasheet |
| INA181 | Texas Instruments | Functional alternativeSame function: board or design change needed. | The INA181A1 provides the same nominal 20 V/V gain, set by an internal matched resistor network (the gain is not programmed by an external resistor), but the operating envelope is much smaller: common-mode only -0.2 to +26 V versus -4 to +80 V, A1 bandwidth 350 kHz versus 400 kHz, maximum offset +/-150 uV at 0 V common-mode (+/-500 uV at 12 V), and TI does not list enhanced PWM rejection for it. It comes only in 6-pin SOT-23 (DBV) or SC70 (DCK) with a single REF pin, so neither package nor pinout matches the 8-pin TSSOP source. | TI datasheet |
Pre-replacement checklist
- Do not trust the drop-in headline for this package: no candidate here fits the INA240A1PWR TSSOP-8 pinout; all three need a layout change
- Order the right gain variant: A1 means 20 V/V on the INA240/INA181, but the INA241 equivalent is the A2/B2 code
- Check the common-mode range: the INA181 stops at 26 V; the INA241 family extends to 110 V
- If the design relies on enhanced PWM rejection (fast-switching motor drives), the INA181 is not specified for it
Need the exact lot, date code or a second source quoted?
Send the original MPN and the approved alternative. Sourceics reconfirms source, stock, date code and commercial terms before any order — no substitution without your engineering approval.
Request a quote for INA240A1PWRSource part reference: TI datasheet. Equivalence notes are reference guidance, not a guarantee of fit — always verify against your schematic and layout.