VERIFIED CROSS-REFERENCE
AD7190BRUZ-REEL alternatives & equivalent parts
ADI ultra-low-noise 24-bit sigma-delta ADC with PGA, 2 differential / 4 pseudo-differential inputs and SPI interface, output data rates 4.7 Hz to 4.8 kHz, for bridge and sensor front ends. — common packages: TSSOP-24. Each candidate below cites its manufacturer datasheet; check the relationship badge before substituting.
3 verified alternatives for AD7190BRUZ-REEL
| Alternative | Manufacturer | Relationship | Key differences | Source |
|---|---|---|---|---|
| AD7192 | Analog Devices | Pin-compatibleDrop-in: same footprint and pinout. | Pin-for-pin identical: same 24-lead TSSOP with an exactly matching pinout (clock, SPI, AIN1-AIN4, reference and GPIO pins all align), and its 3 V to 5.25 V AVDD range covers the AD7190's 5 V-only analog rail. The trade-off is noise: RMS noise is 11 nV at 4.7 Hz (gain 128) versus 8.5 nV, and noise-free resolution at 2.4 kHz is 15.5 bits versus 16 bits, while supply current falls from 6 mA to 4.35 mA. | ADI product page & datasheet |
| AD7193 | Analog Devices | Functional alternativeSame function: board or design change needed. | Same AD719x family and register model, but a different tier: 4 differential / 8 pseudo-differential channels (AIN1-AIN8) in a 28-lead TSSOP or 32-lead LFCSP, so it cannot fit the AD7190's 24-lead TSSOP footprint and needs a board redesign. It keeps the 24-bit sigma-delta core with PGA and the same 4.8 kHz maximum output data rate, running from 3 V to 5.25 V at 4.65 mA. | ADI product page & datasheet |
| ADS1256 | Texas Instruments | Functional alternativeSame function: board or design change needed. | Functionally similar 24-bit delta-sigma ADC with PGA and SPI, but different in every physical respect: SSOP-28 package (versus TSSOP-24) with a TI-specific pinout and register map, so it is a redesign rather than a drop-in. It is much faster (data rates to 30 kSPS versus 4.8 kHz) with 4 differential / 8 single-ended inputs, but its digital supply is limited to 1.8-3.6 V (AVDD 4.75-5.25 V) and its temperature rating stops at +85 C versus +105 C for the AD7190. | TI datasheet |
Pre-replacement checklist
- Confirm the footprint: only the AD7192 shares the TSSOP-24 pinout; the AD7193 and ADS1256 need a new layout
- Check the analog supply: the AD7190 is 5 V-only (4.75-5.25 V), the AD7192/AD7193 also allow 3 V rails
- Compare noise at your data rate and gain: the AD7192 is slightly noisier than the AD7190 at low rates
- Check channel count: the AD7193 doubles the inputs; the ADS1256 changes the register map entirely
Need the exact lot, date code or a second source quoted?
Send the original MPN and the approved alternative. Sourceics reconfirms source, stock, date code and commercial terms before any order — no substitution without your engineering approval.
Request a quote for AD7190BRUZ-REELSource part reference: ADI datasheet. Equivalence notes are reference guidance, not a guarantee of fit — always verify against your schematic and layout.