VERIFIED CROSS-REFERENCE
74HC14D,653 alternatives & equivalent parts
Nexperia hex inverting Schmitt trigger: six inverters with Schmitt-trigger inputs that convert slow or noisy input signals into clean, jitter-free outputs, CMOS input levels, 2.0-6.0 V supply. — common packages: SOIC-14 (SOT108-1). Each candidate below cites its manufacturer datasheet; check the relationship badge before substituting.
3 verified alternatives for 74HC14D,653
| Alternative | Manufacturer | Relationship | Key differences | Source |
|---|---|---|---|---|
| SN74HC14DR | Texas Instruments | Pin-compatibleDrop-in: same footprint and pinout. | Same SOIC-14 (D) package, identical standard 74HC14 pinout, same 2-6 V supply range and CMOS input thresholds, so it drops into the source footprint directly. The concrete differences are ratings, not fit: the commercial SN74HC14DR is specified only from -40 C to +85 C versus the source's -40 C to +125 C, and the two vendors' static tables share the same test conditions (4.0 mA at 4.5 V, 5.2 mA at 6.0 V), so there is no substantive drive difference — TI's ±4 mA is a 5 V nominal headline figure and Nexperia's ±5.2 mA the 6.0 V condition figure. If the +125 C range is required, TI's automotive SN74HC14-Q1 (SN74HC14QDRQ1, AEC-Q100 Grade 1, -40 C to +125 C) is the matching orderable instead. | TI datasheet |
| MC74HC14ADR2G | onsemi | Pin-compatibleDrop-in: same footprint and pinout. | Same SOIC-14 package and the standard 74HC14 pinout (onsemi states the pinout is identical to the LS14/HC04 pattern), with the same 2.0-6.0 V operating range, CMOS-level thresholds and +/-5.2 mA output drive class, so the headline electrical specs match the source one-for-one. Its temperature range is even wider at the cold end (-55 C to +125 C), and its guaranteed threshold windows (for example VT+ max 3.15 V at VCC = 4.5 V) align with the JEDEC 7A HC norms the source follows. Caveat: the base MC74HC14A is a catalog part; automotive use requires the AEC-Q100 variants noted in the onsemi datasheet. | onsemi datasheet |
| 74HCT14D,653 | Nexperia | Pin-compatibleDrop-in: same footprint and pinout. | Package and pinout are identical (the same SOT108-1 SO14 from the same combined Nexperia 74HC/HCT14 datasheet), so it physically drops in. Electrically it is a different input family: VCC narrows from 2.0-6.0 V to 4.5-5.5 V only, and the Schmitt thresholds are TTL-level (VT+ is 1.2-1.9 V, typ 1.41 V, at VCC = 4.5 V) versus the HC version's CMOS levels (1.7-3.15 V, typ 2.38 V), so it suits 5 V TTL-driven inputs but is not a like-for-like swap in 3.3 V or wide-supply CMOS designs. Temperature range matches the source at -40 C to +125 C. | Nexperia product page & datasheet |
Pre-replacement checklist
- Confirm the input family: HC (CMOS thresholds, 2-6 V) versus HCT (TTL thresholds, 4.5-5.5 V only)
- Check the temperature range: the catalog SN74HC14DR stops at +85 C; the source and onsemi parts reach +125 C
- Confirm the package: all three candidates here are SOIC-14; the same logic also ships in TSSOP-14 and DIP-14 under other suffixes
Need the exact lot, date code or a second source quoted?
Send the original MPN and the approved alternative. Sourceics reconfirms source, stock, date code and commercial terms before any order — no substitution without your engineering approval.
Request a quote for 74HC14D,653Source part reference: Nexperia product page & datasheet. Equivalence notes are reference guidance, not a guarantee of fit — always verify against your schematic and layout.