100+ staff · 1,500+ m² in Shenzhen and Hong Kong · Since 2002
VERIFIED CROSS-REFERENCE

ADS1115IDGSR alternatives & equivalent parts

TI precision low-power 16-bit I2C delta-sigma ADC with a 4-channel input MUX (4 single-ended or 2 differential inputs), PGA, internal reference and a programmable comparator, 8-860 SPS. — common packages: VSSOP-10. Each candidate below cites its manufacturer datasheet; check the relationship badge before substituting.

CANDIDATE COMPARISON

3 verified alternatives for ADS1115IDGSR

AlternativeManufacturerRelationshipKey differencesSource
ADS1015Texas InstrumentsPin-compatibleDrop-in: same footprint and pinout.TI lists the ADS1015 as pin-for-pin with the ADS1115 in the same VSSOP-10 (DGS) package, with identical pin functions, supply range (2.0-5.5 V), PGA ranges (+/-256 mV to +/-6.144 V), comparator and four I2C addresses. The trade-off is resolution versus speed: it is a 12-bit part (versus 16-bit) but converts faster, at 128 SPS to 3.3 kSPS (versus 8-860 SPS).TI datasheet
ADS1114Texas InstrumentsPin-compatibleDrop-in: same footprint and pinout.Same VSSOP-10 package and the same pin assignments for every shared pin (ADDR pin 1, ALERT/RDY pin 2, AIN0/AIN1 pins 4/5, VDD pin 8, SDA/SCL pins 9/10), with identical 16-bit resolution, 8-860 SPS rate, 2.0-5.5 V supply, PGA and comparator. What is lost is the input MUX: it has only one differential or one single-ended input, and the AIN2/AIN3 positions (pins 6 and 7) are no-connects, so it is a drop-in only for single-channel use.TI datasheet
MCP3427MicrochipFunctional alternativeSame function: board or design change needed.Also a 16-bit I2C delta-sigma ADC in a 10-pin MSOP, but its pinout is almost entirely different from the ADS1115 (pin 3 is ground on both parts; the other 9 pins differ) and it is not a drop-in: only two differential input channels, usable single-ended by grounding the CHn- pin at the cost of one bit of resolution (positive half scale only), two address pins and no ALERT/RDY comparator pin. It is also much slower and narrower in range: 15 SPS at 16-bit (240 SPS max at 12-bit) versus 860 SPS, PGA gain x1/x2/x4/x8 (full-scale ±2.048 V at gain x1, reaching ±256 mV only at gain x8) versus the ADS1115's ±6.144 V top range, and a higher minimum supply of 2.7-5.5 V versus 2.0-5.5 V.Microchip datasheet
BEFORE YOU SUBSTITUTE

Pre-replacement checklist

Need the exact lot, date code or a second source quoted?

Send the original MPN and the approved alternative. Sourceics reconfirms source, stock, date code and commercial terms before any order — no substitution without your engineering approval.

Request a quote for ADS1115IDGSR

Source part reference: TI datasheet. Equivalence notes are reference guidance, not a guarantee of fit — always verify against your schematic and layout.