VERIFIED CROSS-REFERENCE
CC0402KRX7R7BB104 cross-reference: same-spec parts from other manufacturers
Yageo general-purpose multilayer ceramic capacitor: 0.1 uF +/-10%, 16 Vdc, X7R dielectric, -55 to +125 C, the standard 0402 decoupling value for 3.3 V and 5 V rails. — common packages: 0402 (1005 metric), 1.0 x 0.5 x 0.5 mm. Each candidate below cites its manufacturer datasheet; check the relationship badge before substituting.
3 same-spec cross-references for CC0402KRX7R7BB104
| Alternative | Manufacturer | Relationship | Key differences | Source |
|---|---|---|---|---|
| GRM155R71C104KA88D | Murata | Same rated specsSame footprint and rated specification; not a manufacturer-certified equivalent. | Same specification on every headline parameter: Murata lists 0.1 uF +/-10%, X7R, 16 Vdc and 1.00 x 0.50 x 0.50 mm, matching the Yageo part on capacitance, tolerance, dielectric, voltage, footprint and thickness. The D suffix is Murata's 180 mm paper-tape reel code. Murata's spec table gives no single numeric DC-bias derating figure, but its product page Characteristic Data section carries a C-DC bias curve (25 °C, AC 1 Vrms), so read effective capacitance at your working voltage from that curve before treating the two as electrically identical. | Murata product page |
| CL05B104KO5NNNC | Samsung Electro-Mechanics | Same rated specsSame footprint and rated specification; not a manufacturer-certified equivalent. | Samsung's official component library lists base code CL05B104KO5NNN at 100.0 nF +/-10%, X7R, 16.0 Vdc and 1.00 x 0.50 x 0.50 mm, matching the Yageo specification; the final C in the ordering code is Samsung's cardboard-tape packaging code, so the electrical and mechanical specification is the base code plus packaging. The library entry gives no numeric DC-bias capacitance-change value, so DC-bias behaviour at rail voltage should be confirmed from Samsung's characteristic data. | Samsung Electro-Mechanics component library |
| C1005X7R1C104K050BC | TDK | Same rated specsSame footprint and rated specification; not a manufacturer-certified equivalent. | TDK lists 100 nF +/-10%, X7R, 16 VDC and 1.00 x 0.50 x 0.50 mm, matching the Yageo core specification and thickness. One secondary limit differs: TDK specifies insulation resistance at 1,000 MOhm minimum versus Yageo's 5.0 GOhm minimum, while both list dissipation factor at 5% maximum. TDK's published characteristic graph did not yield a numeric DC-bias value in this check, so confirm effective capacitance at your DC bias from TDK's data. | TDK product page |
Pre-replacement checklist
- Match all five spec points: 0.1 uF, +/-10%, 16 V, X7R and 0.5 mm thickness (0402 parts also come in other thicknesses)
- Do not mix with the 50 V sibling CC0402KRX7R9BB104: same footprint, different voltage rating
- Check effective capacitance at your rail voltage: X7R DC-bias derating differs by vendor and is not headline-specified
- Confirm the packaging suffix (reel size and tape type) for your production line
Need the exact lot, date code or a second source quoted?
Send the original MPN and the approved alternative. Sourceics reconfirms source, stock, date code and commercial terms before any order — no substitution without your engineering approval.
Request a quote for CC0402KRX7R7BB104Source part reference: Yageo datasheet (spec sheet PDF, third-party mirror). Equivalence notes are reference guidance, not a guarantee of fit — always verify against your schematic and layout.